A kinematic GPS methodology for sea surface mapping,Vanuatu

During the past few decades, satellite altimetry has brought tremendous new knowledge about the spatial and temporal variations of sea surface heights over the Earth’s oceans. However, the precision is limited over short wavelengths and in coastal areas, and other methods such as kinematic GPS may be needed to fill in this information. We present kinematic GPS work aimed at mapping the sea surface height, with special attention to the precision one can expect. Active marine subduction zones, like the Vanuatu archipelago, may present short wavelength, high amplitude undulations of the sea surface height that are difficult to map with satellite altimetry. This paper presents the methodology used around Santo Island, in Vanuatu, to obtain a well-resolved local sea surface map with a precision of 5–15 cm limited by the sea conditions and the distance from the coastal reference station. We present the results of three campaigns in 2004, 2006 and 2007. Careful observation of the ship behaviour along the surveys as well as simultaneous recording of the ship attitude variations is mandatory to obtain reliable results. We show that the ship GPS antenna height varies with the ship’s velocity and we suggest a method to correct this effect. The final precision is estimated using the crossover differences method.     

SPIRIT. SPOT 5 stereoscopic survey of Polar Ice: Reference Images and Topographies during the fourth International Polar Year (2007–2009)

Monitoring the evolution of polar glaciers, ice caps and ice streams is of utmost importance because they constitute a good indicator of global climate change and contribute significantly to ongoing sea level rise. Accurate topographic surveys are particularly relevant as they reflect the geometric evolution of ice masses. Unfortunately, the precision and/or spatial coverage of current satellite missions (radar altimetry, ICESat) or field surveys are generally insufficient. Improving our knowledge of the topography of Polar Regions is the goal of the SPIRIT (SPOT 5 stereoscopic survey of Polar Ice: Reference Images and Topographies) international polar year (IPY) project. SPIRIT will allow (1) the acquisition of a large archive of SPOT 5 stereoscopic images covering most polar ice masses and, (2) the delivery of digital terrain models (DTM) to the scientific community.Here, we present the architecture of this project and the coverage achieved over northern and southern polar areas during the first year of IPY (July 2007 to April 2008). We also provide the first accuracy assessments of the SPIRIT DTMs. Over Jakobshavn Isbrae (West Greenland), SPIRIT elevations are within ±6 m of ICESat elevations for 90% of the data. Some comparisons with ICESat profiles over Devon ice cap (Canada), St Elias Mountains (Alaska) and west Svalbard confirm the good overall quality of the SPIRIT DTMs although large errors are observed in the flat accumulation area of Devon ice cap. We then demonstrate the potential of SPIRIT DTMs for mapping glacier elevation changes. The comparison of summer-2007 SPIRIT DTMs with October-2003 ICESat profiles shows that the thinning of Jakobshavn Isbrae (by 30–40 m in 4 years) is restricted to the fast glacier trunk. The thinning of the coastal part of the ice stream (by over 100 m) and the retreat of its calving front (by up to 10 km) are clearly depicted by comparing the SPIRIT DTM to an ASTER April-2003 DTM.     

Sea urchin overgrazing of seagrasses: A review of current knowledge on causes, consequences, and management

Sea urchins are one of the most common seagrass macro-grazers in contemporary seagrass systems. Occasionally their grazing rates exceed seagrass growth rates, a phenomenon sometimes referred to as overgrazing. Because of a reported increasing frequency of overgrazing events, concomitant with loss of seagrass-associated ecosystem services, it has been suggested that overgrazing is one of the key threats to tropical and subtropical seagrasses. In light of this, we review the current knowledge on causes, consequences, and management of sea urchin overgrazing of seagrasses. Initially we argue that the definition of overgrazing must include scale and impairment of ecosystem services, since this is the de facto definition used in the literature, and will highlight the potential societal costs of seagrass overgrazing. A review of 16 identified cases suggests that urchin overgrazing is a global phenomenon, ranging from temperate to tropical coastal waters and involving at least 11 seagrass and 7 urchin species. Even though most overgrazing events seem to affect areas of <0.5 km², and recovery often occurs within a few years, overgrazing can have a range of large, long-term indirect effects such as loss of associated fauna and decreased sediment stabilization. A range of drivers behind overgrazing have been suggested, including bottom-up (nutrient enrichment), top-down (reduced predation control due to e.g. overfishing), “side-in” mechanisms (e.g. changes in water temperature) and natural population fluctuations. Based on recent studies, there seems to be fairly strong support for the top-down and bottom-up hypotheses. However, many potential drivers often co-occur and interact, especially in areas with high anthropogenic pressure, suggesting that multiple disturbances—by simultaneously reducing predation control, increasing urchin recruitment and reducing the resistance of seagrasses—could pave the way for overgrazing. In management, the most common response to overgrazing has been to remove urchins, but limited knowledge of direct and indirect effects makes it difficult to assess the applicability and sustainability of this method. Based on the wide knowledge gaps, which severely limits management, we suggest that future research should focus on (1) identification and quantification of ecosystem and societal scale effects of overgrazing; (2) assessment of the relative importance and interactions of different drivers; and (3) development of a holistic proactive and reactive long-term management agenda.     

Faulting, mass-wasting and deposition in an active dextral shear zone, the Gulf of Saros and the NE Aegean Sea, NW Turkey

Structural, mass-wasting and sedimentation processes along an active dextral shear zone beneath the Gulf of Saros and the NE Aegean Sea were investigated on the basis of new high-resolution swath bathymetric data and multi-channel seismics. A long history of dextral shearing operating since the Pliocene culminated in the formation of a NE-SW-trending, ca. 800-m-deep basin (the so-called inner basin) in this region, which is bordered by a broad shelf along its northern and eastern sides and a narrow shelf at the southern side. The western extension of the North Anatolian Fault Zone (the Ganos Fault) cuts the eastern shelf along a narrow deformation zone, and ends sharply at the toe of the slope, where the strain is taken up by two NE-SW-oriented fault zones. These two fault zones cut the basin floor along its central axis and generate a new, Riedel-type pull-apart basin (the so-called inner depression). According to the bathymetric and seismic data, these basin boundary fault zones are very recent features. The northern boundary of the inner depression is a through-going fault comprising several NE-SW- and E-W-oriented, overlapping fault segments. The southern boundary fault zone, on the other hand, consists of spectacular en-echelon fault systems aligned in NE–SW and WNW–ESE directions. These en-echelon faults accommodate both dextral and vertical motions, thereby generating block rotations along their horizontal axis. As the basin margins retreat, the basin widens continuously by mass-wasting of the slopes of the inner basin. The mass-wasting, triggered by active tectonics, occurs by intense landsliding and channel erosion. The eroded material is transported into the deep basin, where it is deposited in a series of deep-sea fans and slumps. The high sedimentation rate is reflected in an over 1,500-m-thick basin fill which has accumulated in Pliocene–Quaternary times.     

Factors controlling the morphological evolution of the Çanakkale Strait (Dardanelles, Turkey)

Seismic profiling, bathymetric and physical oceanographic data collected from the Çanakkale Strait revealed that the morphological evolution of the strait has been controlled by tectonic activity, and sediment erosion and deposition. Sediments in the strait have been sourced mostly by rivers draining the Biga Peninsula during lowstand periods. In highstand periods, by contrast, deposits in the strait were reworked by currents. The seafloor morphology of the Çanakkale Strait is also controlled by a sequence of factors ranging from tectonics to current erosion and deposition. Channel deposits overlying the basement are being eroded at the narrower, meandering central section of the strait (the Nara Passage) due to high current velocities. The eroded sediments are deposited in the relatively linear and wider, northern and southern sectors of the strait exposed to low current velocities. As a result, the high-energy areas are more deeply incised due to the erosion, whereas deposition elevates the seafloor in the areas exposed to lower current energy. Three strike-slip faults, which possibly relate to the activity of the North Anatolian Fault Zone, are responsible for the irregular shape of the strait and this, in turn, controls the current velocity along the strait. The high-energy conditions probably commenced with the latest invasion of Mediterranean waters some 12 ka b.p., and have continued as a two-layered current system to the present day.     

Palaeo- and rock-magnetic investigations across Jurassic-Cretaceous boundary at St Bertrand’s Spring,Drôme,France: applications to magnetostratigraphy

Palaeo- and rock-magnetic investigations of the St Bertrand’s Spring (Le Ravin de Font de St Bertrand) locality in France were carried out in order to contribute to, and improve, the stratigraphy of the Jurassic-Cretaceous boundary interval. Magnetic susceptibility shows slightly diamagnetic behaviour in the lowermost part of the profile and an increase (paramagnetic) towards its middle and upper parts. Rock-magnetic measurements throughout the section show magnetite as the main magnetic fraction, together with traces of hematite. Additionally, thermal demagnetization indicates the presence of goethite. Our magnetostratigraphy indicates three normal/reversed polarity sequences; possibly encompassing the magnetozones M19r to the M17n. This suggests that the St Bertrand section straddles the Tithonian/Berriasian boundary and reaches the middle Berriasian sensu lato.     

Increasing numerical efficiency of iterative solution for total least-squares in datum transformations

Cartesian coordinate transformation between two erroneous coordinate systems is considered within the Errors-In-Variables (EIV) model. The adjustment of this model is usually called the total Least-Squares (LS). There are many iterative algorithms given in geodetic literature for this adjustment. They give equivalent results for the same example and for the same user-defined convergence error tolerance. However, their convergence speed and stability are affected adversely if the coefficient matrix of the normal equations in the iterative solution is ill-conditioned. The well-known numerical techniques, such as regularization, shifting-scaling of the variables in the model, etc., for fixing this problem are not applied easily to the complicated equations of these algorithms. The EIV model for coordinate transformations can be considered as the nonlinear Gauss-Helmert (GH) model. The (weighted) standard LS adjustment of the iteratively linearized GH model yields the (weighted) total LS solution. It is uncomplicated to use the above-mentioned numerical techniques in this LS adjustment procedure. In this contribution, it is shown how properly diminished coordinate systems can be used in the iterative solution of this adjustment. Although its equations are mainly studied herein for 3D similarity transformation with differential rotations, they can be derived for other kinds of coordinate transformations as shown in the study. The convergence properties of the algorithms established based on the LS adjustment of the GH model are studied considering numerical examples. These examples show that using the diminished coordinates for both systems increases the numerical efficiency of the iterative solution for total LS in geodetic datum transformation: the corresponding algorithm working with the diminished coordinates converges much faster with an error of at least 10^-5 times smaller than the one working with the original coordinates.     

Numerical model and dynamic analysis of multi degree of freedom masonry arches

A new model is presented for planar multi-block arches subjected to earthquakes. The blocks are assumed to be rigid, and every interface between the blocks may split open and may close, ie, the blocks may impact to each other. During impact, both the classical Housner's approach and improved models with lower energy dissipation are considered. The arch model is verified by comparisons with the available results in the literature. Using the new model, it was found that the circular arch moves as a four-hinge mechanism typically only at the beginning of excitation, and several cracks split open during motion; furthermore, that modeling a multi-block arch by a single degree of freedom (SDOF) four-hinge mechanism may significantly overestimate its collapse load. While, in accordance with the literature, the overturning curves of single blocks and arches with symmetrically located four hinges are similar; for multi-block arches where several hinges may occur they can be very different.