Cd, Pb, Cu, Ni and Co distribution in the German Bight

Cd, Pb and Cu concentrations, dissolved and total, have been determined in the German Bight. In 1975, 1977, 1978, 1980 and 1983 water samples were collected at 215 sampling stations. In the 1983 mission samples were also analysed for Ni and Co. The samples were filtered and acidified immediately after collection. Analysis was performed by voltammetry.The analytical data indicate that a net portion of the Cd, the Weser being a distinct source for it, will cross the estuarine zone. Open sea Cd levels in the German Bight are about a factor 10 higher than North Atlantic values. Pb, being transported mainly with the suspended particulate phase (up to 99.5%), is better eliminated by sedimentation in the estuaries. Ni and Cu occur mainly in the dissolved phase. Pollution by Co is distinct in the Elbe, but the output is rapidly diluted to background contents below 10 ng kg⁻¹. An interpretation of the results from the different years yields a rather steady state situation in the German Bight.     

LES of turbulent surface shear stress and pressure-gradient-driven flow on shallow continental shelves

Turbulent shear flows on shallow continental shelves (here shallow means that the interaction with the solid, no-slip bottom is important) are of great importance because tide- and wind-driven flows on the shelf are drivers of the transfer of momentum, heat, and mass (gas) across the air–sea interface. These turbulent flows play an important role because vertical mixing and current are vectors for the transport of sediment and bioactive material on continental shelves. Understanding the dynamics of this class of flows presents complications because of the presence of a free surface and also because the flow can be driven by a pressure gradient (a tidal current), a stress at the free surface (a wind-driven current), or a combination of both. In addition, the flow can be modified by the presence of a wave field that can induce Langmuir circulation (Langmuir, Science 87:119–123, 1938). Large eddy simulation is used to quantify the effects of pressure gradient and wind shear on the distinctive structures of the turbulent flow. From these computations, an understanding of the physics governing the turbulence of pressure-driven and wind-driven flows, how they can interact in a normal or a tangential direction, and the effect of wave forcing on these flows is obtained.     

Flood hazard delineation combining geomorphological and hydrological methods: an example in the Northern Iberian Peninsula

Flood mapping requires the combination and integration of geomorphological and hydrological-hydraulic methods; however, despite this, there is very little scientific literature that compares and validates both methods. Two types of analysis are addressed in the present article. On the one hand, maps of flood plains have been elaborated using geomorphological evidence and historical flood data in the mountainous area of northwestern Spain, covering an area of more then 232 km² of floodplains. On the other hand, a hydrometeorological model has been developed (Clark semidistributed unit hydrograph) in the Sarria River basin (155 km², NW Spain). This basin is not gauged, hence the model was subjected to a goodness-of-fit test of its parameter (curve number) by means of Monte Carlo simulation. The peak flows obtained by means of the hydrological model were used for hydraulic modeling (one-phase, one-dimensional and steady flow) in a 4 km² urban stretch of the river bed. The delineation of surface areas affected by floods since 1918, as well as those analyzed subsequent to the geomorphological study, reveals a high degree of reliability in the delineation of the flooded areas with frequent recurrence intervals (<50 years). If we compare these flooded surface areas with the estimate obtained by the hydrological-hydraulic method we can see that the latter method overestimates the extent of the surface water by 144% for very frequent recurrence intervals (>10 years) and underestimates it as the recurrence interval increases, by up to 80% less floodplain for exceptional events (>500 years). Finally, a management map is put forth combining the most reliable results available by integrating both methods. Originally presented at the Sixth International Conference on Geomorphology.     

Plant productivity, predation, and the abundance of black-tailed jackrabbits in the Chihuahuan Desert of Mexico

The abundance of black-tailed jackrabbits (Lepus californicus) can fluctuate dramatically. We used data from the Chihuahuan Desert to test the relative strength of top-down (predation) or bottom-up (food availability) limiting forces. Predictions for the top-down hypothesis were, 1) a positive relationship between coyote (Canis latrans) and jackrabbit abundance (numerical response) and 2) a positive relationship between percent occurrence of jackrabbits in coyote scats and jackrabbit abundance (functional response). Predictions for the bottom-up hypothesis were, 1) plant productivity is directly related to precipitation, 2) jackrabbit abundance is positively related to precipitation and plant productivity, and 3) changes in abundance of jackrabbits over the reproductive season will be directly related to precipitation and plant productivity. We found a limited numerical response but no functional response of coyotes to jackrabbit abundance. Forb productivity was significantly related to annual precipitation levels (r² = 0.69, p = 0.002). Grass productivity was related to annual precipitation (r² = 0.34, p = 0.028). Jackrabbit abundance (r² = 0.38, p = 0.002) and changes in abundance (r² = 0.73, p < 0.001) were significantly related to precipitation and forb and grass productivity. We conclude that precipitation levels and plant productivity affect jackrabbit abundance more than predation levels.     

Tectonic setting of the recent damaging seismic series in the Southeastern Betic Cordillera,Spain

In this work we analyze the tectonic setting of the recent damaging seismic series occurred in the Internal Zones of the eastern Betic Cordillera (SE Spain) and surrounding areas, the tectonic region where took place the 11th May 2011 Mw 5.2 Lorca earthquake. We revisit and make a synthesis of the seven largest and damaging seismic series occurred from 1984 to 2011. We analyze their seismotectonic setting, and their geological sources under the light of recent advances in the knowledge on active faults, neotectonics, seismotectonics and stress regime, with special attention focused on the Lorca Earthquake. These seismic series are characterized by two types of focal mechanisms, produced mainly by two sets of active faults, NNW–SSE to NNE–SSW small (no larger than 20–30 km) extensional faults with some strike slip component, and E–W to NE–SW large strike slip faults (more than 50 km long) with some compressional component (oblique slip faults). The normal fault earthquakes related to the smaller faults are dominant in the interior of large crustal tectonic blocks that are bounded by the large E–W to NE–SW strike-slip faults. The strike slip earthquakes are associated to the reactivation of segments or intersegment regions of the large E–W to NE–SW faults bounding those crustal tectonic blocks. Most of the seismic series studied in this work can be interpreted as part of the background seismicity that occurs within the crustal blocks that are strained under a transpressional regime driven by the major strike slip shear corridors bounding the blocks. The seismotectonic analysis and the phenomenology of the studied series indicate that it is usual the occurrence of damaging compound earthquakes of M  \(\sim \)  5.0 associated with triggering processes driven by coseismic stress transfer. These processes mainly occur in the seismic series generated by NNW–SSE to NNE–SSW faults. These mechanical interaction processes may induce a higher frequency of occurrence of this kind of earthquakes than considered in traditional probabilistic seismic hazard assessments and it should be taken into account in future seismic hazard assessments.     

Gas hydrate disturbance fabrics of southern Hydrate Ridge sediments (ODP Leg 204): Relationship with texture and physical properties

Soupy and mousse-like fabrics are disturbance sedimentary features that result from the dissociation of gas hydrate, a process that releases water. During the core retrieval process, soupy and mousse-like fabrics are produced in the gas hydrate-bearing sediments due to changes in pressure and temperature conditions. Therefore, the identification of soupy and mousse-like fabrics can be used as a proxy for the presence of gas hydrate in addition to other evidence, such as pore water freshening or anomalously cool temperature. We present here grain-size results, mineralogical composition and magnetic susceptibility data of soupy and mousse-like samples from the southern Hydrate Ridge (Cascadia accretionary complex) acquired during Leg 204 of the Ocean Drilling Program. In order to study the relationship between sedimentary texture and the presence of gas hydrates, we have compared these results with the main textural and compositional data available from the same area. Most of the disturbed analyzed samples from the summit and the western flank of southern Hydrate Ridge show a mean grain size coarser than the average mean grain size of the hemipelagic samples from the same area. The depositional features of the sediments are not recognised due to disturbance. However, their granulometric statistical parameters and distribution curves, and magnetic susceptibility logs indicate that they correspond to a turbidite facies. These results suggest that gas hydrates in the southern Hydrate Ridge could form preferentially in coarser grain-size layers that could act as conduits feeding gas from below the BSR. Two samples from the uppermost metres near the seafloor at the summit of the southern Hydrate Ridge show a finer mean grain-size value than the average of hemipelagic samples. They were located where the highest amount of gas hydrates was detected, suggesting that in this area the availability of methane gas was high enough to generate gas hydrates, even within low-permeability layers. The mineralogical composition of the soupy and mousse-like sediments does not show any specific characteristic with respect to the other samples from the southern Hydrate Ridge.     

Refining the pre-industrial atmospheric Pb isotope evolution curve in Europe using an 8000 year old peat core from NW Spain

Pb pollution has existed for several millennia and remains relevant today. By using peat cores as environmental archives it is possible to reconstruct this long history on a regional scale. This is a significant contribution to the findings from ice core records, the only other archive recording purely atmospheric additions. Without information that allows linking and comparison between sites regionally, within Europe and elsewhere, our ability to make coherent global models of the natural Pb cycle, and anthropogenic forcing of this cycle, is limited. In this respect, the characteristics of the Pb pre-pollution aerosol (PPA) are important to define globally. We characterize for the first time a PPA in Southern Europe with [Pb] = 0.78 ± 0.86 μg g^− 1, net Pb accumulation rates of 0.032 ± 0.030 mg m^− 2 y^− 1 and a ²⁰⁶Pb / ²⁰⁷Pb signature of 1.25470 ± 0.02575. This PPA Pb isotope signature is more radiogenic than that found thus far in Western and Northern Europe. Spain is a historically important mining site. Using three-isotope plots and a pool of potential Pb isotope signatures, a detailed source appointment of both natural and anthropogenic Pb sources was made. We found evidence of Saharan aridification and its termination ∼4400 BP and/or agricultural signals and strong local control (from rock and soil) of the Pb PPA. Human impact is first recorded at 3210 BP but does not exceed 50% of deposited Pb until 3005 BP. Mines in SE Spain dominate early Pb pollution history at this site. During the rise of Roman rule, contributions come from mines in N, NW and SW Spain with no strong indication of other European mining activities. In Medieval and Industrial times local contributions to the peat bog are reduced.