Three-dimensional model and late stage warping of the Plattengneis Shear Zone in the Eastern Alps

The Plattengneis shear zone is a 250–600 m thick, flat lying, Cretaceous, eclogite facies, mylonitic shear zone, with north-over-south transport direction, that is exposed over almost 1000 km² in the Koralpe region along the eastern margin of the Alps. Although the shear zone is one of the largest in the Alps, its role in the Eoalpine metamorphic evolution and the subsequent exhumation of the region, remain enigmatic and its large-scale geometry is not well understood. The outcrop pattern suggests that the shear zone is made up of a single sheet that is folded into a series of open syn- and antiforms with wavelengths of about 10 km. Eclogite bodies occur above, within and below the shear zone and there is no metamorphic grade change across the shear zone. In the south, the fold axes strike east–west and plunge shallowly to the east. In the north, the fold axes are oriented in north–south direction and form a dome shaped structure of the shear zone. Total shortening during this late stage warping event was of the order of 5%. Indirect evidence constrains this folding event to have occurred between 80 and 50 Ma and the fold geometry implies that the final exhumation in the Koralpe occurred somewhat later than further north. Interestingly, the shear zone appears to strike out of the topography in the south and dip into the topography in the north, so that north of the shear zone only hanging-wall rocks are exposed and south of it only foot-wall rocks. Possibilities for the geometric relationship of the Plattengneis shear zone with the surrounding south dipping detachments are discussed.     

Subduction and back-arc activity at the Hikurangi convergent Margin,New Zealand

The Hikurangi Margin is a region of oblique subduction with northwest-dipping intermediate depth seismicity extending southwest from the Kermadec system to about 42°S. The current episode of subduction is at least 16–20 Ma old. The plate convergence rate varies along the margin from about 60 mm/a at the south end of the Kermadec Trench to about 45 mm/a at 42°S. The age of the Pacific lithosphere adjacent to the Hikurangi Trench is not known.The margin divides at about latitude 39°S into two quite dissimilar parts. The northern part has experienced andesitic volcanism for about 18 Ma, and back-arc extension in the last 4 Ma that has produced a back-arc basin onshore with high heaflow, thin crust and low upper-mantle seismic velocities. The extension appears to have arisen from a seawards migration of the Hikurangi Trench north of 39°S. Here the plate interface is thought to be currently uncoupled, as geodetic data indicate extension of the fore-arc basin, and historic earthquakes have not exceededM _s=7.South of 39°S there is no volcanism and a back-arc basin has been produced by downward flexure of the lithosphere due to strong coupling with the subducting plate. Heatflow in the basin is normal. Evidence for strong coupling comes from historic earthquakes of up to aboutM _s=8 and high rates of uplift on the southeast coast of the North Island.The reason for this division of the margin is not known but may be related to an inferred increase, from northeast to southwest, in the buoyancy of the Pacific lithosphere.     

Characterisation of the Dabla Granitoids, North Khetri Copper Belt, Rajasthan, India: Evidence of Bimodal Anorogenic Felsic Magmatism

The Palaeoproterozoic Dabla granitoid pluton of the North Khetri Copper Belt is located to the east of a NNE-SSW trending lineament with numerous albite-rich intrusives, the intraplate ‘albitite line’. The Dabla pluton is essentially made up of calcic amphibole-bearing granitoids, displaying a concentric bimodal distribution of alkali-feldspar granites, comprising a microcline-albite granite and an albite-granite. The dominant rock type is pink-coloured granite, which is characterised by quartz, microcline, albite and hastingsitic hornblende, and occurs in the marginal parts of the pluton. The volumetrically subordinate albite-granite in the central part of the pluton is invariably white in colour, non-foliated and is mainly composed of quartz, albite and amphibole of actinolite to ferro-actinolite composition. The albite-granite is characterised by low K₂O (0.06-0.09%), Rb (<5 ppm) and Ba (<20 ppm), high Na₂O (7.19-7.36%) and high Na/K ratios (122.4-185.2) as compared to the granite. These rocks are not subjected to any metamorphic overprint, especially the albite-granite, which shows pristine abundances of major and trace elements. The rocks are highly evolved as reflected in their high SiO₂ (72 to 78%) contents and high DI (89.5-97) values. The Dabla granitoids are characterised by similar REE and spider patterns, displaying LREE enriched slopes, flat HREE profiles and strong negative Sr, P, Ti and Eu anomalies suggesting their comagmatic nature. Nevertheless, the granite is relatively more fractionated [(La/Yb)_N = 3.89-8.19] and show higher REE abundances (466-673 ppm) as compared to the albite-granite [(La/Yb)_N = 1.97-2.96; REE = 220-277 ppm]. Distinctive features of these rocks are their low Ca (0.21-1.53%), Mg (<0.02-0.19%), Al (11.84-12.96%) and Sr (12-46 ppm) abundances, high Zr (155-631 ppm), Y (67-156 ppm), Nb (14-91 ppm), and Ga (20-31 ppm) concentrations and high Fe*-number, high Ga/Al ratio and high agpaitic index (AI) values. These features, coupled with their ferroan, alkaline and metaluminous nature, are typical of within-plate aluminous A-type granites. The geochemical data further indicate that the Dabla magma was generated at fairly high temperature, apparently in an upper mantle region, under relatively low H₂O activities and reduced conditions and emplaced at a shallow depth in an extensional tectonic environment.     

Validation of a soil water balance model using soil water content and pressure head data

The validation of soil water balance models and the evaluation of the quality of the model predictions at field‐scale require time‐series of in situ measured model outputs. In our study, we have validated such a model using a 6‐year period with time‐series of automatically recorded, daily volumetric soil water contents measured with the time‐domain reflectometry with intelligent microelements (TRIME) method and daily pressure heads measured with tensiometers. The comparisons of simulated with measured soil water contents and pressure heads were analysed using the modelling efficiency index (IA) and the square root of the mean square error (RMSE) in order to evaluate the prediction quality of the model. In our study, IA and RMSE, obtained either from the comparison of simulated with measured soil water contents or the comparison of calculated with observed pressure heads, in some cases lead to different results regarding the evaluation of the simulation quality of the soil water balance model. For example, a good fit between simulated and observed soil water contents does not necessarily result in a comparably good fit between the corresponding calculated and measured pressure heads. Therefore, a combined use of both measurement techniques, which takes into account their respective advantages and disadvantages, gives a more complete overview on the simulation quality of the soil water balance model than the single use of one of those techniques. Copyright © 2004 John Wiley & Sons, Ltd.     

Parametric cubic splines and geologic shape descriptions

Parametric cubic splines provide a versatile means of describing and sampling shapes and curves commonly found in geology. These splines allow the researcher to treat easily curves which are not single-valued in Cartesian or polar coordinates. In addition, they simultaneously provide approximations to positions, slopes, and curvatures of the curve being considered. In conjunction with simple digitizing equipment and a small computer, the method of parametric cubic spline approximation allows the researcher to analyze curves or outlines in cases where the more rapid technique involving video imaging equipment is either not applicable or not available.     

Hydrostatic-system palsas at Toolik lake,Alaska: Field observations and simulation

Stratigraphic and chemical data from the ice core of an ‘anthropogenic palsa’ at Toolik Lake, Alaska, indicate that the mound formed as a consequence of hydrostatic pressure developed in an isolated hydrologic system within the active layer. Survey data for five palsas over a three-year period suggest that growth was essentially complete at the time of the initial survey; a net decrease of summit elevation is apparent in all five mounds, but complete degradation of the palsas would require several decades at observed rates. Because accurate field measurements of thermal and hydrologic evolution in such features are extremely difficult, simulation of the environmental conditions and events involved in palsa growth is an important supplement to field observation. Both analytic and finite-element models yield results that are in substantial agreement with inferences drawn from observational data.     

The two-step shape and timing of the last deglaciation in Antarctica

The two-step character of the last deglaciation is well recognized in Western Europe, in Greenland and in the North Atlantic. For example, in Greenland, a gradual temperature decrease started at the Bölling (B) around 14.5 ky BP, spanned through the Alleröd (A) and was followed by the cold Younger Dryas (YD) event which terminated abruptly around 11.5 ky BP. Recent results suggest that this BA/YD sequence may have extended throughout all the Northern Hemisphere but the evidence of a late transition cooling is still poor for the Southern Hemisphere. Here we present a detailed isotopic record analyzed in a new ice core drilled at Dome B in East Antarctica that fully demonstrates the existence of an Antarctic cold reversal (ACR). These results suggest that the two-step shape of the last deglaciation has a worldwide character but they also point to noticeable interhemispheric differences. Thus, the coldest part of the ACR, which shows a temperature drop about three times weaker than that recorded during the YD in Greenland, may have preceded the YD. Antarctica did not experienced abrupt changes and the two warming periods started there before they started in Greenland. The links between Southern and Northern Hemisphere climates throughout this period are discussed in the light of additional information derived from the Antarctic dust record.