Influence of vegetation change on watershed hydrology: implications for paleoclimatic interpretation of lacustrine δ18O records

Stratigraphic shifts in the oxygen isotopic (¹⁸O) and trace element (Mg and Sr) composition of biogenic carbonate from tropical lake sediment cores are often interpreted as a proxy record of the changing relation between evaporation and precipitation (E/P). Holocene ¹⁸O and Mg and Sr records from Lakes Salpetén and Petén Itzá, Guatemala were apparently affected by drainage basin vegetation changes that influenced watershed hydrology, thereby confounding paleoclimatic interpretations. Oxygen isotope values and trace element concentrations in the two lowland lakes were greatest between ~ 9000 and 6800 ¹⁴C-yr BP, suggesting relatively high E/P, but pollen data indicate moist conditions and extensive forest cover in the early Holocene. The discrepancy between pollen- and geochemically-inferred climate conditions may be reconciled if the high early Holocene ¹⁸O and trace element values were controlled principally by low surface runoff and groundwater flow to the lake, rather than high E/P. Dense forest cover in the early Holocene would have increased evapotranspiration and soil moisture storage, thereby reducing delivery of meteoric water to the lakes. Carbonate ¹⁸O and Mg and Sr decreased between 7200 and 3500 ¹⁴C-yr BP in Lake Salpetén and between 6800 and 5000 ¹⁴C-yr BP in Lake Petén Itzá. This decline coincided with palynologically documented forest loss that may have led to increased surface and groundwater flow to the lakes. In Lake Salpetén, minimum ¹⁸O values (i.e., high lake levels) occurred between 3500 and 1800 ¹⁴C-yr BP. Relatively high lake levels were confirmed by ¹⁴C-dated aquatic gastropods from subaerial soil profiles ~ 1.0–7.5 m above present lake stage. High lake levels were a consequence of lower E/P and/or greater surface runoff and groundwater inflow caused by human-induced deforestation.     

Estimating gambling venue catchments for impact assessment using a calibrated gravity model

Gambling using electronic gaming machines (EGMs) has emerged as a significant public health issue. While social impact assessments are required prior to the granting of new gaming machine licenses in Australia, there are a few established techniques for estimating the spatial distribution of a venue’s clientele. To this end, we calibrated a Huff model of gambling venue catchments based on a geocoded postal survey (n = 7040). We investigated the impact of different venue attractiveness measures, distance measures, distance decay functions, levels of spatial aggregation and venue types on model fit and results. We then compared model estimates for different behavioural subgroups. Our calibrated spatial model is a significant improvement on previously published models, increasing R² from 0.23 to 0.64. Venue catchments differ radically in size and intensity. As different population subgroups are attracted to different venues, there is no single best index of venue attractiveness applicable to all subpopulations. The calibrated Huff model represents a useful regulatory tool for predicting the extent and composition of gambling venue catchments. It may assist in decision-making with regard to new license applications and evaluating the impact of health interventions such as mandated reductions in EGM numbers. Our calibrated parameters may be used to improve model accuracy in other jurisdictions.     

Where Am I? Investigating Map Matching During Self‐Localization With Mobile Eye Tracking in an Urban Environment

Self‐localization is the process of identifying one's current position on a map, and it is a crucial part of any wayfinding process. During self‐localization the wayfinder matches visually perceptible features of the environment, such as landmarks, with map symbols to constrain potential locations on the map. The success of this visual matching process constitutes an important factor for the success of self‐localization. In this research we aim at observing the visual matching process between environment and map during self‐localization with real‐world mobile eye tracking. We report on one orientation and one self‐localization experiment, both in an outdoor urban environment. The gaze data collected during the experiments show that successful participants put significantly more visual attention to those symbols on the map that were helpful in the given situation than unsuccessful participants. A sequence analysis revealed that they also had significantly more switches of visual attention between map symbols and their corresponding landmarks in the environment, which suggests they were following a more effective self‐localization strategy.     

Preprocessing of gravity gradients at the GOCE high-level processing facility

One of the products derived from the gravity field and steady-state ocean circulation explorer (GOCE) observations are the gravity gradients. These gravity gradients are provided in the gradiometer reference frame (GRF) and are calibrated in-flight using satellite shaking and star sensor data. To use these gravity gradients for application in Earth scienes and gravity field analysis, additional preprocessing needs to be done, including corrections for temporal gravity field signals to isolate the static gravity field part, screening for outliers, calibration by comparison with existing external gravity field information and error assessment. The temporal gravity gradient corrections consist of tidal and nontidal corrections. These are all generally below the gravity gradient error level, which is predicted to show a 1/f behaviour for low frequencies. In the outlier detection, the 1/f error is compensated for by subtracting a local median from the data, while the data error is assessed using the median absolute deviation. The local median acts as a high-pass filter and it is robust as is the median absolute deviation. Three different methods have been implemented for the calibration of the gravity gradients. All three methods use a high-pass filter to compensate for the 1/f gravity gradient error. The baseline method uses state-of-the-art global gravity field models and the most accurate results are obtained if star sensor misalignments are estimated along with the calibration parameters. A second calibration method uses GOCE GPS data to estimate a low-degree gravity field model as well as gravity gradient scale factors. Both methods allow to estimate gravity gradient scale factors down to the 10⁻³ level. The third calibration method uses high accurate terrestrial gravity data in selected regions to validate the gravity gradient scale factors, focussing on the measurement band. Gravity gradient scale factors may be estimated down to the 10⁻² level with this method.     

Soil Organic Carbon mapping of partially vegetated agricultural fields with imaging spectroscopy

Soil Organic Carbon (SOC) is one of the key soil properties, but the large spatial variation makes continuous mapping a complex task. Imaging spectroscopy has proven to be an useful technique for mapping of soil properties, but the applicability decreases rapidly when fields are partially covered with vegetation. In this paper we show that with only a few percent fractional maize cover the accuracy of a Partial Least Square Regression (PLSR) based SOC prediction model drops dramatically. However, this problem can be solved with the use of spectral unmixing techniques. First, the fractional maize cover is determined with linear spectral unmixing, taking the illumination and observation angles into account. In a next step the influence of maize is filtered out from the spectral signal by a new procedure termed Residual Spectral Unmixing (RSU). The residual soil spectra resulting from this procedure are used for mapping of SOC using PLSR, which could be done with accuracies comparable to studies performed on bare soil surfaces (Root Mean Standard Error of Calibration = 1.34 g/kg and Root Mean Standard Error of Prediction = 1.65 g/kg). With the presented RSU approach it is possible to filter out the influence of maize from the mixed spectra, and the residual soil spectra contain enough information for mapping of the SOC distribution within agricultural fields. This can improve the applicability of airborne imaging spectroscopy for soil studies in temperate climates, since the use of the RSU approach can extend the flight-window which is often constrained by the presence of vegetation.     

The relation between rigorous and Helmert’s definitions of orthometric heights

Following our earlier definition of the rigorous orthometric height [J Geod 79(1-3):82–92 (2005)] we present the derivation and calculation of the differences between this and the Helmert orthometric height, which is embedded in the vertical datums used in numerous countries. By way of comparison, we also consider Mader and Niethammer’s refinements to the Helmert orthometric height. For a profile across the Canadian Rocky Mountains (maximum height of ~2,800 m), the rigorous correction to Helmert’s height reaches ~13 cm, whereas the Mader and Niethammer corrections only reach ~3 cm. The discrepancy is due mostly to the rigorous correction’s consideration of the geoid-generated gravity disturbance. We also point out that several of the terms derived here are the same as those used in regional gravimetric geoid models, thus simplifying their implementation. This will enable those who currently use Helmert orthometric heights to upgrade them to a more rigorous height system based on the Earth’s gravity field and one that is more compatible with a regional geoid model.     

ARGO upper salinity measurements: perspectives for L-band radiometers calibration and retrieved sea surface salinity validation

With the view of preparing the strategy for the calibration/validation of future L-band satellite radiometers, we examine the salinity variability recorded by Array for Real-Time Geostrophic Oceanography (ARGO) floats in the upper 10-m layer of the surface ocean. Using one year of ARGO measurements,we show that the surface salinity variability at ten days and 200-km scales is above /spl plusmn/0.1 psu for 30% of the drifters and that this variability is larger than 0.2 psu in tropical regions affected by strong river discharges and by precipitations, and in frontal areas characterized by strong mesoscale activity. Vertical gradient observed between 5-10-m depth is much lower than the horizontal variability but leads to systematic biases in the tropics. The South Pacific Ocean appears to be the less variable both vertically and horizontally.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Ex situ cultivation of Aplysinaaerophoba close to in situ conditions: ecological, biochemical and histological aspects

Sponges provide the largest number of biologically active natural products known from the marine environment and continue to be a very well studied phylum of marine fauna. The Mediterranean sponge Aplysina aerophoba accumulates brominated isoxazoline alkaloids such as Aplysinamisin-1, Aerophobin-2, Isofistularin-3 and the biotransformation product Aeroplysinin-1, which possesses, for example, antibiotic and cytotoxic properties. Until now, it is still being discussed which organisms – the sponge itself or associated microorganisms – are responsible for metabolite production. For cultivating Aplysina individuals under ex situ conditions, we surveyed relevant ecological factors in situ and controlled them in our aquarium system. We maintained A. aerophoba for more than 9 months and analysed changes of metabolite content and composition, microbial association as well as morphology in situ and ex situ under different light exposure. Although sponges showed slight reduction during maintenance, ex situ cultivation similar to in situ conditions provides a promising method to keep sponges and obtain their bioactive metabolites.