Long-term recovery of a Louisiana brackish marsh plant community from oil-spill impact: vegetation response and mitigating effects of marsh surface elevation

Oil spills can have significant, short-term, negative impacts on coastal marshes, but the long-term effects and eventual recovery are not well documented, particularly in brackish marshes. The goals of this investigation were to: (1) document the long-term recovery of a Louisiana brackish marsh plant community impacted by a 1985 oil spill; (2) separate the effect of the oil spill on marsh deterioration from ambient rates of marsh deterioration; and (3) assess the relative importance of residual oil in the sediment and decreased marsh surface elevation in the failure of certain areas to recover. A total of 68 permanent plots previously established in 1985 were re-surveyed for plant and soil recovery in the fall of 1989. Although substantial (and near total) vegetative recovery was evident by significant increases in live and total vegetative cover, many of the plots that were initially heavily impacted by oil still displayed elevated levels of total saturated hydrocarbons in the soil. August 1990 measurements of plant photosynthetic response and edaphic variables revealed no significant differences between control plots and plots heavily impacted by oil that displayed vegetative regrowth. Rates of wetland land loss in the oiled marsh during an 8-year period that bracketed the time of the spill were within the historical range measured for this site and similar to the land loss rates of adjacent reference marshes. Results from a manipulative field transplant experiment indicated that the long-term failure of certain small areas to revegetate was primarily due to a decrease of marsh surface elevation (increased flooding stress), not a residual oil effect.     

Etiologies, observations and reporting of estuarine finfish lesions.

Lesions in estuarine finfish are associated with a variety of organisms including parasites and bacterial, viral, and fungal infectious agents. In addition, trauma, suboptimal water quality, and other abiotic stress factors may result in the loss of homeostasis. We have observed solitary ulcerative lesions on menhaden sampled from the Chesapeake Bay, Maryland, the Pimlico River, North Carolina, and the St. Johns River, Florida. Histologically, the lesions demonstrated a marked chronic inflammatory infiltrate and granulomas in response to fungal hyphae throughout large areas of exposed necrotic muscle. Gram-negative rod-shaped bacteria were also observed in the lesions, a common finding in ulcers of aquatic organisms. Similar observations in menhaden and other species have been described previously in the literature as ulcerative mycosis, mycotic granulomatosis, red spot disease, and epizootic ulcerative syndrome. Despite the many different known causes of fish lesions, the popular press and the scientific literature have recently emphasized Pfiesteria piscicida and other Pfiesteria-like dinoflagellates (and their bioactive compounds) as the primary causative agent for finfish lesions, particularly mycotic granulomatous ulcers in Atlantic menhaden. While some laboratory data suggest that Pfiesteria may play a role in field-observed lesions, much more cause-and-effect evidence is needed to determine the importance of other risk factors, both alone or and in combination with Pfiesteria. In order to better understand the etiology of lesion initiation and progression in estuarine finfish, accurate assessments of environmental conditions collected on appropriate temporal and spatial scales, and fish morphological indicators consistent with gross and histological pathologic terminology, should be used for reporting fish lesion observations and kills. Further, this outlook will help to avoid bias and may foster a broader perspective for examining the health of estuarine systems in general.     

Video cathodoluminescence microscopy of diagenetic cements and its applications

Diagenetic studies of sedimentary rocks using cold cathodoluminescence (CL) microscopy have been severely limited because of the very low intensity of visible luminescent emissions, which required long photographic exposure times, and because of the difficulty in obtaining quantitative data from CL observations. The solution to this problem is to fit the microscope with a high-sensitivity digital colour video camera linked to a computer with image enhancement and image analysis software. The new technique described in this paper:

• produces digital CL images of consistent high quality, both quickly and cheaply;

• controls the capture and editing of CL images, to reveal detailed textural information even from minerals exhibiting low level luminescence such as quartz;

• acquires quantitative information on pore systems and the abundance of cement zones from CL images.

Examples are presented to demonstrate the high quality of images produced in this way and the range of uses to which the new technique can be applied. The ability to image exactly the same field of view in both plane polarised light and CL is a particular advantage. Image analysis techniques have been developed to give a statistical characterisation of both pore systems and cement phases that infill them. The abundance of contrasting cement zones seen in CL can be measured and the abundance of cement phases can be mapped across a reservoir. The history of porosity occlusion can be reconstructed quantitatively and integrated with burial history and hydrocarbon migration. Porosity can be measured accurately and, since the technique obtains data on pore geometry as well as abundance, the pore system can be characterised by pore size distributions and pseudo-capillary pressure curves. This also opens the possibility of estimating permeability from thin sections.     

Trace metal composition of colloidal organic material in marine environments

Marine colloidal material (1 kDa–0.2 μm) was isolated by cross-flow ultrafiltration followed by diafiltration and freeze-drying from surface waters of the Gulf of Mexico and the Middle Atlantic Bight (MAB), as well as from estuarine waters of Galveston Bay. Elemental characterization of isolated colloidal material included organic carbon (OC) and selected trace metal (Cu, Pb, Zn, Cd, Co, Ni, Cr, Be, Fe, Al, Mn, V, Ba, and Ti) determinations. It was found that levels of these metals in marine colloids ranged from <0.1 to 50 μg/g colloidal matter, except for Fe which generally had a concentration >120 μg/g. Most metals (Cu, Pb, Zn, Ni, Al, Mn, V, and Ti) had an average concentration >1 μg/g while concentrations of Cd, Co and Be were usually <1 μg/g. Metal concentrations (μg/g) in isolated colloids were, in general, higher in Galveston Bay than in the Gulf of Mexico, suggesting either high abundance of trace metals in estuarine waters or differences in organic matter composition. Higher colloidal metal concentrations in the MAB than in the Gulf of Mexico might be due to higher terrestrial inputs in the MAB. Colloidal metal concentrations (μg/g) were generally lower than those in average soils, continental crust and suspended particles. However, metal/aluminum ratios (Me/Al) in isolated marine colloids were significantly higher than those for average soils and continental crust. Most importantly, colloids had a metal composition and metal/OC ratio (Me/C) similar to humic substances and marine plankton, suggesting that marine colloids largely originate from planktonic sources and are composed of predominately organic components. The Me/C ratios of Galveston Bay colloids followed the sequence of Cu>Ni, Cr, Zn>Mn>Co>Pb, Cd, which is similar to the Irving–Williams order except for Mn, suggesting that the interaction of metals with marine colloids is determined by the affinity of metals for specific organic ligands.     

An inventory of factors that affect polysaccharide production by Phaeocystis globosa

Phaeocystis material contains polysaccharides that are built from at least eight different monosaccharides. Differences have been reported between the carbohydrate composition of different Phaeocystis species, and also between samples taken from Phaeocystis globosa blooms in different areas. In order to elucidate factors that could play a role in determining variation in carbohydrate composition and production, a number of Phaeocystis globosa strains were studied under laboratory conditions. Although there was a clear distinction of a northern and a southern cluster in the Phaeocystis globosa strains based on RAPD analysis, the differences in the composition of the mucopolysaccharides were relatively small. The contribution of glucose, however, ranged from 7–85% of total sugars. A strain that was cultured in seawaters of diverse origin produced polysaccharides of a different composition, suggesting the effect of environmental factors. The presence of bacteria affected neither the amount, nor the composition of the carbohydrates that were produced by Phaeocystis globosa. Glucose is part of both the intracellular polysaccharide pool and of the mucopolysaccharides in the colony matrix. Using specific digestion of the intracellular chrysolaminaran by laminarinase, the distribution of polysaccharides over different pools could be assessed. During growth of an axenic, mucus-producing strain, the portion of glucose present as chrysolaminaran appeared to increase. The polyglucose that was not digested by laminarinase remains unidentified. This study shows that environmental factors rather than strain differences determine differences in the sugar composition of Phaeocystis globosa, especially with respect to the glucose content of the material. A difference in the contribution of glucose could be correlated to the portion of cells in the culture that are not in the colonies. Our study emphasises that for studying polysaccharide dynamics in Phaeocystis globosa it is important to be able to discriminate between the different polysaccharide pools. Preliminary results of an enzymatic approach were promising     

Holocene sedimentation of a wave-dominated barrierisland shoreline: Cape Lookout, North Carolina

The sedimentary record of 130 km of microtidal (0.9 m tidal range) high wave energy (1.5 m average wave height) barrier island shoreline of the Cape Lookout cuspate foreland has been evaluated through examination of 3136 m of subsurface samples from closely spaced drill holes. Holocene sedimentation and coastal evolution has been a function of five major depositional processes: (1) eustatic sea-level rise and barrier-shoreline transgression; (2) lateral tidal inlet migration and reworking of barrier island deposits; (3) shoreface sedimentation and local barrier progradation; (4) storm washover deposition with infilling of shallow lagoons; and (5) flood-tidal delta sedimentation in back-barrier environments.

Twenty-five radiocarbon dates of subsurface peat and shell material from the Cape Lookout area are the basis for a late Holocene sea-level curve. From 9000 to 4000 B.P. eustatic sea level rose rapidly, resulting in landward migration of both barrier limbs of the cuspate foreland. A decline in the rate of sea-level rise since 4000 B.P. resulted in relative shoreline stabilization and deposition of contrasting coastal sedimentary sequences. The higher energy, storm-dominated northeast barrier limb (Core and Portsmouth Banks) has migrated landward producing a transgressive sequence of coarse-grained, horizontally bedded washover sands overlying burrowed to laminated back-barrier and lagoonal silty sands. Locally, ephemeral tidal inlets have reworked the transgressive barrier sequence depositing fining-upward spit platform and channel-fill sequences of cross-bedded, pebble gravel to fine sand and shell. Shoreface sedimentation along a portion of the lower energy, northwest barrier limb (Bogue Banks) has resulted in shoreline progradation and deposition of a coarsening-up sequence of burrowed to cross-bedded and laminated, fine-grained shoreface and foreshore sands. In contrast, the adjacent barrier island (Shackleford Banks) consists almost totally of inlet-fill sediments deposited by lateral tidal inlet migration. Holocene sediments in the shallow lagoons behind the barriers are 5–8 m thick fining-up sequences of interbedded burrowed, rooted and laminated flood-tidal delta, salt marsh, and washover sands, silts and clays.

While barrier island sequences are generally 10 m in thickness, inlet-fill sequences may be as much as 25 m thick and comprise an average of 35% of the Holocene sedimentary deposits. Tidal inlet-fill, back-barrier (including flood-tidal delta) and shoreface deposits are the most highly preservable facies in the wave-dominated barrier-shoreline setting. In the Cape Lookout cuspate foreland, these three facies account for over 80% of the sedimentary deposits preserved beneath the barriers. Foreshore, spit platform and overwash facies account for the remaining 20%.     

Variability in concentration of suspensates in an estuarine environment

Three data sets of suspensate concentrations, collected under different sampling plans, were analyzed to develop a minimal sampling period, consistent with a predetermined precision. Individual samples collected during any part of a given day were within ±50% of the daily average. In the main channel of the estuary, a monthly sampling scheme closely approximated a weekly pattern; however, seasonal sampling was unsatisfactory. Outside the main channel, weekly, monthly, and seasonal sampling patterns did not differ greatly. Variability in suspensate concentrations must be considered when calculating sediment flux in estuarine and coastal waters.     

Tectonics at the intersection of the East Pacific Rise with Tamayo Transform fault

During the Fall of 1979, a manned submersible program, utilizing DSRV ALVIN, was carried out at the intersection of the East Pacific Rise (EPR) with the Tamayo Transform boundary. A total of seven dives were completed in the vicinity of the EPR/Tamayo intersection depression and documented the geologic relationships that characterize the juxtaposition of these types of plate boundaries. The young volcanic terrain of the EPR axis can be traced into and across the Tamayo Transform valley but becomes buried by sedimentary talus that is being shed from sediment scarps along the unstable sediment slope that defines the north side of the intersection depression. Within 4 km of the transform boundary, the dominant trend (000°) of the fissures and faults that disrupt the rise-generated volcanics is markedly oblique to the regional direction of sea floor spreading (120°). Since no evidence was found to suggest that these structures accommodate significant amounts of strike-slip displacement, they are taken to reflect a distortion of the EPR extensional tectonic regime by a transform generated shear couple. The floor of the Tamayo Transform valley in this area is inundated by mass-wasted sediment, and the principal transform displacement zone is characterized at the surface by a narrow (<1.5 km) interval of fault scarps in sediment that trends parallel with the transform valley. Extrapolated to the west, this zone links with zones of transform deformation investigated during earlier submersible studies (CYAMEX and Pastouret, 1981). Evidence of low-level hydrothermal discharge was seen at one locality on the EPR axis and at another 8 km west of the axis at the edge of the zone of transform deformation.     

Semisubmersible response to transient ice forces

The paper presents an analytical and experimental study on the transient response of semisubmersibles to bergybit impact and the strength of bergybit ice to high strain-rate loadings. Two approaches have been proposed for the solution of the semisubmersible-bergybit interaction problem, one using the energy approach and the other using the conventional structural dynamics approach with initial velocity conditions. In addition the local behaviour of the impacted regions have been analysed for deformation and failure. Numerical results have been given for local behaviour of an impacted column and global behaviour of semisubmersible-bergybit system. Experimental study has been reported on the impact strength of iceberg ice at strain rates of 10⁻³, 10⁻² and 10⁻¹; the indentation impact strength of ice is found to be 3–4 times the unaixial compressive strength, at the same strain rate.