The Juchatengo complex: an upper-level ophiolite assemblage of late Paleozoic age in Oaxaca,southern Mexico

International Journal of Earth Sciences - The Juchatengo complex (JC) suite is located between the Proterozoic Oaxacan complex to the north and the Xolapa complex to the south, and was amalgamated...     

Crustal melting and recycling: geochronology and sources of Variscan syn-kinematic anatectic granitoids of the Tormes Dome (Central Iberian Zone). A U–Pb LA-ICP-MS study

International Journal of Earth Sciences - In this study, we report U–Pb Laser Ablation ICP-MS zircon and ID-TIMS monazite ages for peraluminous granitoid plutons...     

Accessing effects and signals of leakage from a CO<Subscript>2</Subscript> reservoir to a shallow freshwater aquifer by reactive transport modelling

CO₂ geological storage is a transitional technology for the mitigation of climate change. In the vicinity of potential CO₂ reservoirs in Hungary, protected freshwater aquifers used for drinking water supplies exist. Effects of disaster events of CO₂ escape and brine displacement to one of these aquifers have been studied by kinetic 1D reactive transport modelling in PHREEQC. Besides verifying that ion concentrations in the freshwater may increase up to drinking water limit values in both scenarios (CO₂ or brine leakage), total porosity of the rock is estimated. Pore volume is expected to increase at the entry point of CO₂ and to decrease at further distances, whereas it shows minor increase along the flow path for the effect of brine inflow. Additionally, electrical conductivity of water is estimated and suggested to be the best parameter to measure for cost-effective monitoring of both worst-case leakage scenarios.     

Socioenvironmental issues of river bed material extraction in the Himalayan piedmont (India)

The present study focuses on the Balason river running through the Himalayan piedmont zone (near Siliguri, India). The objective of the study is an assessment of the environmental effects of river bed material extraction by humans and the dependence of indigenous people on the river and its ecosystem services. The analysis is based on results of field work consisting of geodetic measurements of the river channel and interviews among the local community from the Nimtijot village. Historical hydrological data were also used for the study. The results of the investigation show that the Balason river is heavily affected by excessive exploitation of river bed material during dry season and the replenishment of extracted material in a monsoon season is not always sufficient. It leads to channel deepening. The local community working in the river heavily depends for its livelihood on continuing this activity. A decreasing amount of bed material to be extracted may lead to degradation of the strong relationship between the local community and their natural environment (river).     

Bioerosion and encrustation rates in recent mollusk death assemblages on a supratidal siliciclastic setting,Playa Norte,Veracruz State,Mexico

This study presents both qualitative and quantitative data regarding marine mollusk (gastropods and bivalves) shell bioerosion and encrustation based on death assemblages obtained from a recent supratidal environment in Playa Norte, Veracruz State. The objectives of this study were to assess the nature of bioerosion and encrustation processes and to investigate the role of these taphonomic features contributing to the deterioration of natural shell accumulations within a tropical siliciclastic tidal environment. The assemblage comprises 31 species: 13 gastropods and 18 bivalves. The bioerosion and encrustation degrees were low to moderate for both types. The most abundant traces were predatory gastropod structures (Oichnus paraboloides and O. simplex), whereas sponge borings (Entobia isp.), polychaete dwellings (Caulostrepsis taeniola), and echinoid raspings (Gnatichnus isp.) were less frequent. The encrusting organisms include polychaete serpulids, bryozoans, and rare foraminifers (Homotrema rubrum). Because of the low bioerosion and encrustation degrees occurring in this area, accumulation is expected to predominate over biotic destruction. As deposition conditions (richly fossiliferous carbonate sandstone beds) were similar to those prevailing in the Tuxpan Formation during the Miocene (Langhian), it is suggested that this study provides an equivalent reference to interpret mollusk fossil assemblages located in this site.     

Exploratory Factor Analysis of Wireline Logs Using a Float-Encoded Genetic Algorithm

In the paper, a novel inversion approach is used for the solution of the problem of factor analysis. The float-encoded genetic algorithm as a global optimization method is implemented to extract factor variables using open-hole logging data. The suggested statistical workflow is used to give a reliable estimate for not only the factors but also the related petrophysical properties in hydrocarbon formations. In the first step, the factor loadings and scores are estimated by Jöreskog’s fast approximate method, which are gradually improved by the genetic algorithm. The forward problem is solved to calculate wireline logs directly from the factor scores. In each generation, the observed and calculated well logs are compared to update the factor population. During the genetic algorithm run, the average fitness of factor populations is maximized to give the best fit between the observed and theoretical data. By using the empirical relation between the first factor and formation shaliness, the shale volume is estimated along the borehole. Permeability as a derived quantity also correlates with the first factor, which allows its determination from an independent source. The estimation results agree well with those of independent deterministic modeling and core measurements. Case studies from Hungary and the USA demonstrate the feasibility of the global optimization based factor analysis, which provides a useful tool for improved reservoir characterization.     

An experimental study of Fe–Ni exchange between sulfide melt and olivine at upper mantle conditions: implications for mantle sulfide compositions and phase equilibria

The behavior of nickel in the Earth’s mantle is controlled by sulfide melt–olivine reaction. Prior to this study, experiments were carried out at low pressures with narrow range of Ni/Fe in sulfide melt. As the mantle becomes more reduced with depth, experiments at comparable conditions provide an assessment of the effect of pressure at low-oxygen fugacity conditions. In this study, we constrain the Fe–Ni composition of molten sulfide in the Earth’s upper mantle via sulfide melt–olivine reaction experiments at 2 GPa, 1200 and 1400 °C, with sulfide melt \(X_{{{\text{Ni}}}}^{{{\text{Sulfide}}}}=\frac{{{\text{Ni}}}}{{{\text{Ni}}+{\text{Fe}}}}\) (atomic ratio) ranging from 0 to 0.94. To verify the approach to equilibrium and to explore the effect of \({f_{{{\text{O}}_{\text{2}}}}}\) on Fe–Ni exchange between phases, four different suites of experiments were conducted, varying in their experimental geometry and initial composition. Effects of Ni secondary fluorescence on olivine analyses were corrected using the PENELOPE algorithm (Baró et al., Nucl Instrum Methods Phys Res B 100:31–46, 1995), “zero time” experiments, and measurements before and after dissolution of surrounding sulfides. Oxygen fugacities in the experiments, estimated from the measured O contents of sulfide melts and from the compositions of coexisting olivines, were 3.0?±?1.0 log units more reduced than the fayalite–magnetite-quartz (FMQ) buffer (suite 1, 2 and 3), and FMQ ??1 or more oxidized (suite 4). For the reduced (suites 1–3) experiments, Fe–Ni distribution coefficients \(K_{{\text{D}}}^{{}}=\frac{{(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}/X_{{{\text{Fe}}}}^{{{\text{sulfide}}}})}}{{(X_{{{\text{Ni}}}}^{{{\text{olivine}}}}/X_{{{\text{Fe}}}}^{{{\text{olivine}}}})}}\) are small, averaging 10.0?±?5.7, with little variation as a function of total Ni content. More oxidized experiments (suite 4) give larger values of K_D (21.1–25.2). Compared to previous determinations at 100 kPa, values of K_D from this study are chiefly lower, in large part owing to the more reduced conditions of the experiments. The observed difference does not seem attributable to differences in temperature and pressure between experimental studies. It may be related in part to the effects of metal/sulfur ratio in sulfide melt. Application of these results to the composition of molten sulfide in peridotite indicates that compositions are intermediate in composition (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.4–0.6) in the shallow mantle at 50 km, becomes more Ni rich with depth as the O content of the melt diminishes, reaching a maximum (0.6–0.7) at depths near 80–120 km, and then becomes more Fe rich in the deeper mantle where conditions are more reduced, approaching (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.28)?>?140 km depth. Because Ni-rich sulfide in the shallow upper mantle melts at lower temperature than more Fe-rich compositions, mantle sulfide is likely molten in much of the deep continental lithosphere, including regions of diamond formation.     

Origins and evolution of rhyolitic magmas in the central Snake River Plain: insights from coupled high-precision geochronology,oxygen isotope,and hafnium isotope analyses of zircon

We present new high-precision CA-ID-TIMS and in situ U–Pb ages together with Hf and O isotopic analyses (analyses performed all on the same grains) from four tuffs from the 15?10 Ma Bruneau–Jarbidge center of the Snake River Plain and from three rhyolitic units from the Kimberly borehole in the neighboring 10?6 Ma Twin Falls volcanic center. We find significant intrasample diversity in zircon ages (ranges of up to 3 Myr) and in δ¹⁸O (ranges of up to 6‰) and ε_Hf (ranges of up to 24 ε units) values. Zircon rims are also more homogeneous than the associated cores, and we show that zircon rim growth occurs faster than the resolution of in situ dating techniques. CA-ID-TIMS dating of a subset of zircon grains from the Twin Falls samples reveals complex crystallization histories spanning 10⁴–10⁶ years prior to some eruptions, suggesting that magma genesis was characterized by the cyclic remelting of buried volcanic rocks and intrusions associated with previous magmatic episodes. Age-dependent trends in zircon isotopic compositions show that rhyolite production in the Yellowstone hotspot track is driven by the mixing of mantle-derived melts (normal δ¹⁸O and ε_Hf) and a combination of Precambrian basement rock (normal δ¹⁸O and ε_Hf down to ??60) and shallow Mesozoic and Cenozoic age rocks, some of which are hydrothermally altered (to low δ¹⁸O values) by earlier stages of Snake River Plain magmatism. These crustal melts hybridize with juvenile basalts and rhyolites to produce the erupted rhyolites. We also observe that the Precambrian basement rock is only an important component in the erupted magmas in the first eruption at each caldera center, suggesting that the accumulation of new intrusions quickly builds an upper crustal intrusive body which is isolated from the Precambrian basement and evolves towards more isotopically juvenile and lower-δ¹⁸O compositions over time.