A simple model of drainage flow in a valley

A model of the drainage flow in a valley under calm conditions has been developed on the basis of the conservation laws of mass, momentum, and heat. The inflow of mass and heat from side-slopes is incorporated, and the momentum and sensible heat exchanges between valley drainage flow and valley floor are parameterized.The characteristic velocity of valley drainage flow is expressed in terms of the following parameters: three potential temperature differences representing the temperature field in the valey; topographic parameters of the valley; mean bulk coefficients representing the aerodynamic conditions of the valley floor; and the stability of the ambient atmosphere. The characteristic thickness includes additional parameters of side-slope flow.That the model satisfactorily predicts the characteristic thickness and velocity is shown from comparison with observations from valleys several hundred meters to a few hundred kilometers long.     

The effect of the Mt St Helens eruption on tropospheric and stratospheric ions

Balloon-borne observations of electrical conductivity in the troposphere and stratosphere were performed using conductivity sondes at Garmisch-Partenkirchen, West Germany, from June to November, 1980, after the Mt St Helens eruption. A significant decrease of atmospheric ions in the altitudes from the troposphere to lower stratosphere has been detected until several months after the eruption in comparison with the observational results obtained before the eruption. Simulteneous ruby lidar observation a month after the eruption indicates an increased amount of aerosol at nearly the same altitude as that of conductivity decrease. Several months after the eruption it appears that aerosols detected by lidar and those effective in reducing ion concentration have different profiles.     

Heterogeneous shock-induced thermal radiation in minerals

A 500 channel optical imaging intensifying and spectral digital recording system is used to record the shock-induced radiation emitted from 406 to 821 nm from transparent minerals during the time interval that a shock wave propagates through the sample. Initial results obtained for single crystals of gypsum, calcite and halite in the 30 to 40 GPa (300 to 400 kbar) pressure range demonstrate greybody emission spectra corresponding to temperatures in the 3,000 to 4,000 K range and emissivities ranging from 0.003 to 0.02. In the case of gypsum and calcite, distinctive line spectra, are superimposed on the thermal radiation. The observed color temperatures are a factor of 2 to 10 greater than the Hugoniot temperature, calculable on the basis of continuum thermodynamics and equation of state models for the shock states achieved in the three minerals. These observed high temperatures are believed to be real. We conclude that we are detecting a large number of closed spaced high temperature shear-band regions immediately behind the shock front. A shear instability model, such as proposed independently by Grady (1977, 1980), Ananin et al. (1974), and Horie (1980), in which small zones of highly deforming and melted material are produced which are the source of the detected thermal radiation and have a fractional effective area approximately numerically equal to the measured emissivity, can be used to predict an effective emissivity of 0.0065 directly behind the shock front. If shear band instability arises from viscous flow processes, Grady's model and mineral thermal properties yield for the shocked mineral viscosities values in the range of 10⁹ to 10¹⁵ P immediately behind the shock front.     

A new fault rupture scenario for the 2003 Mw 6.6 Bam earthquake, SE Iran: Insights from the high-resolution QuickBird imagery and field observations

The December 26, 2003 M_w 6.6 Bam earthquake is one of the most disastrous earthquakes in Iran. QuickBird panchromatic and multispectral satellite imagery with 61 cm and 2.4 m ground resolution, respectively provide new insights into the surface rupturing process associated with this earthquake. The results indicate that this earthquake produced a 2–5 km-wide surface rupture zone with a complex geometric pattern. A 10-km-long surface rupture zone developed along the pre-existing Bam fault trace. Two additional surface rupture zones, each 2–5 km long, are oblique to the pre-existing Bam fault in angles of 20–35°. An analysis of geometric and geomorphic features also shows that movement on the Bam fault is mainly right-lateral motion with some compressional component. This interpretation is consistent with field investigations, analysis of aftershocks as well as teleseismic inversion. Therefore, we suggest that the 2003 Bam earthquake occurred on the Bam fault, and that the surface ruptures oblique to the Bam fault are caused by secondary faulting such as synthetic shears (Reidel shears). Our fault model for the Bam earthquake provides a new tectonic scenario for explaining complex surface deformations associated with the Bam earthquake.     

The use of sintered diamond anvils in the MA8 type high-pressure apparatus

A new multi-anvil type high-presure apparatus has been developed using sintered diamond anvils to generate pressures over 30 GPa and temperatures up to about 2000°C. A maximum sample volume of about 1 mm³ is available in this system. The pressure was confirmed by dissociation of forsterite into Mg-perovskite and periclase. The basic techniques and problems in utilizing sintered diamond in the MA8 type high-pressure apparatus are discussed with an emphasis on the future prospect of incorporating simultancous X-ray diffraction observation.     

Assessment of the Uncertainties in the NO2 and O3 Measurements by Visible Spectrometers

The column amounts of nitrogen dioxide (NO2) and ozone (O3) were measured using a visible spectrometer based on the twilight zenith-sky technique at two observatories located at similar latitudes in the northern part of Japan separated by a distance of 150 km. The measurements began in April 1991 at the Moshiri Observatory (44.4°N, 142.3°E) and in April 1994 at the Rikubetsu Observatory (43.5°N, 143.8°E). Since weather conditions and the possible influence from tropospheric pollution were not always identical at these two observatories, the overall accuracy of the measurements was studied comparing these data sets. The first year data obtained at a solar zenith angle of 90 degrees indicated that the NO2 slant column values at sunrise and sunset agreed within 0.36 and 0.54 × 1016 cm-2, respectively, corresponding to 5 % (June) and to 12 % (December) of the columns. The O3 values agreed within 0.76 × 1019 cm-2, corresponding to 4 % (March) 6 % (August) of the columns, although a part of the difference was systematic. The O3 column amounts were also compared to those obtained by the Dobson spectrometer at Sapporo (43.5°N, 143.8°E), whose latitude is similar to these observatories. When an air mass factor of 17.5 was used, the two-year Moshiri vertical column values agreed with the Dobson direct sun values to within 15 Dobson Units, or 3 6 % of the column. The difference between the two values was found to be due partly to the change in the air mass factor caused by seasonal and day-to-day changes in the shape of the O3 vertical profiles. These results confirm the reliability of the NO2 and O3 measurements by visible spectrometers at these sites for the Network for the Detection of Stratospheric Change (NDSC).     

OSL dating of glacial deposits during the Last Glacial in the Terskey-Alatoo Range, Kyrgyz Republic

Optically stimulated luminescence (OSL) dating was applied to glacial and loess deposits in the north flank of the Terskey-Alatoo Range, Kyrgyz Republic, to elucidate the glacier chronology of the central Asian mountains during the Last Glacial. Moraines in five parts of study area were classified into four stages (Terskey Stages I–IV) based on their geographical position and elevation, and their moraine rock weathering. According to this classification, the oldest moraines (Terskey Stage I) were at 2100–2250 m a.s.l. and the second-oldest moraines (Terskey Stage II) were at 2400–2700 m a.s.l. Quartz samples from moraines of these two stages were used for OSL dating. The OSL ages of the quartz samples indicate that glacier expansion in the Terskey Stage II occurred between 21 and 29 ka BP.     

Tectono–Magmatic Evolution and Metallogenesis along the Northeast Jiangxi Deep Fault, China

Abstract: From the southernmost part of Jiangsu province to the northeastern part of Jiangxi province, China, the Northeast Jiangxi Deep Fault runs for about 400 km length with a width of 30 to 40 km. This fault marks the suture zone of two ter-ranes of Proterozoic age. At the both sides of the fault, Yanshanian granitic activity is recognized. That is, the Dexing-Wuyuan porphyry belt on the NW side of the fault, and the Damaoshan-Lingshan granite belt on the SE side. The former activity is characterized by the occurrence of small stocks of granodioritic composition, rich in siderophile elements but poor in LIL elements. No distinct Eu anomaly is recognized in the REE pattern, and a low initial ⁸⁷Sr/⁸⁶Sr ratio is reported. Magnetite, sphene and apatite are observed as accessory minerals. On the contrary, granitic activity on the SE side of the fault is characterized by the occurrence of composite batholiths, in general of granitic to monzogranitic composition, rich in LIL and alkali elements but poor in siderophile and alkali earth elements. A strong Eu anamaly is recognized in the REE pattern, and initial ⁸⁷Sr/⁸⁶Sr ratios are as high as 0. 716. Fluorite, zircon and REE minerals are observed as accessory minerals. These two contrasting granitic activities are refered to as syntexis– and transformation–types, respectively, following the classification commonly used in China, and have similar petrochemical characteristics to those defined for the magnetite– and ilmenite–series, and I– and S-type granitoids. Considering that the above igneous activity occurred far from the supposed subduction zone along the East Coast of China, intracontinental A-type (continent to continent) subduction is proposed to have occurred northwestwards along the NE Jiangxi Deep Fault during Yanshanian time due to a strong compressional stress from SE to NW. A-type subduction introduced the continental slab to some depth, and resulted in the production of the paired granitic activity observed on both sides of the fault. Many mineral deposits are associated with both granitic belts. In the Dexing-Wuyuan porphyry belt, the Dexing porphyry Cu and Yinshan polymetallic deposits are representative, whereas in the Damaoshan-Lingshan granite belt, several tens of rare metal deposits are known such as the Geyuan Nb–Ta–W–Sn deposits. Metal assemblages of those deposits reflect the source materials of magmas in both granitic belts.     

Measurement of lower-stratospheric aerosol by a balloon-borne photometer

Height distribution of the stratospheric aerosol extinction coefficient was measured in the altitude range 10 to 20 km by a balloon-borne multi-color sunphotometer in May 1978. It is demonstrated that detailed structures of the distribution of stratospheric aerosol can be remotely measured by the solar occultation method as well as by lidar andin situ particle counter observations. In the aerosol layer appearing at 18 km altitude the extinction coefficient at 800–1000 nm wavelength reached to 3×10^–7 m^–1, which was reasonable compared with lidar observations. Wavelength dependence of the aerosol optical depth was crudely estimated to be proportional to ^–1.5.     

Electron-positron pairs in a mildly relativistic plasma in active galactic nuclei

We investigate the electron-positron pair concentration in an optically thin mildly relativistic plasma which is supposed to exist in active galactic nuclei. Firstly the equilibrium concentration is calculated when copious soft photons are supplied through the cyclotron higher harmonics. It is shown that the attainable states of the plasma are strongly restricted. Secondly we examine the pair production in a hot accretion plasma around a massive black hole, comparing relevant time scales. We find that significant pair production occurs when the accretion rate is moderately high and the infall velocity is slow compared to the free fall.Paper presented at the IAU Third Asian-Pacific Regional Meeting, held in Kyoto, Japan, between 30 September–6 October, 1984