Hydraulics and Hydrology in Mountain Areas

<正>The 35th IAHR World Congress was held in Chengdu,China from September 8 to September 132013.The title of the conference was:"The Wise Finds Pleasure in Water:Meandering through Water Science and Engineering".During the congress,1239 papers were presented in 139sessions for oral presentations and 7 sessions for poster presentations.After the Congress,a Committee was appointed to select some of the best papers presented at the Congress for publication,after a     

The Volumetric Particle Approach for Concentration Fluctuations and Chemical Reactions in Lagrangian Particle and Particle-grid Models

A new approach is proposed to predict concentration fluctuations in the framework of one-particle Lagrangian stochastic models. The approach is innovative since it allows the computation of concentration fluctuations in dispersing plumes using a Lagrangian one-particle model with micromixing but with no need for the simulating of background particles. The extension of the model for the treatment of chemically reactive plumes is also accomplished and allows the computation of plume-related chemical reactions in a Lagrangian one-particle framework separately from the background chemical reactions, accounting for the effect of concentration fluctuations on chemical reactions in a general, albeit approximate, manner. These characteristics should make the proposed approach an ideal tool for plume-in-grid calculations in chemistry transport models. The results are compared to the wind-tunnel experiments of Fackrell and Robins (J Fluid Mech, 117:1–26, 1982) for plume dispersion in a neutral boundary layer and to the measurements of Legg et al. (Boundary-Layer Meteorol, 35:277–302, 1986) for line source dispersion in and above a model canopy. Preliminary reacting plume simulations are also shown comparing the model with the experimental results of Brown and Bilger (J Fluid Mech, 312:373–407, 1996; Atmos Environ, 32:611–628, 1998) to demonstrate the feasibility of computing chemical reactions in the proposed framework.     

Amphibole and apatite insights into the evolution and mass balance of Cl and S in magmas associated with porphyry copper deposits

Chlorine and sulfur are of paramount importance for supporting the transport and deposition of ore metals at magmatic–hydrothermal systems such as the Coroccohuayco Fe–Cu–Au porphyry–skarn deposit, Peru. Here, we used recent partitioning models to determine the Cl and S concentration of the melts from the Coroccohuayco magmatic suite using apatite and amphibole chemical analyses. The pre-mineralization gabbrodiorite complex hosts S-poor apatite, while the syn- and post-ore dacitic porphyries host S-rich apatite. Our apatite data on the Coroccohuayco magmatic suite are consistent with an increasing oxygen fugacity (from the gabbrodiorite complex to the porphyries) causing the dominant sulfur species to shift from S^2? to S⁶⁺ at upper crustal pressure where the magmas were emplaced. We suggest that this change in sulfur speciation could have favored S degassing, rather than its sequestration in magmatic sulfides. Using available partitioning models for apatite from the porphyries, pre-degassing S melt concentration was 20–200 ppm. Estimates of absolute magmatic Cl concentrations using amphibole and apatite gave highly contrasting results. Cl melt concentrations obtained from apatite (0.60 wt% for the gabbrodiorite complex; 0.2–0.3 wt% for the porphyries) seems much more reasonable than those obtained from amphibole which are very low (0.37 wt% for the gabbrodiorite complex; 0.10 wt% for the porphyries). In turn, relative variations of the Cl melt concentrations obtained from amphibole during magma cooling are compatible with previous petrological constraints on the Coroccohuayco magmatic suite. This confirms that the gabbrodioritic magma was initially fluid undersaturated upon emplacement, and that magmatic fluid exsolution of the gabbrodiorite and the pluton rooting the porphyry stocks and dikes were emplaced and degassed at 100–200 MPa. Finally, mass balance constraints on S, Cu and Cl were used to estimate the minimum volume of magma required to form the Coroccohuayco deposit. These three estimates are remarkably consistent among each other (ca. 100 km³) and suggest that the Cl melt concentration is at least as critical as that of Cu and S to form an economic mineralization.     

Extraction and accuracy assessment of high-resolution DEM and derived orthoimages from ALOS-PRISM data over Sahel-Doukkala (Morocco)

In Sahel-Doukkala, which is characterized by lands of a relatively low relief, global DEMs and DEMs generated from digitizing topographic maps, have been the primary source of several multidisciplinary researches. Although these products present a great value of the conducted research, the level of the given accuracy is not sufficient enough for detailed geospatial analysis. These requirements led us to generate a high-resolution DEM as an alternative of available global DEMs or/and DEMs generated from digitizing topographic maps. In this study, we present a workflow to extract high-resolution DEM at 5 m resolution and derived orthoimages from ALOS-PRISM data over Sahel-Doukkala, through photogrammetric techniques, using a variation of GCPs obtained from topographic maps at scale 1:25,000. The accuracy of the generated products is reported according to NSSDA standards. Using ten GCPs, a PRISM-DEM with 3.88 m vertical accuracy and 11.60 m horizontal accuracy, both at 95% confidence level is obtained. This DEM will serve as base dataset for further detailed geospatial analysis and mapping applications in order to identify the relationship between surface parameters and groundwater, and also to assess and understand all factors influencing the development of karst landscapes and consequently subsurface stability in the investigated area.     

Structure of the vertical velocity field analyzed with a Doppler Sodar

Fifteen hours of Sodar echoes, collected during the 4th Environmental CEC Campaign at Turbigo, Italy, in September 1979, have been analyzed. We discuss the vertical profiles and the time evolution of the second and third statistical moments of the vertical component of wind velocity, measured at a rate of one height-profile every 6 s for a height range of 1000 m and a vertical resolution of 29 m. We also analyze the power spectra of the vertical velocity.     

Time to act now? Assessing the costs of delaying climate measures and benefits of early action

This paper compares the results of the three state of the art climate-energy-economy models IMACLIM-R, ReMIND-R, and WITCH to assess the costs of climate change mitigation in scenarios in which the implementation of a global climate agreement is delayed or major emitters decide to participate in the agreement at a later stage only. We find that for stabilizing atmospheric GHG concentrations at 450?ppm CO₂-only, postponing a global agreement to 2020 raises global mitigation costs by at least about half and a delay to 2030 renders ambitious climate targets infeasible to achieve. In the standard policy scenario??in which allocation of emission permits is aimed at equal per-capita levels in the year 2050??regions with above average emissions (such as the EU and the US alongside the rest of Annex-I countries) incur lower mitigation costs by taking early action, even if mitigation efforts in the rest of the world experience a delay. However, regions with low per-capita emissions which are net exporters of emission permits (such as India) can possibly benefit from higher future carbon prices resulting from a delay. We illustrate the economic mechanism behind these observations and analyze how (1) lock-in of carbon intensive infrastructure, (2) differences in global carbon prices, and (3) changes in reduction commitments resulting from delayed action influence mitigation costs.     

An Advanced Puff Model Based On A Mixed Eulerian/Lagrangian Approach For Turbulent Dispersion In The Convective Boundary Layer

An advanced model aimed at describing the problem of dispersion in theconvective boundary layer is proposed. The pollutant particles are groupedin clusters and modelled as Gaussian puffs. The expansion of each puff ismodelled according to the concept of relative dispersion and expressed interms of the spectral properties of the energy containing eddies of the turbulent field. The centre of mass of each puff is moved along a stochastic trajectory, obtained using a Lagrangian stochastic model and filtering the velocity with a recursive Kalman filter. At any instant, a filtering procedure, depending both on travel time and on puff size, acts to select spectral components involved in the expansion and in the meandering of the puff. Such an approach requires only a moderate number of puff releases, so that the proposed model is faster to run than a standard Lagrangian model. On the other hand, unlike the traditional puff model, it allows us to simulate both expansion and meandering of the puff. Therefore, it is well suited to simulate dispersion when the turbulent structures are larger thanthe plume dimensions, as for example in convective conditions. Being based onspectral formulations in both Eulerian and Lagrangian parts, the model is consistent in all the turbulent parameterizations utilised. Comparisons with a standard Lagrangian particle model as well as with a classical convective experimental dataset show good performance of the proposed model.     

Iron release in aqueous environment by fresh volcanic ash from Mount Etna (Italy) and Popocatépetl (Mexico) volcanoes

In this study, we performed leaching experiments for timescales of hours-to-months in deionized water on fresh volcanic ash from Mt. Etna (Italy) and Popocatépetl (Mexico) volcanos to monitor Fe release as a function of ash mineral chemistry and size, with the aim of clarifying Fe release mechanisms and eventually evaluating the impact of volcanic ash on marine and lacustrine environments. To define sample mineralogy and Fe speciation, inclusive characterization was obtained by means of XRF, SEM, XRPD, EELS and Mössbauer spectroscopies. For Etna and Popocatépetl samples, glass proportions were quantified at 73 and 40%, Fe₂O₃ total contents at 11.6–13.2 and 5.8 wt%, and Fe³⁺/Fe_Tot ratios at 0.33 and 0.23, respectively. Leaching experiments showed that significant amounts of iron, ~?30 to 150 and ~?750 nmol g^?1 l^?1 for pristine Etna and Popocatépetl samples, respectively, are released within the first 30 min as a function of decreasing particle size (from 1 to 0.125 mm). The Popocatépetl sample showed a very sustained Fe release (up to 10 times Etna samples) all along the first week, with lowest values never below 400 nmol g^?1 l^?1 and a maximum of 1672 nmol g^?1 l^?1 recorded after 5 days. This sample, being composed of very small particles (average particle size 0.125 mm) with large surface area, likely accumulated large quantities of Fe-bearing sublimates that quickly dissolved during leaching tests, determining high Fe release and local pH decrease (that contributed to release more Fe from the glass) at short timescale (hours-to-days). The fractional Fe solubility (Fe_S) was 0.004–0.011 and 0.23% for Etna and Popocatépetl samples, respectively, but no correlation was found between Fe released in solution and either ash Fe content, glass/mineral ratio or mineral assemblage. Results obtained suggest that volcanic ash chemistry, mineralogy and particle size assume a relevant role on Fe release mostly in the medium-to-long timescale, while Fe release in the short timescale is dominated by dissolution of surface sublimates (formed by physicochemical processes occurring within the eruption plume and volcanic cloud) and the effects of such a dissolution on the local pH conditions. For all samples, a moderate to sustained Fe release occurred for leaching times comparable with their residence time within the euphotic zone of marine and lacustrine environments (variable from few minutes to few hours), revealing their possible contribution to increase Fe bioavailability.     

New Constraints on Ages of Glasses Proposed as Reference Materials for Fission-Track Dating

New analyses have been performed in order to enhance the data-set on the independent ages of four glasses that have been proposed as reference materials for fission-track dating. The results are as follows. Moldavite - repeated ⁴⁰Ar/³⁹Ar age determinations on samples from deposits from Bohemia and Moravia yielded an average of 14.34 ± 0.08 Ma. This datum agrees with other recent determinations and is significantly younger than the ⁴⁰Ar/³⁹Ar age of 15.21 ± 0.15 Ma determined in the early 1980s. Macusanite (Peru) -four K-Ar ages ranging from 5.44 ± 0.06 to 5.72 ± 0.12 Ma have been published previously. New ⁴⁰Ar/³⁹Ar ages gave an average of 5.12 ± 0.04 Ma. Plateau fission-track ages determined using the IRMM-540 certified glass and U and Th thin films for neutron fluence measurements agree better with these new ⁴⁰Ar/³⁹Ar ages than the previously published ages. Roccastrada glass (Italy) - a new ⁴⁰Ar/³⁹Ar age, 2.45 ± 0.04 Ma, is consistent with previous determinations. The Quiron obsidian (Argentina) is a recently discovered glass that has been proposed as an additional reference material for its high spontaneous track density (around 100 000 cm^-2). Defects that might produce "spurious" tracks are virtually absent. An independent ⁴⁰Ar/³⁹Ar age of 8.77 ± 0.09 Ma was determined and is recommended for this glass. We believe that these materials, which will be distributed upon request to fission-track groups, will be very useful for testing system calibrations and experimental procedures.     

Petrogenesis of Quebrada de la Mina and Altar North porphyries (Cordillera of San Juan,Argentina): Crustal assimilation and metallogenic implications

We investigate the geology of Altar North (Cu–Au) and Quebrada de la Mina (Au) porphyry deposits located in San Juan Province (Argentina), close to the large Altar porphyry copper deposit (995 Mt, 0.35% Cu, 0.083 g/t Au), to present constraints on the magmatic processes that occurred in the parental magma chambers of these magmatic-hydrothermal systems. Altar North deposit comprises a plagioclase-amphibole-phyric dacite intrusion (Altar North barren porphyry) and a plagioclase-amphibole-biotite-phyric dacite stock (Altar North mineralized porphyry, 11.98 ± 0.19 Ma). In Quebrada de la Mina, a plagioclase-amphibole-biotite-quartz-phyric dacite stock (QDM porphyry, 11.91 ± 0.33 Ma) crops out. High Sr/Y ratios (92–142) and amphibole compositions of Altar North barren and QDM porphyries reflect high magmatic oxidation states (fO₂ = NNO +1.1 to +1.6) and high fH₂O conditions in their magmas. Zones and rims enriched in anorthite (An_37–48), SrO (0.22–0.33 wt.%) and FeO (0.21–0.37 wt.%) in plagioclase phenocrysts are evidences of magmatic recharge processes in the magma chambers. Altar North and Quebrada de la Mina intrusions have relatively homogeneous isotopic compositions (⁸⁷Sr/⁸⁶Sr_(t) = 0.70450–0.70466, ε_Nd(t) = +0.2 to +1.2) consistent with mixed mantle and crust contributions in their magmas. Higher Pb isotopes ratios (²⁰⁷Pb/²⁰⁴Pb = 15.6276–15.6294) of these intrusions compared to other porphyries of the district, reflect an increase in the assimilation of high radiogenic Pb components in the magmas. Ages of zircon xenocrysts (297, 210, 204, 69 Ma) revealed that the magmas have experienced assimilation of Miocene, Cretaceous, Triassic and Carboniferous crustal rocks.Fluids that precipitated sulfides in the Altar deposit may have remobilized Pb from the host rocks, as indicated by the ore minerals being more radiogenic (²⁰⁷Pb/²⁰⁴Pb = 15.6243–15.6269) than their host intrusions. Au/Cu ratio in Altar porphyries (average Au/Cu ratio of 0.14 × 10^?4 by weight in Altar Central) is higher than in the giant Miocene porphyry deposits located to the south: Los Pelambres, Río Blanco and Los Bronces (Chile) and Pachón (Argentina). We suggest that the increase in Au content in the porphyries of this region could be linked to the assimilation of high radiogenic Pb components in the magmas within these long-lived maturation systems.