Formulation of a continuously stratified sea model with three-dimensional representation of the upper layer

A two-layered model is considered in which the upper layer is continuously stratified and the lower layer is homogeneous. The system is driven by atmospheric forces. Bottom stress and topography are included in the model. The linear three-dimensional hydrodynamical equations are used to describe the system. Taking the eddy viscosity in the upper layer as inversely proportional to the static stability, the dependent variables are expanded in terms of continuous functions in the vertical (eigenfunctions). Using this method it is possible to compute currents and internal displacements at any depth in the upper layer. The three-dimensional structure of the lower layer is not considered in this model. The equations describing the lower layer are integrated over depth to give depth mean currents. Using a staggered finite-difference grid in the horizontal and a forward time-stepping procedure, numerical test experiments are carried out for a cross section and for a closed rectangular basin.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Large-scale environmental influences on the benthic macroinfauna of the southern Gulf of Mexico

The influence of large-scale natural disturbance from winter storms (‘northers’) and river runoff on the macrobenthic community structure of the southern Gulf of Mexico was investigated in both carbonate and transitional carbonate–terrigenous sedimentary environments. Samples of the infauna were obtained in three seasons from 13 stations from two 250 km transects along 80–170 and 20–50 m water depth. Samples after the northers season had the lowest total number of families and individuals, 114 and 2940, respectively, compared to the dry and rainy seasons with 129 and 132 families and 11580 and 15266 individuals, respectively. Spatial patterns of macroinfauna composition varied across and along the shelf as a response to sedimentary environments and depth. Coarser sediments from the carbonate area harboured the highest mean densities per station with 500–24,000 individuals m⁻² and 108–122 families in total, compared to the transitional sediment with 500–8200 individuals m⁻² and 56–74 families across the three seasons. Univariate and multivariate statistical techniques demonstrated that low densities and number of taxa were associated with winter storms, but storm influence was dependent on depth and sediment type. Multiple linear regression analysis and BIOENV analysis indicated that sediment mean grain size, percentage of clay and organic matter best explained the macroinfauna spatial patterns, although BIOENV indicated that depth has an overriding role. An increase in densities of opportunistic taxa (numerous polychaetes of small sizes) was observed four months after the ‘northers’ and this was more evident in the area of carbonate sediment. Additionally a combined disturbance from northers and river runoff is suspected to be responsible for a naturally impoverished macroinfauna community in the transitional sedimentary environment.     

The impulsive phase of a large solar limb flare of June 20, 1989

On 1989 June 20, we observed in H the impulsive phase of a 3B/X1.6 limb flare with high temporal resolution. Line profiles have been acquired every 2.3 s with an imaging spectrograph. During the eruption of a filament we observed in H a moving plasma blob from what we believe to be a second loop which correlated spatially and temporally with a microwave source at 1.4 GHz observed by VLA. A magnetodynamic model is used to understand the development of the moving plasma blob.     

Composition-Induced Variations in SIMS Instrumental Mass Fractionation during Boron Isotope Ratio Measurements of Silicate Glasses

An analytical artefact is reported here related to differences in instrumental mass fractionation between NIST SRM glasses and natural geological glasses during SIMS boron isotope determinations. The data presented demonstrated an average 3.4‰ difference between the NIST glasses and natural basaltic to rhyolitic glasses mainly in terms of their sputtering-induced fractionation of boron isotopes. As no matrix effect was found among basaltic to rhyolitic glasses, instrumental mass fractionation of most natural glass samples can be corrected by using appropriate glass reference materials. In order to confirm the existence of the compositionally induced variations in boron SIMS instrumental mass bias, the observed offset in SIMS instrumental mass bias has been independently reproduced in two laboratories and the phenomenon has been found to be stable over a period of more than one year. This study highlights the need for a close match between the chemical composition of the reference material and the samples being investigated.     

山东莒南地质公园发现小型兽脚类恐龙 足迹化石Minisauripus

在山东省莒南地质公园内发现6个小型恐龙足迹化石,被归入足迹属Minisauripus。化石产于下白垩统大盛群田家楼组．时代为早白垩世巴列姆（Barremian）-阿普特期（Apdan）。5个较大,长约6cm,产于下部“主”层面上,其中4个组成2节行迹：1个较小,长约3cm,位于“主”层面30cm之上的上部层面上。山东Minisauripus的特征是：足迹个体小（长3．1～5．6cm,宽2．0～3．7cm）,三趾型,略不对称;足迹纵长,各趾近平行,趾垫较清晰;趾末端较钝,但爪迹较尖。Ⅲ趾比Ⅳ趾略长,而Ⅳ趾比Ⅱ趾略长且窄。此外,步幅较长,足长与步长之比约为10：1。与四川、韩国Minisau却淞不同之处是：足迹个体较大,长约是它们的2倍。继中国四川和韩国之后,山东是Minisau而淞在全球的第三个发现点。     

Environment,society and geographical organization: The problem of integral knowledge

This contribution emphasizes the limits constraining the synthetical ability of contemporary science, which are a consequence of the imbalance between the search for partial and relatively simple phenomena and the search for comprehensive complexes. The development of our integral knowledge can be supported by geography which is a discipline studying complex systems. However, it is necessary to search for regularities showing the organization of complex systems. This contribution is an attempt to specify such regularities. Emphasis is put on the role of hierarchical principles in the organization of complex systems. The interaction between hierarchical differentiation of the environment and homogeneous sets of kinds of partial phenomena seems to represent the primary conditioning of evolution: the occurrence of similar phenomena in different external conditions. Regularities of complex systems can be specified in connection with the differentiation of these systems according to principles of rank/scale and evolution. The combination of the two principles enables us to understand the nature of development of society in the environment.     

Early Cretaceous volcaniclastic and quartzose sandstones from north central Nepal: composition,sedimentology and geotectonic significance

Early Cretaceous sandstones and shales from the Thakkhola region (Chukh and Tangbe Formations) were deposited on the subsiding northern (Tethyan) margin of Gondwana; current directions indicate a source area to the south. Whereas the Berriasian Chukh Formation is dominated by quartz arenites, volcaniclastic sandstones and minor conglomerates dominate the Tangbe Formation of Valanginian to Aptian age. Upsection, the composition of the volcaniclastic components changes from mainly basaltic to dominantly dacitic/rhyolitic. Magmatism was preceded and accompanied by strong uplift in the source area of the Chukh and Tangbe clastics, resulting in the erosion of probably more than several hundred meters of pre-Cretaceous sedimentary, metamorphic and plutonic rocks. A geochemical whole rock analysis of basaltic pebble fragments shows their alkaline character and suggests a within-plate geotectonic setting for the volcanic source. This volcanotectonic event is probably related to rifting between Australia and Greater India, where seafloor spreading began in late Valanginian/Hauterivian times.     

The emplacement of intermediate volume ignimbrites: A case study from Roccamonfina Volcano,Southern Italy

A model is presented for the emplacement of intermediate volume ignimbrites based on a study of two 6 km³ volume ignimbrites on Roccamonfina Volcano, Italy. The model considers that the flows were slow moving, and quickly deflated from turbulent to non-turbulent conditions. Yield strength and density increased whereas fluidisation decreased with time and runout of the pyroclastic flows. In proximal locations, on the caldera rim, heterogeneous exposures including discontinuous lithic breccias, stratified and cross-stratified units interbedded with massive ignimbrite suggest deposition from turbulent flows. In medial locations thick, massive ignimbrite occurs associated with three types of co-ignimbrite lithic breccia which we interpret as being emplaced by non-turbulent flows. Multiple grading of different breccia/lithic concentration types within single flow units indicates that internal shear occurred producing overriding or overlapping of the rear of the flow onto the slower-moving front part. This overriding of different parts of non-turbulent pyroclastic flows could be caused by at least two different mechanisms: (1) changes in flow regime, such as hydraulic jumps that may occur at breaks in slope; and (2) periods of increased discharge rate, possibly associated with caldera collapse, producing fresh pulses of lithic-rich material that sheared onto the slower-moving part of the flow in front.We propose that ground surge deposits enriched in pumice compared with their associated ignimbrite probably formed by a flow separation mechanism from the top and front of the pyroclastic flow. These turbulent clouds moved ahead of the non-turbulent lower part of the flow to form stratified pumice-rich deposits. In distal regions well-developed coarse, often clast-supported, pumice concentrations zones and coarse intra-flow-unit lithic concentrations occur within the massive ignimbrite. We suggest that the flows were non-turbulent, possessed a relatively high yield strength and may have moved by plug flow prior to emplacement.