Vertical structure variability in a seasonal simulation of a medium-resolution regional model of the Eastern South Pacific

A seasonal simulation from a medium-resolution ocean general circulation mode (OGCM) is used to investigate the vertical structure variability of the Southeast Pacific (SEP). The focus is on the extra-tropical Rossby wave (ETRW) variability and associated forcing mechanism. Some aspects of the model mean state are validated from available observations, which justifies a vertical mode decomposition of the model variability. The analysis of the baroclinic mode contributions to sea level indicates that the gravest mode is dominant over most of the domain at all frequencies. Annual variability is on average twice as large as the semi-annual variability which is confined near the coast for all the modes. The first baroclinic mode contribution to the annual cycle exhibits a clear westward propagation north of the critical latitude. The higher-order modes only contribute near the coast where they are associated with vertically propagating energy. The residual variability, which is the energy at all timescales other than annual and semi-annual periods peaks offshore between 20°S and 30°S for all baroclinic modes. The third baroclinic mode also exhibits a relative maximum variability off the coast of Peru south of the critical latitude of the annual cycle (13°S), where the Peru–Chile Undercurrent is the most intense. Sensitivity experiments to the atmospheric and boundary forcing suggest that the residual variability results from the non-linear interaction between annual Rossby waves and the mean flow, while the annual ETRWs in the model result from the summed-contribution from both the local wind stress and remote equatorial forcing. Overall the study extends the classical analysis of sea level variability in the SEP based on linear theory, and suggests that the peculiarities of the baroclinic modes need to be taken into account for interpreting the sea level variability and understanding its connection with the equatorial variability.     

Quantification of changes in current intensities induced by wave overtopping around low-crested structures

The phenomenon of overtopping is traditionally studied for well-emerged harbour structures and often focuses on safety and stability. In this paper laboratory tests are presented and analysed to sharpen the hypothesis that overtopping is capable of changing the horizontal circulation pattern around low-crested structures. A unique data set from laboratory experiments was acquired in the wave basin at Delft University of Technology. The experiments were performed using an emerged impermeable low-crested structure (three freeboards and three different wave conditions for each freeboard) and yielded nine different combinations of set-up and overtopping driving forces. Using this information it was possible to quantify the changes in cross-shore and longshore velocity induced by the overtopping and the set-up changes under the different freeboard and wave conditions described. It is found that overtopping enhances the outgoing flows (longshore velocities parallel to the structure) away from the lee side of the structure and dampens the water level gradient driven flow towards the structure.     

Magmatic and tectonic history of Jurassic ophiolites and associated granitoids from the South Apuseni Mountains (Romania)

The Jurassic ophiolites in the South Apuseni Mountains represent remnants of the Neotethys Ocean and belong to the East Vardar ophiolites that contain ophiolite fragments as well as granitoids and volcanics with island-arc affinity. New U–Pb zircon ages, and Sr and Nd isotope ratios give insights into their tectono-magmatic history. The ophiolite lithologies show tholeiitic MOR-type affinities, but are occasionally slightly enriched in Th and U, and depleted in Nb, which indicates that they probably formed in a marginal or back-arc basin. These ophiolites are associated with calc-alkaline granitoids and volcanics, which show trace element signatures characteristic for subduction-enrichment (high LILE, low HFSE). Low ⁸⁷Sr/⁸⁶Sr ratios (0.703836–0.704550) and high ¹⁴³Nd/¹⁴⁴Nd ratios (0.512599–0.512616) of the calc-alkaline series overlap with the ratios measured in the ophiolitic rocks (0.703863–0.704303 and 0.512496–0.512673), and hence show no contamination with continental crust. This excludes a collisional to post-collisional origin of the granitoids and is consistent with the previously proposed intra-oceanic island arc setting. The new U–Pb ages of the ophiolite lithologies (158.9–155.9 Ma, Oxfordian to Early Kimmeridgian) and granitoids (158.6–152.9 Ma, latest Oxfordian to Late Kimmeridgian) indicate that the two distinct magmatic series evolved within a narrow time range. It is proposed that the ophiolites and island arc granitoids formed above a long-lived NE-dipping subduction zone. A sudden flip in subduction polarity led to collision between island arc and continental margin, immediately followed by obduction of the ophiolites and granitoids on top of the continental margin of the Dacia Mega-Unit. Since the granitoids lack crustal input, they must have intruded the Apuseni ophiolites before both magmatic sequences were obducted onto the continental margin. The age of the youngest granitoid (~153 Ma, Late Kimmeridgian) yields an estimate for the maximum age of emplacement of the South Apuseni ophiolites and associated granitoids onto the Dacia Mega-Unit.     

Experimental constraints on Pt, Pd and Au partitioning and fractionation in silicate melt–sulfide–oxide–aqueous fluid systems at 800 °C, 150 MPa and variable sulfur fugacity

We have performed experiments to constrain the effect of sulfur fugacity (fS₂) and sulfide saturation on the fractionation and partitioning behavior of Pt, Pd and Au in a silicate melt–sulfide crystal/melt–oxide–supercritical aqueous fluid phase–Pt–Pd–Au system. Experiments were performed at 800 °C, 150 MPa, with oxygen fugacity (fO₂) fixed at approximately the nickel–nickel oxide buffer (NNO). Sulfur fugacity in the experiments was varied five orders of magnitude from approximately log fS₂ = 0 to log fS₂ = −5 by using two different sulfide phase assemblages. Assemblage one consisted initially of chalcopyrite plus pyrrhotite and assemblage two was loaded with chalcopyrite plus bornite. At run conditions pyrrhotite transformed compositionally to monosulfide solid solution (mss), chalcopyrite to intermediate solid solution (iss), and in assemblage two chalcopyrite and bornite formed a sulfide melt. Run-product silicate glass (i.e., quenched silicate melt) and crystalline materials were analyzed by using both electron probe microanalysis and laser ablation inductively coupled plasma mass spectrometry. The measured concentrations of Pt, Pd and Au in quenched silicate melt in runs with log fS₂ values ranging from approximately 0.0 to −5.0 do not exhibit any apparent dependence on fS₂. The measured Pt, Pd and Au concentrations in mss do vary as a function of fS₂. The measured Pt, Pd and Au concentrations in iss do not appear dependent on fS₂. The data suggest that fS₂, working in concert with fO₂, via the determinant role that these variables play in controlling the magmatic sulfide phase assemblage and the solubility of Pt, Pd and Au as lattice bound components in magmatic sulfide phases, is a controlling factor on the budgets of Pt, Pd and Au during the evolution of magmatic systems.     

Spectra of a shallow sea—unmixing for class identification and monitoring of coastal waters

Ocean colour-based monitoring of water masses is a promising alternative to monitoring concentrations in heterogeneous coastal seas. Fuzzy methods, such as spectral unmixing, are especially well suited for recognition of water masses from their remote sensing reflectances. However, such models have not yet been applied for water classification and monitoring. In this study, a fully constrained endmember model with simulated endmembers was developed for water class identification in the shallow Wadden Sea and adjacent German Bight. Its performance was examined on in situ measured reflectances and on MERIS satellite data. Water classification by means of unmixing reflectance spectra proved to be successful. When the endmember model was applied to MERIS data, it was able to visualise well-known spatial, tidal, seasonal, and wind-related variations in optical properties in the heterogeneous Wadden Sea. Analyses show that the method is insensitive to small changes in endmembers. Therefore, it can be applied in similar coastal areas. For use in open ocean situations or coastal or inland waters with other specific inherent optical properties, re-simulation of the endmember spectra with local optical properties is required. However, such an adaptation requires only a limited number of local in situ measurements.     

Field observations of SPM using ADV, ADP, and OBS in a shallow estuarine system with low SPM concentration—Vitória Bay, SE Brazil

The present study investigated direct and indirect methods using optical and acoustic instruments for the acquisition of information required to estimate the concentration of suspended particulate matter (SPM) in Vitória Bay, a shallow estuarine system in SE Brazil. The aim was to calibrate and compare the use of different instruments (OBS, ADP, and ADV) to estimate SPM concentration in the water column and near the bed. Concentration was determined by correlating filtered water samples with the optical and acoustic measurements. In general, the methodology proved tenable for the chosen shallow estuarine environment with low SPM concentration (<60?mg/L). Pearson’s coefficient ranged from 0.75 to 0.85, when correlating measurements taken at three sampled depths. Differences in the correlation coefficient values showed that calibration at three depths (near the bed, mid-water column, and near the surface) was more effective than for surface samples alone, even in shallow (???m deep) water. When calibration was attempted for concentration in the entire water column with samples at just one elevation, the correlation value was very low, thus increasing the error in estimating the SPM concentration.     

LA-ICP-MS analysis of single fluid inclusions in a quartz crystal (Madan ore district,Bulgaria)

A “long-living” crystal of barren quartz from Kroushev Dol Pb-Zn deposit (Madan district, Rhodope Mountains, Bulgaria) was studied. The semitransparent base part (the “root”) of the crystal contains abundant inclusions, predominantly along healed cracks, while the upper half or third of the crystal is clear and poor in inclusions. In order to analyze fluid inclusions in the quartz crystal, it was cut into 4 pieces across and along the c-axis and doubly-polished sections were prepared. Fluid inclusions trapped in this quartz supply information about the temporal evolution of paleofluids depositing ore minerals.     

DETERMINATION OF FLUORINE, CHLORINE, BROMINE AND IODINE IN SEVEN GEOCHEMICAL REFERENCE SAMPLES

The concentrations of fluorine, chlorine, bromine and iodine of seven geochemical reference samples have been determined. Analytical techniques were neutron activation analysis for chlorine, bromine and iodine and ion-selective potentiometry for fluorine. After irradiation of the samples, these halogens were separated from the matrix elements by pyrohydrolysis in presence of vanadium (V) oxide. This extraction allows to measure the four halogens in the same sample.     

Mantle dynamics and mantle melting beneath Niuafo’ou Island and the northern Lau back-arc basin

A suite of young volcanic basaltic lavas erupted on the intra-plate island of Niuafo’ou and at active rifts and spreading centres (the King’s Triple Junction and the Northeastern Lau Spreading Centre) in the northern Lau Basin is used to examine the pattern of mantle flow and the dynamics of melting beneath this complex back-arc system. All lavas contain variable amounts of a subduction related component inherited from the Tonga subduction zone to the east. All lavas have higher ⁸⁷Sr/⁸⁶Sr, lower ¹⁴³Nd/¹⁴⁴Nd and more radiogenic Pb isotope compositions than basalts erupted at the Central Lau Spreading Centre in the central Lau Basin, and are interpreted as variable mixtures of subduction-modified, depleted upper mantle, and mantle residues derived from melting beneath the Samoan Islands which has leaked through a tear in the subducting Pacific Plate beneath the Vitiaz Lineament at the northern edge of the Lau Basin. Our data can be used to map out the present-day distribution of Samoan mantle in this region, and show that it influences the compositions of lavas erupted as far as 400 km from the Samoan Islands. The distribution of Samoan-influenced lavas implies south- and southwest-wards mantle flow rates of >4 cm/year. U-series disequilibria in historic Niuafo’ou lavas have average (²³⁰Th/²³⁸U) = 1.13, (²³¹Pa/²³⁵U) = 2.17, (²²⁶Ra/²³⁰Th) = 2.11, and together with major and trace element data require ∼5% partial melting of mantle at between 2 and 3 GPa, with a residual porosity of 0.002 and an upwelling rate of 1 cm year⁻¹. We suggest that intraplate magmatism in the northern Lau Basin results from decompression melting during southward flow of mantle from beneath old (110–120 Ma), relatively thick Pacific oceanic lithosphere to beneath young (<5 Ma), thinner oceanic lithosphere beneath the northern Lau Basin.