N and O isotope effects during nitrate assimilation by unicellular prokaryotic and eukaryotic plankton cultures

In order to provide biological systematics from which to interpret nitrogen (N) and oxygen (O) isotope ratios of nitrate (¹⁵N/¹⁴N, ¹⁸O/¹⁶O, respectively) in the environment, we previously investigated the isotopic fractionation of nitrate during its assimilation by mono-cultures of eukaryotic algae (Granger et al., 2004). In this study, we extended our analysis to investigate nitrate assimilation by strains of prokaryotic plankton. We measured the N and O isotope effects, ¹⁵ε and ¹⁸ε, during nitrate consumption by cultures of prokaryotic strains and by additional eukaryotic phytoplankton strains (where ε is the ratio of reaction rate constants of the light vs. heavy isotopologues, ^lightk and ^heavyk; ε = ^lightk/^heavyk − 1 × 1000, expressed in per mil). The observed ¹⁵ε ranged from 5‰ to 8‰ among eukaryotes, whereas it did not exceed 5‰ for three cyanobacterial strains, and was as low as 0.4‰ for a heterotrophic α-protoeobacterium. Eukaryotic phytoplankton fractionated the N and O isotopes of nitrate to the same extent (i.e., ¹⁸ε ∼ ¹⁵ε). The ¹⁸ε:¹⁵ε among the cyanobacteria was also ∼1, whereas the heterotrophic α-proteobacterial strain, which showed the lowest ¹⁵ε, between 0.4‰ and 1‰, had a distinct ¹⁸ε:¹⁵ε of ∼2, unlike any plankton strain observed previously. Equivalent N vs. O isotope discrimination is thought to occur during internal nitrate reduction by nitrate reductase, such that the cellular efflux of the fractionated nitrate into the medium drives the typically observed ¹⁸ε:¹⁵ε of ∼1. We hypothesize that the higher in the ¹⁸ε:¹⁵ε of the α-proteobacterium may result from isotope discrimination by nitrate transport, which is evident only at low amplitude of ε. These observations warrant investigating whether heterotrophic bacterial assimilation of nitrate decreases the community isotope effects at the surface ocean.     

Integration of reflection seismic and sediment grain-size data from Lake Khubsugul (Northern Mongolia): a reply to Prokopenko and Kendall

Prokopenko and Kendall (J Paleolimnol doi:, 2008) criticise the work presented in Fedotov et al. (J Paleolimnol 39:335–348, 2008), and instead propose an alternative interpretation for the grain-size evolution recorded in the KDP-01 core, retrieved from the central part of Lake Khubsugul. Their interpretation is based (i) on a seismic-stratigraphic re-interpretation of sparker seismic profile khub012 (which they copied from Fedotov et al. (EOS Trans 87:246–250, 2006)), (ii) on the presupposition that changes in lake level are the dominant control on facies distribution in Lake Khubsugul, and (iii) on the invalidation of our age-depth model. In this reply to their comment, we demonstrate that they interpreted seismic artefacts and geometries caused by changes in profile orientation as true stratigraphic features and that the lake-level reconstruction they derive from this interpretation is therefore incorrect. We also demonstrate that their grain-size predictions, which they consider to be predominantly driven by changes in lake level, are inconsistent with the measured sulphate concentration, which is a demonstrated proxy of lake level in Lake Khubsugul, and with the measured grain-size record. Finally, we point out that even if there would be a problem with the age-depth model, this problem would not affect the part of the sedimentary sequence discussed in Fedotov et al. (J Paleolimnol 39:335–348, 2008).     

Facies Structure and Quantitative Parameters of Pleistocene Sediments of the Bering Sea

Lithofacies zoning is described for the first time for the Neo- and Eopleistocene of the Bering Sea. Four lithofacies sedimentation zones are distinguished: (I) terrigenous; (II) siliceous–terrigenous; (III) siliceous, and (IV) volcanoterrigenous ones. Corresponding maps were treated using Ronov volumetric method to quantify sedimentation parameters for distinguished lithofacies zones (subzones) and types of Pleistocene sediments. It was revealed that terrigenous sediments predominate over other sediments. Accumulation of the terrigenous sediments was more intense (by 1.4 times) in the Neopleistocene than in the Eopleistocene. The sedimentation rate of siliceous sediments of the Bowers Ridge in the Eopleistocene was two times higher than in the Neopleistocene.     

Rockburst research at Falconbridge's Strathcona Mine,Sudbury, Canada

Microseismic systems at five mines in the Sudbury Basin provide the basic data for Falconbridge Limited's rockburst research. Daily and long-term analysis of this data as well as underground observations have confirmed the fault-slip mechanism at three mines. A detailed analysis of the complete history of Falconbridge Mine is being conducted and Distinct Element numerical models are being used to simulate both the stick-slip behaviour of faults and the dynamic effects of the induced vibrations on rock and backfill. University research includes acoustic tomographic imaging of the rock mass based on seismic wave propagation and collection of full microseismic waveforms to allow application of advanced seismic and statistical analysis techniques.Formerly with Mines Technical Services, Falconbridge Limited, Sudbury Operations, Falconbridge , Ont., P0M 1S0.Presented at the Fred Leighton Memorial Workshop on Mining Induced Seismicity, Montreal, Canada, August 30, 1987.     

Meridional transport of sensible heat in contrasting monsoon activity: Spherical harmonic analysis

Spherical harmonic analysis is made of the grid point values of geopotential heights at 700 mb and 300 mb levels for the months April to August for the years 1967 and 1972. The year 1967 is a good monsoon year and 1972 is a bad monsoon year in India. Meridional transport of sensible heat is obtained in wave number domain using spherical harmonic coefficients at 500 mb level form=1 to 10 andn–m=0 to 10, wherem represents the wave number round the globe andn–m gives the numbers of zero points from north pole to south pole excluding the poles themselves.Large northward transports of sensible heat in the month of May and in the monsoon months at the subtropics are characteristic of bad monsoon. Wave 1 transports sensible heat southward (forn–m=0) and wave 2 transports sensible heat northward (forn–m=4). Strengthening of wave 1 is conducive to good monsoon year and strengthening of wave 2 is conducive to bad monsoon year. These are the same features obtained in Fourier analysis. The contrasting features exist in waves 1 and 2 both in good and in bad monsoon and are better defined in the present analysis than in the Fourier analysis of the earlier study. However, waves 1 and 2 reveal clearer contrast in the present analysis than in the Fourier analysis. Bad monsoon activity is associated with large divergence of heart at subtropics and large convergence of heat at extra tropics.     

First Data on the Isotopic Age of Zircons from Rocks of the Roseta Ultramafic Massif,Southern Margin of the São Francisco Craton (Brazil)

Doklady Earth Sciences - The results of isotope U–Pb dating of zircons from lherzolite and vein olivine orthopyroxenite composing the Roseta ultramafic massif are presented. The zircons...     

Influence of wind upon water quality in Liverpool Bay

Comprehensive distribution patterns of physical and chemical characteristics have been obtained from a series of cruises in Liverpool Bay. The marked feature of these distributions was their temporal variability, suggesting that the surface residual circulation is also temporally variable. The influence of wind stress upon the circulation pattern and hence water quality of this sea area is illustrated.     

Multidimensional statistical technique for detection of low contrast geochemical anomalies

In this article we propose an advanced technique for detecting low contrast geochemical anomalies using a set of features. There are three principal elements in this technique: (1) a statistical measure of the contrast of the anomaly, denoted as τ; (2) selection of a background population; and (3) reduction of the dimensionality of the feature space. In the frame of the model, which describes the statistical distribution of geochemical background as a multidimensional normal distribution of logarithms of concentrations, the index, τ, is a powerful test statistic for the hypothesis of abnormality of an observation. Maps of τ anomalies can be rigorously interpreted on the basis of statistical inferences. Under all equal conditions this technique allows the detection of geochemical anomalies with at least the same contrast (if the chemical elements in a background population are correlated, then even the better) as using selective extractions of metals from soil or other techniques for data processing. The advantages of the proposed technique are demonstrated both theoretically and on examples of rare-metal and copper–nickel mineral deposits.     

Data base management system for erosivity values

In order to check the premature siltation of the reservoirs and guard against the drop in the irrigation potential, the Government of India has launched the schemes of soil conservation and integrated watershed management in the catchments of RVPs and Flood Prone rivers. Owing to the large financial and manpower commitments needed to implement and execute soil conservation measures over vast catchment areas, a priority approach for treatment was identified. The methodology developed for prioritization of watersheds of a catchment area conceptualizes sedimentation of the reservoirs as a multiplicative function of erosivity value and the delivery ratio. This paper deals with the development of a computerized data base software module ‘WEIGHT’ for determination of erosivity values for the mapping units comprising assemblages of the varying combinations of climate, physiography and slope, land use and cover conditions, soil characteristics (texture, solumn thickness, permeability and pH) and the existing erosion and soil conservation measures. The WEIGHT software package is coded in FORTRON-4 for PDP 11/83 operating system. the data base comprises storage of the attributes of the different erosivity determinants of the mapping units with predetermined erosivity values sequentially on a disk and comparing the attributes of a new mapping unit to get the most probabilities erosivity value. The objective has been to eliminate the personal bias and bring about the objectivity in the process of assigning erosivity values to the different mapping units. The data base design, design logic and operational sequence of the data base are discussed in the paper.     

A robust algorithm for ellipse-based discrete element modelling of granular materials

With recent research indicating the importance of the rolling mechanism of deformation in granular systems consisting of perfectly round particles, it has become popular to use ellipse-shaped particles in the Discrete Element Method (DEM) numerical model. Inherent in this technique is the need for accurately computing ellipse to ellipse intersection, in order to properly detect contact formation and compute relative contact velocities. However, the commonly used algorithms for computing ellipse-ellipse intersection are generally poorly conditioned and can be inaccurate. An alternate method for computing ellipse-ellipse intersection is developed and presented which results in a well-conditioned, stable and accurate contact detection method. These modification are incorporated into the general DEM algorithm.