Full‐scale Applications of Membrane Filtration in Municipal Wastewater Treatment Plants

The performance of one pilot‐scale and two full‐scale membrane bioreactors (MBR) were evaluated based on the control of main operational parameters, composition of microbial community and pathogens concentration in the treated outlet. Plants were designed for 0.75 m³/day (A), 60 m³/day (B) and 30 m³/day (C). Inlet and outlet samples were monitored for chemical oxygen demand (COD), biological oxygen demand, total suspended solids, ammonia nitrogen concentration (NH₄–N), nitrate nitrogen concentration, total Kjeldahl nitrogen, total phosphorus and phosphate phosphorus concentration concentrations. Plants showed good COD removal: 91.9% for Plant A, 97.8% for Plant B and 94.2% for Plant C. The targeted nitrogenous ion was NH₄–N due to the requirements for outlet limits. NH₄–N removal was moderate for Plant A (73.3%) and Plant B (86.1%) and excellent for Plant C (>99%). Excellent phosphorus removal was achieved by Plant A (average outlet concentration was 0.7 mg/L, efficiency 84.7%). Unsatisfactory results for phosphorus removal were achieved at the full‐scale plants due to operational problems. The dependency between the extracellular polymeric substances increase and decreasing mixed liquor volatile suspended solids for both lab and full‐scale plants was confirmed. Soluble microbial product concentrations were reduced by 65–68% after coagulant dosage for Plant A. Outlets from the MBR plants were monitored for the presence of pathogens (thermotolerant coliforms, Escherichia coli, intestinal Enterococci and culturable microorganisms at 22 and 37°C). The treated effluent from Plant A, B and C met Czech national legislation regarding reuse criteria (standards) for environment, irrigation and swimming purposes. Plants B and C were not able to achieve requirements for potable water and personal hygiene quality standards.     

Web-Based GIS as a Tool for Supporting Marine Research

Collecting marine data during hydroacoustic research surveys is a complex task, which not only consists of measurements but also analysis, validation, and interpretation of information acquired by various sensors. Automatic integration, visualization, and processing of collected data allow for a more precise investigation of the researched phenomena. The paper presents a dedicated Web-based system for fusion and dissemination of data from satellite imagery, hydrological measurements using CTD probes, acoustic surveys by multibeam systems, side-scan sonars and singlebeam echosounders, as well as live radar feed and oil spill spread models. The system has been designed as a tool for supporting research using the aforementioned techniques.     

LiDAR and 2D Electrical Resistivity Tomography as a Supplement of Geomorphological Investigations in Urban Areas: a Case Study from the City of Wrocław (SW Poland)

In urbanized areas, particularly in lowland terrains and floors of large river valleys, the natural land configuration is often hard to recognize due to a long history of human activity. Accordingly, archaeological works in cities, which supply knowledge on settlement conditions, are usually accompanied by geological and geomophological research. Lately, data from light detection and ranging (LiDAR) have become a valuable source of information on urban land configuration. Geophysical methods are also becoming increasingly popular in background studies. The paper presents a method of using and linking these sources of spatial information about landforms in such areas. The main aim is to identify to what extent these complementary sources of data and the proposed method can be used in such a specific environment to reconstruct natural, buried terrain morphology. The city of Wroc?aw in Central Europe serves as an example. To this end geomorphometric studies were conducted with the use of digital elevation models (DEMs) based on LiDAR scanning and derivated land-surface parameters—SAGA Wetness Index, Channel Network Base Level and Altitude above Channel Network. The study also involved determining morphological edges and measurements of the meanders of the Odra, as well as expanding information on the spatial distribution of alluvia and the structure of slope breaks. To this end, geophysical measurements were conducted using the Two-Dimensional Electrical Resistivity Tomography method. Additionally, five typical sequences of man-made ground present within the perimeter of the city were distinguished. As a result, a map of the main landforms of Wroc?aw is presented. Finally, we argue that although high resolution DEM and derivate land-surface parameters are very useful in terrain analysis, places with thick man-made ground or strongly levelled areas must be recognized by geoarchaeological excavations or geological bore holes. The geophysical survey is useful to identify buried morphological edges and older relief elements in open areas.     

Smectite suspension structural behaviour

Smectite suspensions, at low solids contents, are known to be naturally high in volume with diverse structural properties. The changing structural properties of smectite aqueous suspensions in the absence and presence of calcium ions were investigated using an acoustosizer and an advanced cryo-SEM technique to further understand and thereby control their environmental impact.In the absence of Ca(II) ions, smectite particles are present as a colloidally stable sol due to electrical double layer repulsion of the negatively charged platelets. The smectite network is observed to be extended throughout the suspension via clay platelets networking with an edge–edge (EE) orientation due to high basal surface repulsion. After the initial addition of Ca(II) ions, the smectite negative zeta potential reduces and the smectite platelets coagulate forming 2 µm aggregates. The platelets are randomly orientated, lettuce-like, coagulated aggregates with a high presence of both edge–edge (EE) and edge–face (EF) orientations. After equilibration, the smectite platelets forming an orientated honeycomb cellular structure comprised of face–face (FF) multiply sheet aggregates. The voids in the cellular structure are larger than prior to Ca(II) addition, measured at 2–8 µm.The changing structural properties of a smectite suspension in the absence and presence of Ca(II) greatly influence smectite stability and in turn, mineral processing and/or environmental management. Adequate time is required to allow suppression of the initial swelling of the smectite, full Ca(II) exchange and platelet aggregation.     

Testing Texture of VHR Panchromatic Data as a Feature of Land Cover Classification

While it is well-known that texture can be used to classify very high resolution (VHR) data, the limits of its applicability have not been unequivocally specified. This study examines whether it is possible to divide satellite images into two classes associated with “low” and “high” texture values in the initial stage of processing VHR images. This approach can be effectively used in object-oriented classification. Based on the panchromatic channel of KOMPSAT-2 images from five areas of Europe, datasets with down-sampled pixel resolutions of 1, 2, 4, 8, and 16 m were prepared. These images were processed using different texture analysis techniques in order to discriminate between basic land cover classes. Results were assessed using the normalized feature space distance expressed by the Jeffries–Matusita distance. The best results were observed for images with the highest resolution processed by the Laplacian filter. Our research shows that a classification approach based on the idea of “low” and “high” textures can be effectively applied to panchromatic data with a resolution of 8 m or higher.     

The size distributions of asteroid families in the SDSS Moving Object Catalog 4

Asteroid families, traditionally defined as clusters of objects in orbital parameter space, often have distinctive optical colors. We show that the separation of family members from background interlopers can be improved with the aid of SDSS colors as a qualifier for family membership. Based on an ∼88,000 object subset of the Sloan Digital Sky Survey Moving Object Catalog 4 with available proper orbital elements, we define 37 statistically robust asteroid families with at least 100 members (12 families have over 1000 members) using a simple Gaussian distribution model in both orbital and color space. The interloper rejection rate based on colors is typically ∼10% for a given orbital family definition, with four families that can be reliably isolated only with the aid of colors. About 50% of all objects in this data set belong to families, and this fraction varies from about 35% for objects brighter than an H magnitude of 13 and rises to 60% for objects fainter than this. The fraction of C-type objects in families decreases with increasing H magnitude for H>13, while the fraction of S-type objects above this limit remains effectively constant. This suggests that S-type objects require a shorter timescale for equilibrating the background and family size distributions via collisional processing. The size distribution varies significantly among families, and is typically different from size distributions for background populations. The size distributions for 15 families display a well-defined change of slope and can be modeled as a “broken” double power-law. Such “broken” size distributions are twice as likely for S-type familes than for C-type families (73% vs. 36%), and are dominated by dynamically old families. The remaining families with size distributions that can be modeled as a single power law are dominated by young families (<1 Gyr). When size distribution requires a double power-law model, the two slopes are correlated and are steeper for S-type families. No such slope-color correlation is discernible for families whose size distribution follows a single power law. For several very populous families, we find that the size distribution varies with the distance from the core in orbital-color space, such that small objects are more prevalent in the family outskirts. This “size sorting” is consistent with predictions based on the Yarkovsky effect.     

A hot film anemometer for the Martian atmosphere

A novel design of a wind sensor for the surface of Mars is described. This sensor is to be included in the Rover Environment Monitoring Station (REMS) to be launched as a part of the Mars Science Laboratory in 2009. A 2D hot film anemometer composed of four hot points and a reference point has been conceived and implemented in the preliminary design model. It uses a closed thermal feedback loop based on thermal sigma-delta modulation. In this paper, the first results obtained in a Mars-like environment are shown, and indicate that sensitivities are expected to be in the range of 0.5 m/s and 10° in wind speed and direction.     

Radiation mechanisms and geometry of Cygnus X-1 in the soft state

We present X-ray/ γ -ray spectra of Cyg X-1 observed during the transition from the hard to the soft state and in the soft state by ASCA , RXTE and CGRO /OSSE in 1996 May and June. The spectra consist of a dominant soft component below ∼2 keV and a power-law-like continuum extending to at least ∼800 keV. We interpret them as emission from an optically thick, cold accretion disc and from an optically thin, non-thermal corona above the disc. A fraction f ≳0.5 of total available power is dissipated in the corona.
We model the soft component by multicolour blackbody disc emission taking into account the torque-free inner-boundary condition. If the disc extends down to the minimum stable orbit, the ASCA RXTE data yield the most probable black hole mass of M _X≈10 M_⊙ and an accretion rate,     , locating Cyg X-1 in the soft state in the upper part of the stable, gas-pressure-dominated, accretion-disc solution branch.
The spectrum of the corona is well modelled by repeated Compton scattering of seed photons from the disc off electrons with a hybrid, thermal/non-thermal distribution. The electron distribution can be characterized by a Maxwellian with an equilibrium temperature of kT _e∼30–50 keV, a Thomson optical depth of τ ∼0.3 and a quasi-power-law tail. The compactness of the corona is 2≲ℓ_h≲7, and a presence of a significant population of electron–positron pairs is ruled out.
We find strong signatures of Compton reflection from a cold and ionized medium, presumably an accretion disc, with an apparent reflector solid angle, Ω/2π∼0.5–0.7. The reflected continuum is accompanied by a broad iron K α line.