Strike-slip tectonic processes in the northern Caribbean between Cuba and Hispaniola (Windward Passage)

Marine geophysical data including Seabeam, seismic reflection, magnetics, gravimetry and side-scan sonar have been recently collected along the northern Caribbean strike-slip plate boundary between Cuba and Hispaniola, in the Windward Passage area. The analysis of this comprehensive data set allows us to illustrate active strike-slip tectonic processes in relation to the kinematics of the Caribbean Plate. We show that the transcurrent plate boundary trace runs straight across the Windward Passage, from the southern Cuban Margin in the west (Oriente Fault) to the Tortue Channel in the east. The Windward Passage Deep is thus not an active pull-apart basin, as previously suggested. The plate boundary geometry implies that the motion of the Caribbean Plate relative to the North American Plate is partitioned between a strike-slip component, accommodated by the Windward Passage active fault zone, and a convergence component, accommodated by compression at the bottom of the Northern Hispaniola Margin. On the basis of a correlation with onland geological data, an age is given to the stratigraphic sequences identified on seismic profiles. A kinematic reconstruction is proposed that follows the tectonic unconformities recognized at sea and on land (Late Eocene, Early Miocene, Middle Miocene and Late Pliocene). Each one of these tectonic events corresponds to a drastic reorganization of the plate boundary geometry. We propose to correlate these events with successive collisions of the northern Caribbean mobile terranes against the Bahamas Bank. During each event, the plate boundary trace is shifted to the south and a part of the Caribbean Plate is accreted to North America.     

Pore pressure assessment from well data and overpressure mechanism: Case study in Eastern Tunisia basins

Abstract

Independent and complementary methods were used for pore pressure assessment in the eastern Tunisian basins. Drilling data and surveys allow settling the pore pressure profile in these basins. The main used parameters are mud weights, formation pressure surveys, drilling parameters, well logs, fluids exchange with formation and borehole issues. In the eastern Tunisia platform, the pore pressure profiles show changes in overpressure magnitude in all the three dimensions of the basin (location and depth/stratigraphy). We highlighted two overpressure intervals form bottom to top: The late Cretaceous in the North-eastern part, and the Tertiary overpressure interval hosted in the Palaeocene to Miocene series. The structural analysis of overpressure location shows that the Tertiary interval is likely to have originated in a disequilibrium compaction in Cenozoic grabens. Pore pressure cross sections and maps confirm the link between active normal faults that segmented the basin to grabens and highs and pore pressure anomalous area. In the Senonian interval, we noted mature source-rocks that can explain the overpressure in the late Cretaceous interval. In addition, the recent to active compressive tectonics may have contributed to both pore pressure anomaly generations. The fluid overpressures characterization in the eastern Tunisian sedimentary basins helps in hydrocarbons exploration. Indeed, the overpressure interval in the reservoir levels stimulates and improves the production in the oilfields and contributes to hydrocarbon trapping. Moreover, the adequate prediction of pore pressure profile contributes to reduce drilling cost and enhance the drilling operations safety.     

Comparison between deformation deduced from the analysis of recent faults and from focal mechanisms of earthquakes (An example: The Paphos region,Cyprus)

The authors have made a comparative study of surface deformations deduced from the analysis of recent faults, and deformation in depth deduced from, focal mechanisms associated with shallow earthquakes. The initial results obtained in the Paphos region of Cyprus are presented.Study of striations on centi- to decametric-scale fracture surfaces which affect Plio-Quaternary beaches in the Paphos region has enabled the authors to determine statistically the position of the principal axes of Plio-Quaternary deformation: lengthening X (strike N32°, dip 12°NE), shortening Z (N297°, 23°NW) and intermediate Y (N138°, 65°SE).On the 10th of September 1953 a superficial earthquake (depth 6 km) of 6.5 magnitude occurred near Paphos (location 34.9°N, 32.2°E) whose focal mechanism has been studied. Fault-plane solutions were obtained using 36 data points relating to the initial movements of the P-waves measured by longand short-period seismographs. Unfortunately the distribution of data with respect to the focus is such that it does not permit a single, but rather three possible solutions. Two of these are compatible with the model of deformation deduced from surface study. While the most probable solution favours a normal fault (solution no. 3), the system of deep strike-slip faults (solution no. 2) is equally compatible with the existence of predominantly normal surface faults.The preliminary results constitute part of a more regional study of the eastern Mediterranean. The authors consider it fundamental to establish this type of correlation when studying neotectonics.     

Combining T/P altimetric data with hydrographic data to estimate the mean dynamic topography of the North Atlantic and improve the geoid

The mean dynamic topography of the surface of the North Atlantic is estimated using an inverse model of the ocean circulation constrained by hydro-graphic and altimetric observations. In the North Atlantic, altimetric observations have no significant impact on the topography estimate because of the limited precision of available geoid height models. They have a significant impact, however, when uncertainties in the density field are increased to simulate interpolation errors in regions where hydrographic data are scarce. This result, which moderates the conclusion drawn by Ganachaud and co-workers of no significant contribution of altimetric observations to the determination of the large-scale steady circulation, reflects the simple idea that altimetric data are most useful near the surface of the ocean and in areas where the hydrography is poorly determined. One application of the present inverse estimate of the mean dynamic topography is to compute a geoid height correction over the North Atlantic which reduces the uncertainty in the geoid height expanded to spherical harmonic 40 down to a level of about 5 cm.     

Melt percolation and reaction atop a plume: evidence from the poikiloblastic peridotite xenoliths from Borée (Massif Central, France)

Poikiloblastic harzburgite xenoliths (P-type) from Borée, France are characterised by large (>1 cm), essentially unstrained olivines and high equilibrium temperatures (>1200 °C). Mineralogical data, trace element abundances and Sr-Nd-O isotopes of the constituent minerals are consistent with formation as a result of melt percolation-reactions in a lherzolite precursor during lithospheric erosion by an upwelling plume. This petrogenetic model contrasts with previous models involving isochemical recrystallisation from a granular lherzolite precursor (G-type) or derivation as metacumulates from tholeiitic magmas. Numerical simulation of percolation reactions at the lithosphere-plume boundary using the plate model of Vernières et al. (1997) indicates that the different textured xenoliths may represent mantle from different levels in a percolation-reaction column. If correct then the P-type harzburgites resulted from pyroxene-dissolving and olivine-producing reactions at increasing melt fraction (>3%) at the lower part of column (base of the lithosphere), whereas the G-type lherzolites were located within the low-porosity domain (<0.1%) above a permeability barrier, and are formed through a melt-rock reaction at decreasing melt mass. Given the very low melt fraction, the REE fractionation in this zone is controlled by chromatographic effects coupled with source effects of reaction. The variations in porosity, melt/rock ratio and melt-rock reaction mechanism are believed to be responsible for the diversity of REE patterns and striking correlation between REE abundance and texture in Borée xenoliths. Received: 15 June 1997 / Accepted: 7 January 1998     

Tectonic and Kinematic Regime along the Northern Caribbean Plate Boundary: New Insights from Broad-band Modeling of the May 25, 1992, Ms = 6.9 Cabo Cruz, Cuba, Earthquake

—On May 25th, 1992, an M _s = 6.9 earthquake occurred off the southwestern tip of Cuba, along the boundary between the Caribbean and North American plates. This earthquake was the largest to strike southern Cuba since 1917 and the largest ever recorded in that region by global seismic networks. It is therefore a key element for our understanding of the tectonic and kinematic regime along the northern Caribbean plate boundary. In order to test the previously proposed source parameters of the Cabo Cruz earthquake and to better constrain its focal mechanism, we derived a new set of source parameters from unfiltered broad-band teleseismic records. We used a hybrid ray tracing method that allows us to take into account propagation effects of seismic waves in a realistic crustal model around the source. Our solution is consistent with the long-period focal mechanism solution of Virieux et al. (1992). Our solution also models the higher frequency crustal and water layer phases. The primarily strike-slip focal mechanism has a small thrust component. Its shows an east-west trending nodal plane dipping 55° to the north that we interpret as the rupture plane since it corresponds to the geometry of the major active fault in that area. The displacement on this plane is a left-lateral strike-slip combined with a small amount of southward thrust. The result is in good agreement with the active tectonic structures observed along the Oriente fault south of Cuba. The small thrust component demonstrates that, contrary to prior belief, the transpressive regime extends along this whole segment of the Caribbean/North American plate boundary. Together with historical seismicity, it suggests that most of the stress accumulated by the Caribbean/North American plate motion is released seismically along the southern Cuban margin during relatively few but large earthquakes.     

A numerical method for determining the state of stress using focal mechanisms of earthquake populations: application to Tibetan teleseisms and microseismicity of Southern Peru

The numerical method described in this paper enables the study in terms of stress of the kinematics of seismic faults provided by focal mechanisms. This method assumes a mean state of stress in the source region and is based on the simple mechanical model used for fault population analysis which supposes slip in the direction of the resolved shear stress acting on the fault plane. The proposed algorithm first defines compressional and tensional zones resulting from superimposition of the compressional and tensional quadrants limited by the nodal planes. This enables one to test the data homogeneity. Furthermore, this restricts the space where the principal stress axes have to be searched. Then, for each principal stress reference whose location is constrained by above confined zones, the R value (chosen equal to (σ₂′ − σ₁′)/(σ₃′ − σ₁′)) is computed which fits the slip vector on each nodal plane. This permits one to select a set of preferred seismic fault planes from a set of auxiliary planes. Finally, a state of stress is computed from the preferred seismic fault plane set using the non-linear simplex method already applied to fault populations. This algorithm is constructed so as to avoid two major difficulties: misleading estimation of the deviatoric stress tensor which may result from excessive emphasis by minimizing the residuals by a least squares method if some of the data are wrong and a lengthy prospection of the stress references over all the space of directions. This calculation does not take into account possible changes of the strike and dip of the nodal planes. However, we use rotations of nodal planes in agreement with the first arrival data to test the compatibility of these data with the computed state of stress. Tibetan teleseisms and southern Peruvian microseisms are analyzed and results are compared with kinematics of superficial recent and active faults measured in field in the same regions. This suggests that major seismic events may give a good evaluation of the regional (mean) state of stress. Focal mechanisms of the small events are also modelled by a mean stress deviator, but this differs significantly from the regional state of stress in southern Peru deduced from Quaternary faulting. This may be due to imprecise location of the small events. However, some movements are strongly different from those predicted by the computed mean stress deviator. This suggests that small fault kinematics surely depend on the regional state of stress but that local effects may control the small deformations.     

Oxygen isotope systematics of gem corundum deposits in Madagascar: relevance for their geological origin

The oxygen isotopic composition of gem corundum was measured from 22 deposits and occurrences in Madagascar to provide a gemstone geological identification and characterization. Primary corundum deposits in Madagascar are hosted in magmatic (syenite and alkali basalt) and metamorphic rocks (gneiss, cordieritite, mafic and ultramafic rocks, marble, and calc-silicate rocks). In both domains the circulation of fluids, especially along shear zones for metamorphic deposits, provoked in situ transformation of the corundum host rocks with the formation of metasomatites such as phlogopite, sakenite, and corundumite. Secondary deposits (placers) are the most important economically and are contained in detrital basins and karsts. The oxygen isotopic ratios (¹⁸O/¹⁶O) of ruby and sapphire from primary deposits are a good indicator of their geological origin and reveal a wide range of δ¹⁸O (Vienna Standard Mean Ocean Water) between 1.3 and 15.6‰. Metamorphic rubies are defined by two groups of δ¹⁸O values in the range of 1.7 to 2.9‰ (cordieritite) and 3.8 to 6.1‰ (amphibolite). “Magmatic” rubies from pyroxenitic xenoliths contained in the alkali basalt of Soamiakatra have δ¹⁸O values ranging between 1.3 and 4.7‰. Sapphires are classified into two main groups with δ¹⁸O in the range of 4.7 to 9.0‰ (pyroxenite and feldspathic gneiss) and 10.7 to 15.6‰ (skarn in marble from Andranondambo). The δ¹⁸O values for gem corundum from secondary deposits have a wide spread between −0.3 and 16.5‰. The ruby and sapphire found in placers linked to alkali basalt environments in the northern and central regions of Madagascar have consistent δ¹⁸O values between 3.5 and 6.9‰. Ruby from the placers of Vatomandry and Andilamena has δ¹⁸O values of 5.9‰, and between 0.5 and 4.0‰, respectively. The placers of the Ilakaka area are characterized by a huge variety of colored sapphires and rubies, with δ¹⁸O values between −0.3 and 16.5‰, and their origin is debated. A comparison with oxygen isotope data obtained on gem corundum from Eastern Africa, India, and Sri Lanka is presented. Giant placer deposits from Sri Lanka, Madagascar, and Tanzania have a large variety of colored sapphires and rubies with a large variation in δ¹⁸O due to mingling of corundum of different origin: mafic and ultramafic rocks for ruby, desilicated pegmatites for blue sapphire, syenite for yellow, green, and blue sapphire, and skarn in marbles for blue sapphire.