An Overview of Dissolved and Suspended Matter Fluxes in the Loire River Basin: Natural and Anthropogenic Inputs

The spatial and temporal distributions of major elements were investigated in the surface waters and in associated suspended matter at two sites of the upper Loire basin (Orleans and Brehemont) between 1995 and 1998.According to geochemical and isotopic patterns, the dissolved load appears to result from a process of mixing rainwater inputs, weathering processes of carbonate and silicate bedrock, and agricultural and urban inputs. Natural inputs influence 60% of water chemical composition at both sites. Annual dissolved fluxes were estimated to be 1300 10³ t/y at Orleans and 1620 10³ t/y at Brehemont. Major elements are transported mainly in the dissolved fraction. After correcting for atmospheric and anthropogenic inputs, the silicate specific export rate was calculated to be 11 t/y/km² throughout the basin and the carbonate specific export rate to be from 47 t/y/km² at Orleans to 23 t/y/km² at Brehemont.The suspended load appears to result from at least two particle reservoirs: a silicate reservoir and a carbonate reservoir. The silicate reservoir has a detrital origin, mainly during periods of high flow, while the carbonate reservoir has a detrital origin during periods of high flow and an authigenic origin during periods of low flow. Of the total annual flow of suspended matter, this authigenic material represents 16% at Orleans, 25% at Brehemont and 37% in the fluvial part of the estuary. After correcting authigenic inputs, the specific export rate due to mechanical weathering was estimated to be 8 t/y/km² throughout the Loire basin.     

The Removal of Dissolved Metals by Hydroxysulphate Precipitates during Oxidation and Neutralization of Acid Mine Waters, Iberian Pyrite Belt

This study examines the removal of dissolved metals during the oxidation and neutralization of five acid mine drainage (AMD) waters from La Zarza, Lomero, Esperanza, Corta Atalaya and Poderosa mines (Iberian Pyrite Belt, Huelva, Spain). These waters were selected to cover the spectrum of pH (2.2–3.5) and chemical composition (e.g., 319–2,103 mg/L Fe; 2.85–33.3 g/L SO₄⁼) of the IPB mine waters. The experiments were conducted in the laboratory to simulate the geochemical evolution previously recognized in the field. This evolution includes two stages: (1) oxidation of dissolved Fe(II) followed by hydrolysis and precipitation of Fe(III), and (2) progressive pH increase during mixing with fresh waters. Fe(III) precipitates at pH < 3.5 (stages 1 and 2) in the form of schwertmannite, whereas Al precipitates during stage 2 at pH 5.0 in the form of several hydroxysulphates of variable composition (hydrobasaluminite, basaluminite, aluminite). During these stages, trace elements are totally or partially sorbed and/or coprecipitated at different rates depending basically on pH, as well as on the activity of the SO₄⁼ anion (which determines the speciation of metals). The general trend for the metals which are chiefly present as aqueous free cations (Pb²⁺, Zn²⁺, Cu²⁺, Cd²⁺, Mn²⁺, Co²⁺, Ni²⁺) is a progressive sorption at increasing pH. On the other hand, As and V (mainly present as anionic species) are completely scavenged during the oxidation stage at pH < 3.5. In waters with high activities (> 10⁻¹) of the SO ₄⁼ ion, some elements like Al, Zn, Cd, Pb and U can also form anionic bisulphate complexes and be significantly sorbed at pH < 5. The removal rates at pH 7.0 range from around 100% for As, V, Cu and U, and 60–80% for Pb, to less than 20% for Zn, Co, Ni and Mn. These processes of metal removal represent a significant mechanism of natural attenuation in the IPB.     

Evaluation of methods of spatial interpolation for monthly rainfall data over the state of Rio de Janeiro,Brazil

Five deterministic methods of spatial interpolation of monthly rainfall were compared over the state of Rio de Janeiro, southeast Brazil. The methods were the inverse distance weight (IDW), nearest neighbor (NRN), triangulation with linear interpolation (TLI), natural neighbor (NN), and spline tension (SPT). A set of 110 weather stations was used to test the methods. The selection of stations had two criteria: time series longer than 20 years and period of data from 1960 to 2009. The methods were evaluated using cross-validation, linear regression between values observed and interpolated, root mean square error (RMSE), coefficient of determination (r ²), coefficient of variation (CV, %), and the Willmott index of agreement (d). The results from different methods are influenced by the meteorological systems and their seasonality, as well as by the interaction with the topography. The methods presented higher precision (r ²) and accuracy (d, RMSE) during the summer and transition to autumn, in comparison with the winter or spring months. The SPT had the highest precision and accuracy in relation to other methods, in addition to having a good representation of the spatial patterns expected for rainfall over the complex terrain of the state and its high spatial variability.     

Some Insights into Topographic,Elastic and Self-gravitation Interaction in Modelling Ground Deformation and Gravity Changes in Active Volcanic Areas

Surface displacements and gravity changes due to volcanic sources are influenced by medium properties. We investigate topographic, elastic and self-gravitation interaction in order to outline the major factors that are significant in data modelling. While elastic-gravitational models can provide a suitable approximation to problems of volcanic loading in areas where topographic relief is negligible, for prominent volcanoes the rough topography could affect deformation and gravity changes to a greater extent than self-gravitation. This fact requires the selection, depending on local relief, of a suitable model for use in the interpretation of surface precursors of volcanic activity. We use the three-dimensional Indirect Boundary Element Method to examine the effects of topography on deformation and gravity changes in models of magma chamber inflation/deflation. Topography has a significant effect on predicted surface deformation and gravity changes. Both the magnitude and pattern of the geodetic signals are significantly different compared to half-space solutions. Thus, failure to account for topographic effects in areas of prominent relief can bias the estimate of volcanic source parameters, since the magnitude and pattern of deformation and gravity changes depend on such effects.     

North Atlantic atmospheric circulation and surface wind in the Northeast of the Iberian Peninsula: uncertainty and long term downscaled variability

The variability and predictability of the surface wind field at the regional scale is explored over a complex terrain region in the northeastern Iberian Peninsula by means of a downscaling technique based on Canonical Correlation Analysis. More than a decade of observations (1992–2005) allows for calibrating and validating a statistical method that elicits the main associations between the large scale atmospheric circulation over the North Atlantic and Mediterranean areas and the regional wind field. In an initial step the downscaling model is designed by selecting parameter values from practise. To a large extent, the variability of the wind at monthly timescales is found to be governed by the large scale circulation modulated by the particular orographic features of the area. The sensitivity of the downscaling methodology to the selection of the model parameter values is explored, in a second step, by performing a systematic sampling of the parameters space, avoiding a heuristic selection. This provides a metric for the uncertainty associated with the various possible model configurations. The uncertainties associated with the model configuration are considerably dependent on the spatial variability of the wind. While the sampling of the parameters space in the model set up moderately impact estimations during the calibration period, the regional wind variability is very sensitive to the parameters selection at longer timescales. This fact illustrates that downscaling exercises based on a single configuration of parameters should be interpreted with extreme caution. The downscaling model is used to extend the estimations several centuries to the past using long datasets of sea level pressure, thereby illustrating the large temporal variability of the regional wind field from interannual to multicentennial timescales. The analysis does not evidence long term trends throughout the twentieth century, however anomalous episodes of high/low wind speeds are identified.     

Synoptic and mesoscale study of a severe convective outbreak with the nonhydrostatic Global Environmental Multiscale (GEM) model

Summary ?A nonhydrostatic 4-km version of the Global Environmental Multiscale (GEM) model, with detailed microphysics included, was used to forecast the initiation, development, and structure of a tornado-producing supercell storm that occurred near Pine Lake (Alberta, Canada) on 15 July 2000. Examination of observations and comparison with conceptual models indicate that this storm is a good example of supercell storms that regularly produce summertime severe weather over Alberta. It was found that the high-resolution model was able to reproduce the early initiation of convective activity along the Rocky Mountains foothills, as well as the rapid northeastward propagation towards the Pine Lake area and the subsequent intensification into a supercell storm. The general structures of the forecasted convective system correspond well with conceptual representations of such events. Overall, this high-resolution forecast of the Pine Lake supercell storm was a significant improvement over the current operational version of the GEM model (24 km), which was not able to intensify the foothills’ convection into a supercell storm. Finally, it was found that the nonhydrostatic version of the model produces better trajectory and propagation speed of the convective system, as compared with the hydrostatic one. Received March 20, 2001; revised August 24, 2001     

Estimation of Surface-Layer Scaling Parameters in the Unstable Boundary Layer: Implications for Orographic Flow Speed-Up

A method is proposed for estimating the surface-layer depth \((z_s)\) and the friction velocity \((u_*)\) as a function of stability (here quantified by the Obukhov length, L) over the complete range of unstable flow regimes. This method extends that developed previously for stable conditions by Argaín et al. (Boundary-Layer Meteorol 130:15–28, 2009), but uses a qualitatively different approach. The method is specifically used to calculate the fractional speed-up \((\varDelta S)\) in flow over a ridge, although it is suitable for more general boundary-layer applications. The behaviour of \(z_s \left( L\right) \) and \(u_*\left( L\right) \) as a function of L is indirectly assessed via calculation of \(\varDelta S\left( L\right) \) using the linear model of Hunt et al. (Q J R Meteorol Soc 29:16–26, 1988) and its comparison with the field measurements reported in Coppin et al. (Boundary-Layer Meteorol 69:173–199, 1994) and with numerical simulations carried out using a non-linear numerical model, FLEX. The behaviour of \(\varDelta S\) estimated from the linear model is clearly improved when \(u_*\) is calculated using the method proposed here, confirming the importance of accounting for the dependences of \(z_s\left( L \right) \) and \(u_*\left( L \right) \) on L to better represent processes in the unstable boundary layer.     

Anthropogenic climate change over the Mediterranean region simulated by a global variable resolution model

Two 30-year simulations corresponding to 1960-1989 and 2070-2099 have been performed with a variable resolution atmospheric model. The model has a maximum horizontal resolution of 0.5° over the Mediterranean Sea. Simulations are driven by IPCC-B2 scenario radiative forcing. Sea surface temperatures (SSTs) are prescribed from monthly observations for the present climate simulation, and from a blend of observations and coupled simulations for the scenario. Another pair of forced atmospheric simulations has been run under these forcings with the same uniform low resolution as the coupled model. Comparisons with observations show that the variable resolution model realistically reproduces the main climate characteristics of the Mediterranean region. At a global scale, changes in latitudinal temperature profiles are similar for the forced and coupled models, justifying the time-slice approach. The 2 m temperature and precipitation responses predict a warming and drying of the Mediterranean region. A comparison with the coupled simulation and forced low-resolution simulation shows that this pattern is robust. The decrease in mean precipitation is associated with a significant decrease in soil wetness, and could involve considerable impact on water resources around the Mediterranean basin.     

Adsorption of cobalt by using inorganic components of sediment samples from water bodies

The adsorption of cobalt ions was evaluated using sediment samples from water bodies to investigate the adsorption properties of sediment and the behavior of these natural materials in the presence of nuclear and industrial waste.The two sediments(S1 and S2)were treated to eliminate humic and fulvic acids and then they were characterized by several techniques.The minerals found in both the sediments(X-ray diffraction)were quartz and albite;plus,goethite and muscovite in S1,and kaolinite and montmorillonite in S2.Point of zero charge(PZC)of S1 and S2 was 6.00 and 5.22,respectively.The specific area of S1(63.3 m²/g)is higher than S2(1.5 m²/g).Adsorption kinetics data for S1 and S2 were best fitted to the pseudo second-order model.The removal efficiency of S1 for cobalt was 96%with an adsorption capacity(qe)of 0.93 mg/g,and for S2 was 45%with a qeof 0.40 mg/g.The experimental data of the adsorption isotherms were adjusted to Langmuir and Freundlich models for S1 and S2,respectively.The thermodynamic parameters(enthalpy,entropy,and Gibb’s free energy)indicated that the adsorption processes were endothermic,spontaneous,and chemisorption mechanism.The results show that the adsorption capacities of the sediments depend on their composition.These water sediments have important adsorption properties for cobalt,and they can be used in the treatment of nuclear and industrial aqueous wastes.     

Middle Paleolithic occupation on a Marine Isotope Stage 5 lakeshore in the Nefud Desert,Saudi Arabia

Major hydrological variations associated with glacial and interglacial climates in North Africa and the Levant have been related to Middle Paleolithic occupations and dispersals, but suitable archaeological sites to explore such relationships are rare on the Arabian Peninsula. Here we report the discovery of Middle Paleolithic assemblages in the Nefud Desert of northern Arabia associated with stratified deposits dated to 75,000 years ago. The site is located in close proximity to a substantial relict lake and indicates that Middle Paleolithic hominins penetrated deeply into the Arabian Peninsula to inhabit landscapes vegetated by grasses and some trees. Our discovery supports the hypothesis of range expansion by Middle Paleolithic populations into Arabia during the final humid phase of Marine Isotope Stage 5, when environmental conditions were still favorable.