Basinwide flood control system by combining prediction and reservoir operation

Japan has traditionally performed flood prevention through the construction and use of dikes, storage reservoirs, and basins which are costly and time consuming options. Another non-structural option is to operate the flood control system appropriately with a view to reducing flood damage. In this paper, a flood control system combining the runoff prediction model in the whole river basin with the reservoir operation is discussed. Different models of the runoff process are introduced in order to compare their accuracies and the computational time for the flood forecasting system. The reservoir operational rule is formulated in terms of fuzzy inference theory. Historical data are applied in a case study for verification of the proposed theories.     

Geochemistry of dissolved rare earth elements in the Equatorial Pacific Ocean

Seawater samples were collected from four locations in the Equatorial Pacific Ocean during the MR02-K06 cruise of the R/V Mirai and analyzed for dissolved rare earth elements (REEs) using inductively coupled plasma mass spectrometry. According to variations of REE concentrations and Yb/La ratios, the results show that the river input of the Papua New Guinea islands may affect the compositions of REEs in the Equatorial Pacific surface water. The Yb/La values and the REE concentrations in the waters deeper than 3,000 m in the western South Pacific and the Equatorial Pacific Oceans, which represent the characteristics of Antarctic Bottom Water (AABW), demonstrate similar variation trend with depth. This result also indicates that the REEs which originated from the South Pacific Ocean have entered the North Pacific Ocean across the equator with AABW intrusion.     

Microstructures of olivine-plagioclase corona in meta-ultramafic rocks from Sefuri Mountains, NW Kyushu, Japan

Two types of reaction rims occur between olivine and plagioclase in ultramafic rocks from the Sefuri Mountains, NW Kyushu, Japan, which were metamorphosed under granulite-facies conditions. One occurs as a thin film of orthopyroxene along the boundary between olivine and plagioclase (orthopyroxene zone). The other is composed of two zones: symplectite of calcic amphibole and spinel on the plagioclase-side (symplectite zone) and calcic amphibole with sporadic orthopyroxene on the olivine-side (tremolite zone). In the tremolite zone, calcic amphibole shows a systematic decrease in Al content and increase in Mg/(Fe +Mg) with decreasing distance from olivine. Local equilibria maintained during the diffusion-controlled corona-forming reaction enable us to apply equilibrium thermodynamics to calcic amphibole and adjacent orthopyroxene. An integrated formulation of the Gibbs method for an Fe–Mg exchange reaction constrains the equilibrium temperature recorded in the tremolite zone to be 600–710 °C. It is significantly lower than the temperature of the granulite-facies metamorphism (800–900 °C) estimated using conventional geothermobarometry. Except for H₂O, the association of calcic amphibole and spinel in the symplectite zone is chemically equivalent to the association of olivine, plagioclase and orthopyroxene that was stable before the corona formation. This suggests that the following orthopyroxene-consuming reaction describes the paragenetic change taking place between 800–900 °C and 600–710 °C, olivine + plagioclase + orthopyroxene + aqueous fluid = calcic amphibole + spinel. In contrast, the overall reaction inferred from microstructures produces orthopyroxene as well as calcic amphibole and spinel at the expense of olivine and plagioclase. This reaction requires removal mainly of MgO that is also responsible for destabilizing the local association of olivine and plagioclase. These features suggest that the presence of orthopyroxene as a product in the corona is not always indicative of an orthopyroxene-producing reaction being responsible for the change of paragenetic relation. Microstructural features should be carefully applied to infer the reaction describing paragenetic change by which we argue the P–T path of the rocks.     

A Study of Tsunami Wave Fission in an Undistorted Experiment

To study tsunami soliton fission and split wave-breaking, an undistorted experiment was carried out which investigated tsunami shoaling on a continental shelf. Three models of the continental shelf were set up in a 205-m long 2-dimensional flume. Each shelf model was 100 m, long with slopes of either 1/100, 1/150, or 1/200. Water surface elevations were measured across the flume, including a dense cluster of wave gages installed around the point of wave-breaking. We propose new methods for calculating wave velocity and the wave-breaking criterion based on our interpretation of time series data of water surface elevation. At the point of wave-breaking, the maximum slope of water surface is between 20 to 50 deg., while the ratio of surface water particle horizontal velocity to wave velocity is from 0.5 to 1.2. The values determined by our study are larger than what has been reported by other researchers.     

A study of groundwater irrigation water quality in south-central Bangladesh: a geo-statistical model approach using GIS and multivariate statistics

Southern Bangladesh’s irrigation and drinking water is threatened by saline intrusion. This study aimed to establish an irrigation water quality index (IWQI) using a geostatistical model and multivariate indices in Gopalganj district, south-central Bangladesh. Groundwater samples were taken randomly (different depths) in two seasons (wet-monsoon and dry-monsoon). Hydrochemical analysis revealed groundwater in this area was neutral to slightly alkaline and dominating cations were Na⁺, Mg²⁺, and Ca²⁺ along with major anions Cl^? and HCO₃ ^?. Principal component analysis and Gibbs plot helped explain possible geochemical processes in the aquifer. The irrigation water evaluation indices showed: electrical conductivity (EC) >750 µS/cm, moderate to extreme saline; sodium adsorption ratio (SAR), excellent to doubtful; total hardness (TH), moderate to very hard; residual sodium bicarbonate, safe to marginal; Kelly’s ratio >1; soluble sodium percentage (SSP), fair to poor; magnesium adsorption ratio, harmful for soil; and IWQI, moderate to suitable. In addition, the best fitted semivariogram for IWQI, EC, SAR, SSP, and TH confirmed that most parameters had strong spatial dependence and others had moderate to weak spatial dependence. This variation might be due to the different origin/sources of major contributing ions along with the influence of variable river flow and small anthropogenic contributions. Furthermore, the spatial distribution maps for IWQI, EC, SSP, and TH during both seasons confirmed the influence of salinity from the sea; low-flow in the major river system was the driving factor of overall groundwater quality in the study area. These findings may contribute to management of irrigation and/or drinking water in regions with similar groundwater problems.     

Adsorption characteristics of natural organic matter on activated carbons with different pore size distribution

The adsorption characteristics of natural organic matter (NOM) were investigated on the basis of fluorescence excitation emission matrix (EEM) by using four different coal-based activated carbons (ACs). For each AC, batch adsorption isotherms were analyzed using a modified Freundlich isotherm model on the basis of the fluorescence intensity of three major fluorescence peaks appeared in the fluorescence EEM reported to be reflective of the humic acid-like (P1), fulvic acid-like (P2) and aromatic protein-like (P3) substances, respectively, together with the well-used overall quality indices of dissolved organic carbon (DOC) and ultraviolet absorbance at the wavelength of 260 nm (UV260). It was found that, for all five quality indices, the adsorption capacity differed with the ACs used, and the modified Freundlich isotherm constant K estimated for P1, P2 and P3 was in close correlation with that of the total organic matter evaluated by DOC. Moreover, no matter which AC was concerned, the magnitude of the estimated K and the removal rate over a broader range of AC dose for P3 were apparently smaller than those for P1 and P2, suggesting the adsorbability of aromatic protein-like substances was lower than that of the humic acid-like and fulvic acid-like substances. The dependency of the adsorption capacity of NOM on the volume of pores in some specific size ranges of the ACs was also revealed.     

Mountain ordering: A method for classifying mountains based on their morphometry

A new method for classifying mountain morphology, ‘mountain ordering,’ is proposed, and quantitative expressions for various morphological parameters of two ordered mountains in northern Japan were obtained using this method. Mountain order was defined in terms of the closed contour lines on a topographic map. A set of closed, concentric contour lines defines a first-order mountain. Higher-order mountains can be defined as a set of closed contour lines that contain lower-order mountains and that have only one closed contour line for each elevation; they are identified as m + 1th-order mountains, where m represents the order of the enclosed, lower-order mountains. The geomorphometry for a mountain ordered according to this definition permits the identification of systematic relationships between various morphological parameters. The relationships between mountain order and these morphological parameters follow a form similar to that of Horton's laws, and permit the calculation of the ratios of number, area and height; these parameters are sufficient to express the magnitude of a mountain's dissection. The size–frequency distribution for area and height shows self-similarity for ordered mountains, and determines their fractal dimensions. Furthermore, the relationship between area and height, which has the form of a power function, describes the relief structure of ordered mountains. Copyright © 1999 John Wiley & Sons, Ltd.     

Non-monotonic optimal damper placement via steepest direction search

An efficient and systematic procedure is proposed for finding the optimal damper positioning to minimize the dynamic compliance of a 3-D shear building model. The dynamic compliance is expressed in terms of the transfer function amplitudes of the local interstorey drifts evaluated at the undamped fundamental natural frequency. The dynamic compliance is minimized subject to a constraint on the sum of the damping coefficients of added dampers. Optimality criteria are derived and the optimal damper positioning is determined via an original steepest direction search algorithm. This algorithm enables one to find an optimal damper positioning sequentially for gradually increasing damper capacity levels. A non-monotonic design path with respect to the total damper capacity level often appears in the application of this algorithm. A new augmented algorithm via parameter switching is devised to find this non-monotonic design path. Copyright © 1999 John Wiley & Sons, Ltd.     

Distribution of sea cucumbers in relation to sediment characteristics in coral reef lagoons and adjacent waters around Ishigaki Island,southern Japan

To elucidate which environmental factors affect lagoonal‐scale sea cucumber distributions in Ishigaki Island, Okinawa, Japan, intertidal and subtidal areas of three coral reef lagoons were classified into several ground divisions by bottom characteristics, and sea cucumber densities therein were compared with the composition of sediment cover, grain size and organic content, and coverage of macroalgae, seagrass, and massive corals. Holothuria atra, Holothuria leucospilota, Stichopus chloronotus, and Synapta maculata had highest densities in the nearshore areas but were rare in reef flats, probably because of wave disturbance and low areal cover of sand sediment as potential feeding environments. No relationship was observed between sea cucumber densities and sediment organic content or grain size. Thus, even if these sea cucumbers have selectivity for habitats with a high sediment organic content, the effect of such selectivity on the distribution seems to be limited to relatively small areas. The sea cucumber distributions can be classified by bottom sediment/biota composition into bedrock (H. leucospilota), sand (H. atra), and lagoonal types (St. chloronotus and Sy. maculata). These habitat selections were possibly related to various aspects of sea cucumber ecology such as refuge from predators or turbulence, or settlement and nursery place, which have implications for importance of the complexity of lagoonal‐scale topography and sediment/biota conditions for the coexistence of various holothurian species.     

H I observations of galaxies behind the Milky Way in the Puppis region

We report 21-cm H  i line observations of 161 galaxies located behind the Milky Way, in the Puppis region. The observations have been carried out with the Nançay radio telescope, resulting in 101 detections. Most of the galaxies observed appear in the ESO catalogue, and present apparent diameters larger than 1.6 arcmin. We show that the detection rate is strongly related to the apparent diameter; it is as high as 76 per cent for diameters larger than 1.6 arcmin. Half of the non-detections result, in fact, from an insufficient velocity coverage. Global parameters of the detected galaxies are computed, after a careful discussion of the correction for Galactic absorption. Our H  I data are then compared with those obtained by Kraan-Korteweg & Huchtmeier with the Effelsberg radio telescope for 20 galaxies observed in common: the agreement is excellent, implying respective uncertainties on recession velocities and on H  I fluxes lower than 10 km s⁻¹ and 2 Jy km s⁻¹ on average. Finally, we find that the detected galaxies follow well the correlation between the optical linear diameter and the H  I mass found by Haynes & Giovanelli. This result shows that our diameter corrections for Galactic absorption A_B are quite good, except for eight objects which are heavily obscured ( A_B 2.3), or have a very small diameter, lower than 0.5 arcmin.