Preliminary Rock-Slope-Susceptibility Assessment Using GIS and the SMR Classification

This paper aims to examine the impact of large-scale structuraladjustments (like the Greater Dhaka Flood Protection Project, GDFPP) on local living environment.It focuses the importance of environmental factors in flood hazard mitigation, and examines theenvironmental attitudes of the floodplain residents arising from the large-scale structural adjustments.Based on `perceived natural hazard research perspectives', this paper examines: (i) the reasons for persistentfloodplain occupation, and (ii) the importance of environmental factors in the choice, motivations and decision-makingof floodplain residents.This research used data collected from 300 households situated inthe eastern part of Dhaka. The face-to-face household survey data provided individuals' responses to a structuredquestionnaire on hazards and environment. Survey concerned urban floodplains, and looked fordata on housing, household characteristics, and residents' attitudes. Results of interview surveys wereused to: (i) explore the reasons of floodplain occupation, and (ii) residents' attitudes to tolerable levelof flood risk and willingness to accept environmental change resulting from the proposed structural embankments inthe eastern perimeter of Dhaka City, Bangladesh.Findings revealed that floodplain occupation (by theindividuals' decision-making) was a result of overall reaction to the Government's structuraladjustment policies that resulted from institutional, locational and socio-economic factors. The attitude survey results provided residents' perception to hazards and environment to be dependenton the socio-economic factors – but in a complex manner, many factors are interrelated.In addition to support for structural embankments, the study sample displayed a common concernand widespread environmental awareness. In terms of any `trade-off' between thebenefits (resources) from the embankments and costs (hazards) due to the detrimental impact on environment, the residents of Dhaka, despite some concern forsacrificing embankments for environment, tended to show a generalconsensus for embankments.     

Environmental impact of heavy-metal dispersion in the Huerva River (Iberian Range,NE Spain)

In this study, the methodology of geochemical prospecting has been applied to the study of cadmium, lead, copper and zinc dispersion in the fine sediments of the upper course of the Huerva River (Iberian Range, NE Spain). The survey was organised in two stages: (1) general sampling along the river and its tributary channels, aimed at selecting the sections with the highest contents of the target elements, and (2) detailed study of those sections, aimed at an interpretation of possible positive geochemical anomalies and identification of their sources. The results of this study prove the existence of multiple and complex sources, with a significant influence of sources related to anthropogenic activity. However, the system shows a good ability to depurate itself under current conditions.     

Coal mining along the Warfield Fault, Mingo County, West Virginia: a tale of ups and downs

Mine development along a 15-mile (24 km) section of the Warfield Fault in Mingo County, West Virginia has broadened the geological understanding of the fault and its related structures. The fault has been exposed in two new road cuts, one in the northeast-trending segment at Neely Branch and one in the eastern east-trending segment at the head of Marrowbone Creek. Both exposures show a well-defined normal fault with a 45° to 55° N dip, juxtaposing sandstone/shale packages from the roof and the floor of the Coalburg seam. The fault is associated with a thin gouge zone, some drag folding, and parallel jointing. Its trace tends to run parallel to the crest of the adjacent Warfield Anticline. Based on underground mine development and detailed core drilling, the vertical offset along the fault plane ranges from a maximum of 240 ft (73 m) in the central part of the area near the structural bend to less than 100 ft (30 m) in western and eastern directions. The fault is located along the relatively steeply dipping (locally in excess of 25%) southern limb of the Warfield Anticline, and appears related to a late phase of extension involving folded Pennsylvanian strata. On a regional scale, the lithological variations across the fault do not suggest any appreciable strike-slip component.Underground room and pillar mines in the Coalburg seam north and south of the fault have been greatly impacted by the Warfield structures. Due to the combined (and opposite) effects of the folding and faulting, the northern mines are located up to 400 ft (125 m) higher in elevation than the southern ones. Overland conveyor belts connect mining blocks separated by the fault. The practical mining limit along the steep slopes toward the fault is around 15%. Subsidiary normal faults with offsets in the 5- to 15-ft (1.5–4.5 m) range are fairly common and form major roof control and production hurdles. Overall, the Warfield structures pose an extra challenge to mine development in this part of the Appalachian Coalfields.     

Validation of Landslide Susceptibility Maps; Examples and Applications from a Case Study in Northern Spain

A procedure for validating landslide susceptibility maps wasapplied in a study area in northern Spain and the results obtained compared. Validationwas used to carry out sensitivity analysis for individual variables and combinationsof variables. The validity of different map-making methods was tested, as well as theutility of different types of Favourability Functions. The results obtained show thatvalidation is essential to determine the predictive value of susceptibility maps. Italso helps to better select the most suitable function and significant variables, thus improving the efficiency of the mapping process. Validation based on a temporal strategy makes it possible to derive hazard maps from susceptibility maps.     

The identifiability of parameters in a water quality model of the Biebrza River, Poland

The identifiability of model parameters of a steady state water quality model of the Biebrza River and the resulting variation in model results was examined by applying the Monte Carlo method which combines calibration, identifiability analysis, uncertainty analysis, and sensitivity analysis. The water quality model simulates the steady state concentration profiles of chloride, phosphate, ammonium, and nitrate as a function of distance along a river. The water quality model with the best combination of parameter values simulates the observed concentrations very well. However, the range of possible modelled concentrations obtained for other more or less equally eligible combinations of parameter values is rather wide. This range in model outcomes reflects possible errors in the model parameters. Discrepancies between the range in model outcomes and the validation data set are only caused by errors in model structure, or (measurement) errors in boundary conditions or input variables. In this sense the validation procedure is a test of model capability, where the effects of calibration errors are filtered out. It is concluded that, despite some slight deviations between model outcome and observations, the model is successful in simulating the spatial pattern of nutrient concentrations in the Biebrza River.     

Space-time mapping of soil salinity using probabilistic bayesian maximum entropy

The mapping of saline soils is the first task before any reclamation effort. Reclamation is based on the knowledge of soil salinity in space and how it evolves with time. Soil salinity is traditionally determined by soil sampling and laboratory analysis. Recently, it became possible to complement these hard data with soft secondary data made available using field sensors like electrode probes. In this study, we had two data sets. The first includes measurements of field salinity (EC_a) at 413 locations and 19 time instants. The second, which is a subset of the first (13 to 20 locations), contains, in addition to EC_a, salinity determined in the laboratory (EC_2.5). Based on a procedure of cross-validation, we compared the prediction performance in the space-time domain of 3 methods: kriging using either only hard data (HK) or hard and mid interval soft data (HMIK), and Bayesian maximum entropy (BME) using probabilistic soft data. We found that BME was less biased, more accurate and giving estimates, which were better correlated with the observed values than the two kriging techniques. In addition, BME allowed one to delineate with better detail saline from non-saline areas.     

Rhenium and chalcophile elements in basaltic glasses from Ko’olau and Moloka’i volcanoes: Magmatic outgassing and composition of the Hawaiian plume

The behavior of chalcophile metals in volcanic environments is important for a variety of economic and environmental applications, and for understanding large-scale processes such as crustal recycling into the mantle. In order to better define the behavior of chalcophile metals in ocean island volcanoes, we measured the concentrations of Re, Cd, Bi, Cu, Pb, Zn, Pt, S, and a suite of major elements and lithophile trace elements in moderately evolved (6-7% MgO) tholeiitic glasses from Ko’olau and Moloka’i volcanoes. Correlated variations in the Re, Cd, and S contents of these glasses are consistent with loss of these elements as volatile species during magmatic outgassing. Bismuth also shows a good correlation with S in the Ko’olau glasses, but undegassed glasses from Moloka’i have unexpectedly low Bi contents. Rhenium appears to have been more volatile than either Cd or Bi in these magmas.Undegassed glasses with 880-1400 ppm S have 1.2-1.5 ppb Re and 130-145 ppb Cd. In contrast, outgassed melts with low S (<200 ppm) are depleted in these elements by factors of 2-5. Key ratios such as Re/Yb and Cu/Re are fractionated significantly from mantle values. Copper, Pb, and Pt contents of these glasses show no correlation with S, ruling out segregation of an immiscible magmatic sulfide phase as the cause of these variations. Undegassed Hawaiian tholeiites have Re/Yb ratios significantly higher than those of MORB, and extend to values greater than that of the primitive mantle. Loss of Re during outgassing of ocean island volcanoes, may help resolve the apparent paradox of low Re/Os ratios in ocean island basalts with radiogenic Os isotopic compositions. Plume source regions with Re/Yb ratios greater than that of the primitive mantle may provide at least a partial solution to the “missing Re” problem in which one or more reservoirs with high Re/Yb are required to balance the low Re/Yb of MORB.Lithophile trace element compositions of most Ko’olau and Moloka’i tholeiites are consistent with variable degrees of melting of fertile mantle peridotite. However, light rare earth element (LREE)-enriched glasses have trace element compositions more consistent with a garnet-rich source having a distinctive trace element composition. This provides additional evidence for a unique source component possibly related to recycled oceanic crust contributing to Ko’olau tholeiites.     

Découverte d'un diatrème de kimberlite diamantifère à Séguéla en Côte-d'Ivoire

The Séguéla area in Ivory Coast is known for its diamond-bearing field related to dykes of kimberlite and lamproite. These dykes, devoid of any deformation and metamorphism, crosscut the Birimian formations. Their N 170° orientation is controlled by the tectonized contact between the Archean and the Paleoproterozoic shields of the West-African craton. Discovery of a diatreme, with its pipe breccias and well-preserved maar sediments, below the present-day colluvia, attests for the probable recent geological age (Cretaceous?) of the kimberlitic activity. To cite this article: A. Pouclet et al., C. R. Geoscience 336 (2004).     

Detection and 2d modelling of cavities using pole–dipole array

The resistivity method is often used in cave prospecting. In this paper the pole–dipole array ability to detect cavities at different depths and with different water contents is investigated. The research was performed using analogical and numerical modelling. According to the results, empty caves at a depth less than four times its diameter can be easily detected. The ability of the pole–dipole array to detect water-filled caves reaches a minimum at filling percentages of 30–50%. Overburden effects research shows that low resistivity overburden reduces the resolution capability of the array. This study shows that equivalent results can be obtained by modelling the empty caves as infinite resistivity bodies or, alternatively, as very high resistivity ones. The analysis of field data acquired in the Maciço Calcário Estremenho (Portugal) shows the practical importance of the pole–dipole array in cavities prospecting.