Pairs of pulsars (PSR) and the origin of PSR

The results of research on pairs of PSR which were possibly components of disrupted binaries, seem to advance further arguments in favour of the idea, suggested by some authors, that most of PSR were formed in binary systems.     

Laser-Triangulation Optical-Correlation Sensor for ROV Slow Motion Estimation

A laser-triangulation optical-correlation sensor for estimating the motion of underwater vehicles at low speed in the proximity of the seabed is described. Experimental results, obtained by processing image sequences acquired by the instrument mounted below the Romeo remotely operated vehicle (ROV) in operating conditions, are presented     

Wavelength predictions for the 1s2 2p - 1s2p3p satellite transitions

The energy differences between 1s ²2p 1s2p3p transitions and the corresponding 1s ² 1s3p resonances are expressed by means of a polynomial function of the atomic number. The agreement with experimental data from lithium to potassium is very good. Interpolated values for nitrogen to sodium and argon as well as extrapolation for calcium are reported.     

Dispersion of a Passive Scalar Fluctuating Plume in a Turbulent Boundary Layer. Part III: Stochastic Modelling

We analyze the reliability of the Lagrangian stochastic micromixing method in predicting higher-order statistics of the passive scalar concentration induced by an elevated source (of varying diameter) placed in a turbulent boundary layer. To that purpose we analyze two different modelling approaches by testing their results against the wind-tunnel measurements discussed in Part I (Nironi et al., Boundary-Layer Meteorology, 2015, Vol. 156, 415–446). The first is a probability density function (PDF) micromixing model that simulates the effects of the molecular diffusivity on the concentration fluctuations by taking into account the background particles. The second is a new model, named VP\(\varGamma \), conceived in order to minimize the computational costs. This is based on the volumetric particle approach providing estimates of the first two concentration moments with no need for the simulation of the background particles. In this second approach, higher-order moments are computed based on the estimates of these two moments and under the assumption that the concentration PDF is a Gamma distribution. The comparisons concern the spatial distribution of the first four moments of the concentration and the evolution of the PDF along the plume centreline. The novelty of this work is twofold: (i) we perform a systematic comparison of the results of micro-mixing Lagrangian models against experiments providing profiles of the first four moments of the concentration within an inhomogeneous and anisotropic turbulent flow, and (ii) we show the reliability of the VP\(\varGamma \) model as an operational tool for the prediction of the PDF of the concentration.     

Estimating sand concentrations using ADCP-based acoustic inversion in a large fluvial system characterized by bi-modal suspended-sediment distributions

Quantifying sediment flux within rivers is a challenge for many disciplines due, mainly, to difficulties inherent to traditional sediment sampling methods. These methods are operationally complex, high cost, and high risk. Additionally, the resulting data provide a low spatial and temporal resolution estimate of the total sediment flux, which has impeded advances in the understanding of the hydro-geomorphic characteristics of rivers. Acoustic technologies have been recognized as a leading tool for increasing the resolution of sediment data by relating their echo intensity level measurements to suspended sediment. Further effort is required to robustly test and develop these techniques across a wide range of conditions found in natural river systems. This article aims to evaluate the application of acoustic inversion techniques using commercially available, down-looking acoustic Doppler current profilers (ADCPs) in quantifying suspended sediment in a large sand bed river with varying bi-modal particle size distributions, wash load and suspended-sand ratios, and water stages. To achieve this objective, suspended sediment was physically sampled along the Paraná River, Argentina, under various hydro-sedimentological regimes. Two ADCPs emitting different sound frequencies were used to simultaneously profile echo intensity level within the water column. Using the sonar equation, calibrations were determined between suspended-sand concentrations and acoustic backscatter to solve the inverse problem. The study also analyzed the roles played by each term of the sonar equation, such as ADCP frequency, power supply, instrument constants, and particle size distributions typically found in sand bed rivers, on sediment attenuation and backscatter. Calibrations were successfully developed between corrected backscatter and suspended-sand concentrations for all sites and ADCP frequencies, resulting in mean suspended-sand concentration estimates within about 40% of the mean sampled concentrations. Noise values, calculated using the sonar equation and sediment sample characteristics, were fairly constant across evaluations, suggesting that they could be applied to other sand bed rivers. © 2018 John Wiley & Sons, Ltd.     

A procedure to estimate the seismic hazard in an urban area: an application to Acireale (Eastern Sicily)

A “standard procedure” to characterize the seismic hazard of a given area was proposed. It is based on a multidisciplinary approach implying: (1) the knowledge of the seismic history of the area; (2) detailed geological surveys; (3)seismic noise measurements; (4) simulations of earthquake scenarios. The downtown of Acireale, a typical baroque town located on Eastern Sicily, was chosen as the “test area”. A catalog of the local seismogenic faults (able to generate earthquakes in historical times) has been compiled, as well as a seismic catalog for the effects of both local and regional earthquakes. The analysis of both catalogs allowed us to make the following conclusions: (1) the most important seismogenic faults affecting the Acireale municipality do not affect the downtown, while the related local earthquakes attenuate their energy (and intensity) in short (few km) distances; (2) the highest seismic intensity (degree X) experienced in Acireale downtown was caused by the 1693 regional earthquake; (3) over the last 140 years, the downtown has experienced the highest intensity value of VII only once, while six times the intensity was VI. On the whole, this implies a moderate seismic hazard. The estimation of the seismic hazard has been also approached by the experimental method of recording seismic noise. Measurements have been performed at seven different sites, where drills gave detailed information on the shallow subsurface geology to obtain HV (horizontal/vertical) spectral ratios. On the whole, the highest site amplification factor was moderate (about 7). A further investigation based on synthetic seismograms (and spectra) produced by simulating two given earthquake scenarios was also performed. The two scenarios are, respectively, representative of the largest expected earthquake in the area (the 1693 shock) and of a moderate (magnitude ca. 5.5) local earthquake (as the 1818 one). Moderate to strong locally expected accelerations were evidenced.     

Hydrogeological and thermal characterization of shallow aquifers in the plain sector of Piemonte region (NW Italy): implications for groundwater heat pumps diffusion

The low annual and seasonal variability of the shallow groundwater temperature in the alluvial plain aquifers of the Piemonte region (NW Italy) confirmed the potentiality of the low-enthalpy open-loop groundwater heat pumps (GWHP) diffusion to contribute to the reduction of regional greenhouse gas emissions. The distribution of mean groundwater temperatures ranged from a minimum of 10.3°C to a maximum of 17.9°C with a mean of 14.0°C. Differences among diverse areas were slight according with the modest variations in the general climatic condition. Like the air, temperature distribution of the shallow groundwater temperatures is generally similar to topographic elevations in reverse manner. Higher temperature values recorded were typical of summer months (June, July). On the opposite lower values were measured in January and February. No significant difference phase (time) difference between air and groundwater temperature appeared in the data analysis. Besides air-temperature influence (seasonal variability) seemed strictly connected to the depth to groundwater in the measure point and it was negligible when the value was over 9.5 m. For the application of the open-loop systems, extensive examinations of the hydrogeological local conditions should be conducted at site scale and groundwater heat transport modelling should be developed.     

Re–Os and Pb–Pb geochronology of the Archean Salobo iron oxide copper–gold deposit, Carajás mineral province, northern Brazil

Rhenium–osmium ages were determined for two molybdenite samples and a Pb–Pb age was derived from bornite–chalcopyrite–magnetite at the Salobo iron oxide copper–gold deposit to determine the timing of mineralization and its relation to the nearby Old Salobo Granite. Rhenium–osmium dating of molybdenite spatially associated with copper sulfide minerals yields ages with weighted means of 2576±8 and 2562±8 Ma. Removing the error multiplier introduced by the decay constant uncertainty, appropriate for comparing ages from the same isotopic system, these data convincingly argue for two temporally separated pulses of molybdenite deposition at 2576.1±1.4 Ma (n=2) and 2561.7±3.1 Ma (n=3). The 2576±8 Ma age coincides with a previously published U–Pb age of 2573±2 Ma for the Old Salobo Granite, suggesting that main stage ore formation may have been contemporaneous with granite magmatism. The slightly younger 2562 Ma age most likely represents new molybdenite precipitation associated with the development or reactivation of local shear zones. Lead–lead stepwise leaching of copper sulfide minerals yields a less precise isochron age of 2579±71 Ma, and supports an Archean age for the Salobo ores. This is the first documentation of an Archean iron oxide copper–gold deposit, and the Re–Os and Pb–Pb geochronology herein support 2580–2550 Ma estimates for basement reactivation and regional granite magmatism associated with the development of brittle–ductile shear zones.     

An improved method for delineating source protection zones for karst springs based on analysis of recession curve data

A standard method for delineating source protection zones, particularly for karst and carbonate springs, has been improved. The method, based on recession curve analysis, defines four vulnerability scenarios with an evaluation of the appropriate dimensions of the protection areas, accommodating situations where field-test data are not available. The new approach makes it easier to separate the components of the spring discharge hydrograph. The objective is to achieve simplification, and an effective, more rigorous, procedure in the determination of the parameters used by Mangin’s model—Mangin A (1975) Contribution a l’étude hydrodynamique des aquifères karstiques-Troisieme partie: Constitution et fonctionnement des aquifères karstiques (Contribution to the hydrodynamic study of karst aquifers, part 3: formation and work of karst aquifers). Ann Speleol 30(1):21–124. The original procedure, plus the lack of sufficient data, was open to subjective interpretation. With the aid of modern technology, a very large quantity of data is now available and it is necessary to process it using denoise type computer-based filters before passing to interpretation. Working with discharge data series, a statistical approach is proposed to give an analytical solution for determining the values of fundamental parameters of the recession curve model. The new procedure is defined and compared with the original methodology. The new approach has been tested and applied to a number of karst springs in Italy. A case history for a spring located in the Piedmont region of the Maritime Alps, is presented. The proposed new procedure can be utilised to mark the limits of the protection zones of tapped groundwater supplied for potable use, as required by European and local legislation.     

Trace element and Pb–B–Li isotope systematics of olivine-hosted melt inclusions: insights into source metasomatism beneath Stromboli (southern Italy)

We studied the elemental and isotopic (Pb, B and Li isotopes) composition of melt inclusions hosted in highly forsteritic (Fo_83–91) olivines that were collected from San Bartolo lava and pumice (ST79p, ST82p and ST531p) samples erupted by Stromboli in historical times. The studied melt inclusions have primitive calcalkaline to shoshonitic basaltic compositions. They cover a compositional range far wider than that exhibited by the whole-rocks and differ in key trace element ratios. San Bartolo melt inclusions are characterized by lower incompatible trace element abundances, higher ratios between fluid-mobile (B, Pb, U and LILE) and less fluid-mobile (REE, Th, HFSE) elements and lower La/Yb ratios relative to the pumice-hosted melt inclusions and pumiceous melts erupted during paroxysmal events. Trace elements, along with different Pb, B and Li isotopic signatures, attest to source heterogeneity on the small scale and provide new insights into subducted components beneath Stromboli. Results of a mixing model suggest that metasomatism of the mantle source of pumice-hosted melt inclusions was driven by solute-rich high-pressure fluids (<20%) expelled from the deep portion of the slab. Heterogeneous Pb isotopic composition together with light δ¹¹B (−8.6 to −13.7‰) and δ⁷Li (+2.3 to −1.7‰) indicates that high-pressure liquids were released in variable proportions from highly dehydrated metabasalts and metasediments. On the other hand, the elemental and isotopic (δ¹¹B ~ −1.9 to −5.9‰) composition of San Bartolo melt inclusions is better explained by the addition of a prevalent aqueous component (~2 to 4%) escaped at shallower depths from sediments and altered basaltic crust in almost equivalent proportions, with a smaller contribution by high-pressure fluids. Owing to the high-angle dip of the subducted cold Ionian slab, aqueous fluids and high-pressure fluids would rise through the mantle wedge and locally superimpose on each other, thus giving origin to variously metasomatized mantle domains.