Microwave response of seasonal snow-cover measured by using a ground-based radiometer at 6.93 and 18.7 ghz frequencies and at dual polarization

Snow cover is an important variable for climatic and hydrologic models due to its effects on surface albedo, energy, and moisture budgets. Passive microwave sensors can be used to monitor temporal and spatial variations in large-scale snow cover parameters, avoiding problems of cloud cover and polar nights. In the present study, brightness temperature values were estimated (using calibration curves) for moist snow on natural and blackbody/metal surface. T_B response on snow depth, density, SWE and angular variation from nadir were measured and found that T_B decreases with increase of snow depth and with increase of angle from nadir. Empirical relations were used to estimate emissivity, dielectric constant and dielectric loss factor. It was observed that emissivity decreases with the increase of dielectric constant. The dielectric constant and dielectric loss factor both increases with the increase of density. Experiments were performed during winter of year 2005 at Dhundi and Solang (H.P.), India, using ground based passive microwave radiometer having 6.9 and 18.7 GHz antenna frequencies at dual polarization.     

A Keystone Transform Without Interpolation for SAR Ground Moving-Target Imaging

Synthetic aperture radar (SAR) image formation for a ground moving target necessitates the compensation of the unknown target trajectory. The keystone transform has been employed to remove the linear component of the range migration for the moving target, where interpolation is required. In this letter, a realization of the keystone transform avoiding interpolation is presented. The kernel of this transform, i.e., the range-frequency-dependent azimuth time rescaling, is implemented using only complex multiplications and fast Fourier transforms based on the scaling principle, which has been successfully applied in the equalization of the space-variant range cell migration in SAR processing. In addition, the moving target is coarsely focused according to the SAR geometry and the platform velocity while exploiting the scaling principle. This preliminary focusing is helpful in the isolation of the moving target from ground clutter, so as to facilitate a more refined processing with respect to each mover. SAR raw data combined with simulated echoes of moving targets are utilized to validate the presented approach     

Spatial Technologies in Deriving the Morphotectonic Characteristics of Tectonically Active Western Tripura Region,Northeast India

Employing integrated remote sensing and GIS technology the western most part of Tripura region (Northeast India) and adjoining Bangladesh region has been investigated in the light of its geomorphological characteristics. Nature of fold ridges, several streams and the respective drainage basins are well depicted in satellite images and digital elevation model providing meaningful information. Quantitative parameters such as stream sinuosity, drainage basin asymmetry, basin elongation ratio have been computed. Main rivers of the study area, namely the Gomti and Khowai follows extremely meandering path and crosses through the transversely faulted anticlinal ridges. Fluvial anomalies viz. shift in stream channel and the abandoned meandering loops have been inferred and mapped. The Haora river in the study area exhibits northward shift in some part. Development of drainage system towards north and south from the drainage divide along the latitude 23°45^′N indicated up arching of the region which is also corroborated by the extracted topographic profiles. It has been observed that several tributary streams have gone dry and agricultural fields are developed along the dried up stream. These derived parameters remained useful to understand the nature of topographical modification attributed to the possible tectonic activity.     

Comparison of Two Data Smoothing Techniques for Vegetation Spectra Derived From EO-1 Hyperion

Hyperspectral data are generally noisier compared to broadband multispectral data because their narrow bandwidth can only capture very little energy that may be overcome by the self-generated noise inside the sensors. It is desirable to smoothen the reflectance spectra. This study was carried out to see the effect of smoothing algorithms - Fast-Fourier Transform (FFT) and Savitzky–Golay (SG) methods on the statistical properties of the vegetation spectra at varying filter sizes. The data used in the study is the reflectance spectra data obtained from Hyperion sensor over an agriculturally dominated area in Modipuram (Uttar Pradesh). The reflectance spectra were extracted for wheat crop at different growth stages. Filter sizes were varied between 3 and 15 with the increment of 2. Paired t-test was carried out between the original and the smoothed data for all the filter sizes in order to see the extent of distortion with changing filter sizes. The study showed that in FFT, beyond filter size 11, the number of locations within the spectra where the smooth spectra were statistically different from its original counterpart increased to 14 and reaches 21 at the filter size 15. However, in SG method, number of statistically different locations were more than those found in the FFT, but the number of locations did not changing drastically. The number of statistically disturbed locations in SG method varied between 16 and 19. The optimum filter size for smoothing the vegetation spectra was found to be 11 in FFT and 9 in SG method.     

Measuring tree stem diameters using intensity profiles from ground-based scanning lidar from a fixed viewpoint

This paper presents a method for using the intensity of returns from a scanning light detection and ranging (lidar) system from a single viewing point to identify the location and measure the diameter of tree stems within a forest. Such instruments are being used for rapid forest inventory and to provide consistent supporting information for airborne lidars. The intensity transect across a tree stem is found to be consistent with a simple model parameterised by the range and diameter of the trunk. The stem diameter is calculated by fitting the model to transect data. The angular span of the stem can also be estimated by using a simple threshold where intensity values are tested against the expected intensity for a stem of given diameter. This is useful when data are insufficient to fit the model or the stem is partially obscured. The process of identifying tree positions and trunk diameters is fully automated and is shown to be successful in identifying a high proportion of trees, including some that are partially obscured from view. The range and bearing to trees are in excellent agreement with field data. Trunk angular span and diameter estimations are well correlated with field measurements at the plot scale. The accuracy of diameter estimation is found to decrease with range from the scanning position and is also reduced for stems subtending small angles (less than twice the scanning resolution) to the instrument. A method for adjusting survey results to compensate for trees missed due to obscuration from the scanning point and the use of angle count methods is found to improve basal area estimates and achieve agreement within 4% of field measurements.     

VLBI-derived troposphere parameters during CONT08

Time-series of zenith wet and total troposphere delays as well as north and east gradients are compared, and zenith total delays (ZTD) are combined on the level of parameter estimates. Input data sets are provided by ten Analysis Centers (ACs) of the International VLBI Service for Geodesy and Astrometry (IVS) for the CONT08 campaign (12?C26 August 2008). The inconsistent usage of meteorological data and models, such as mapping functions, causes systematics among the ACs, and differing parameterizations and constraints add noise to the troposphere parameter estimates. The empirical standard deviation of ZTD among the ACs with regard to an unweighted mean is 4.6?mm. The ratio of the analysis noise to the observation noise assessed by the operator/software impact (OSI) model is about 2.5. These and other effects have to be accounted for to improve the intra-technique combination of VLBI-derived troposphere parameters. While the largest systematics caused by inconsistent usage of meteorological data can be avoided and the application of different mapping functions can be considered by applying empirical corrections, the noise has to be modeled in the stochastic model of intra-technique combination. The application of different stochastic models shows no significant effects on the combined parameters but results in different mean formal errors: the mean formal errors of the combined ZTD are 2.3?mm (unweighted), 4.4?mm (diagonal), 8.6?mm [variance component (VC) estimation], and 8.6?mm (operator/software impact, OSI). On the one hand, the OSI model, i.e. the inclusion of off-diagonal elements in the cofactor-matrix, considers the reapplication of observations yielding a factor of about two for mean formal errors as compared to the diagonal approach. On the other hand, the combination based on VC estimation shows large differences among the VCs and exhibits a comparable scaling of formal errors. Thus, for the combination of troposphere parameters a combination of the two extensions of the stochastic model is recommended.     

Edge effects on tree height retrieval using X-band interferometry

This letter investigates the edge effects on the tree height retrieval over coniferous plantations using X-band interferometry. A coherent version of the water cloud model is used to evaluate the influence of observation conditions such as incidence angle, tree height, and slope, each of which affects the extent of areas affected by edge effects. Results from the model simulation are discussed in the context of actual X-band data over pine plantations. A generic expression to indicate the extent of edge effects is described.     

The Global Impact of Clouds on the Production of MODIS Bidirectional Reflectance Model-Based Composites for Terrestrial Monitoring

A global data set of cloud occurrence probability derived from Moderate Resolution Imaging Spectroradiometer (MODIS) Terra and Aqua gridded daily data is analyzed to investigate the probability of obtaining at least a minimum number of cloud-free observations within various compositing periods. The probabilities derived from Terra and Aqua, with morning and afternoon overpass times, respectively, are similar and increase with compositing period. Compositing both Terra and Aqua observations results in considerably higher probabilities of obtaining a sufficient number of observations for bidirectional reflectance model-based compositing. Given that the only alternative to obtaining sufficient samples is to extend the observation period, which can cause significant problems when the surface state changes, it is concluded that using data from the two MODIS sensors provides the most effective way of generating composited products. Findings with respect to the availability of cloud-free composites when n-day composites are generated on a temporally overlapping daily rolling basis, i.e., every day, rather than every n-days, are also discussed for regional and global applications     

Angular resolution of terrestrial laser scanners

Knowledge of a laser scanner's spatial resolution is necessary in order to prevent aliasing and estimate the level of detail that can be resolved from a scanned point cloud. Spatial resolution can be decoupled into range and angular components. The latter is the focus of this paper and is governed primarily by sampling interval and laser beamwidth. However, emphasis is often placed on one of these—typically sampling interval—as an indicator of resolution. Since both affect the resolution of a scanned point cloud, consideration of only one factor independent of the other can lead to a misunderstanding of a system's capabilities. This will be demonstrated to be inappropriate except under very specific conditions. A new, more appropriate resolution measure for laser scanners, the effective instantaneous field of view (EIFOV), is proposed. It is derived by modelling the shift variance of the equal angular increment sampling process, laser beamwidth-induced positional uncertainty and observed angle quantisation with ensemble average modulation transfer functions (AMTFs). Several commercially available terrestrial laser scanner systems are modelled and analysed in terms of their angular resolution capabilities using the EIFOV.     

Chinese Surveying and Control Network for Earth-Orbit Satellites and Deep Space Detection

Introduction Astorealizetheprojectofspatialgeodesyby geodeticsatellites,itisnecessarytoestablisha satellitecontrollingandsurveyingnetwork(SC SN)totrack,tosurvey,toremotelycontroland tocommunicatewithearth orbitsatellite,forre alizingtheprojectofdeepspaced…