Spatial variation of the intertidal sediments and macrozoo-benthic assemblages along Eighty-mile Beach, North-western Australia

The extensive intertidal flats along Eighty-mile Beach in North-western Australia appear to be monotonous and homogeneous and seem ideally suited to study tidal zonation in macrozoo-benthic communities and their possible correlates with characteristics of the sediment. In October 1999, we sampled benthic invertebrates and sediments at a total of 895 sampling stations distributed over six different locations, each location separated by 15 km of unsampled foreshore along Eighty-mile Beach. To test for the presence or absence of patterns of tidal zonation (distinct height-related zones of specific sediment grain sizes or zoobenthic taxonomic groups) or patchiness (distinct patches of specific sediment grain sizes or zoobenthic taxonomic groups not related to tidal height) each location was divided into three along-shore sections and each section (transect) was examined at two or three tidal heights. Zonation was observed for sediment grain sizes. Sediments were coarser at the highest intertidal level and finer towards the low water line. Benthic assemblages also differed among tidal heights, but in terms of species-composition the differences were not consistent among the locations. Each location supported a unique collection of benthic invertebrates. Therefore the hypothesis of the presence of distinct zones of specific species or zoobenthic taxonomic groups was rejected; the presence of benthic patches was confirmed. The distribution of sediments and the composition of benthic assemblages were surprisingly poorly correlated compared to those reported in 12 previous quantitative studies around the world. One possible explanation might be that super-cyclone Vance, which hit the study-area only six months before this study, contributed to this poor correlation. Alternatively, the poor correlation may indicate that biotic interactions are more important than the assumed abiotic structuring.     

Th sorption and export models in the water column: A review

Over the past few decades, the radioisotope pair of ²³⁸U / ²³⁴Th has been widely and increasingly used to describe particle dynamics and particle export fluxes in a variety of aquatic systems. The present paper is one of five review articles dedicated to ²³⁴Th. It is focused on the models associated with ²³⁴Th whereas the companion papers (same issue) are focused on present and future methodologies and techniques (Rutgers van der Loeff et al.), C / ²³⁴Th ratios (Buesseler et al.), ²³⁴Th speciation (Santschi et al.) and present and future applications of ²³⁴Th [Waples, J.T., Benitez-Nelson, C.R., Savoye, N., Rutgers van der Loeff, M., Baskaran, M., Gustafsson, Ö., this issue. An Introduction to the application and future use of ²³⁴Th in aquatic systems. Marine Chemistry, FATE special issue]. In this paper, we review current ²³⁴Th scavenging models and discuss the relative importance of the non-steady state and physical terms associated with the most commonly used model to estimate ²³⁴Th flux. Based on this discussion we recommend that for future work the use of models should be accompanied by a discussion of the effect that model and data uncertainty have on the model results. We also suggest that future field work incorporate repeat occupations of sample sites on time scales of 1–4 weeks in order to evaluate steady state versus non-steady state estimates of ²³⁴Th export, especially during high flux events (> ca. 800 dpm m^− 2 d^− 1). Finally, knowledge of the physical oceanography of the study area is essential, particularly in ocean margins and in areas of established upwelling (e.g., Equatorial Pacific). These suggestions will greatly enhance the application of ²³⁴Th as a tracer of particle dynamics and flux in more complicated regimes.     

Propagation of the Southwest Indian Ridge at the Rodrigues Triple Junction

The analysis of multibeam bathymetric data of the Southwest Indian Ridge(SWIR) domain between the triple junction traces from 68° E to theRodrigues Triple Junction (RTJ; 70° E) reveals the evolution of thisridge since magnetic anomaly 4 (8 Ma). Image processing has been used toshow that the horizontal component of strain due to a network of normal stepfaults increases dramatically between 69°30 E and the RTJ. Thisarea close to the RTJ is characterized by a deep graben at the foot of thetriple junction trace on the African plate and by a narrow fault-boundedridge that joins an offset of the trace on the Antarctic plate. In thatarea, spreading is primarily amagmatic and dominated by tectonic extensionprocesses. To the west of 69°30 E, some lobate bathymetricfeatures atop of a large topographic high suggest volcanic constructions.Between 68°10 E and 69°25 E the southern flank of theSWIR domain is wider than the northern one and is characterized by a series of 7 en echelon bathymetric highs similar in size,shape and orientation to the one centred at 69°30E near the present-day triple junction. Their en echelon organization along the triple junction trace on the Antarctic plate and the typical lack of conjugated parts on the northern flank show that these bathymetric highs have been shifted to the south by successive northward relocalisations of the SWIR rifting zone. This evolution results in the asymmetric spreading of the SWIR in the survey area. The off-axis bathymetric highs connect to the offsets of the triple junction trace on the Antarctic plate when the Southeast Indian Ridges lightly lengthenstoward the northwest and the triple junction is relocated to the north. We propose that the SWIR lengthens toward the northeast with two propagation modes: 1) a continuous and progressive propagation with distributed deformation in preexisting crust of the Central Indian Ridge, 2) a discontinuous propagation with focusing of the deformation in a rift zone when the triple junction migrates rapidly to the north. The modes of propagation of the SWIR are related to different localisation and distribution of strain which are in turn controlled by changes of the triple junction configurations due to propagation, recession or a symmetric spreading on the Central and Southeast Indian Ridges.     

Fluid sources for the La Guitarra epithermal deposit (Temascaltepec district, Mexico): Volatile and helium isotope analyses in fluid inclusions

The La Guitarra deposit (Temascaltepec district, South-Central Mexico), belongs to the low/intermediate sulfidation epithermal type, has a polymetallic character although it is currently being mined for Ag and Au. The mineralization shows a polyphasic character and formed through several stages and sub-stages (named I, IIA, IIB, IIC, IID, and III). The previous structural, mineralogical, fluid inclusion and stable isotope studies were used to constrain the selection of samples for volatile and helium isotope analyses portrayed in this study. The N₂/Ar overall range obtained from analytical runs on fluid inclusion volatiles, by means of Quadrupole Mass Spectrometry (QMS), is 0 to 2526, and it ranges 0 to 2526 for stage I, 0 to 1264 for stage IIA, 0 to 1369 for stage IIB, 11 to 2401 for stage IIC, 19 to 324 for stage IID, and 0 to 2526 for stage III. These values, combined with the CO₂/CH₄ ratios, and N₂-He-Ar and N₂-CH₄-Ar relationships, suggest the occurrence of fluids from magmatic, crustal, and shallow meteoric sources in the forming epithermal vein deposit. The helium isotope analyses, obtained by means of Noble Gas Mass Spectrometry, display R/Ra average values between 0.5 and 2, pointing to the occurrence of mantle-derived helium that was relatively diluted or “contaminated” by crustal helium. These volatile analyses, when correlated with the stable isotope data from previous works and He isotope data, show the same distribution of data concerning sources for mineralizing fluids, especially those corresponding to magmatic and crustal sources. Thus, the overall geochemical data from mineralizing fluids are revealed as intrinsically consistent when compared to each other.The three main sources for mineralizing fluids (magmatic, and both deep and shallow meteoric fluids) are accountable at any scale, from stages of mineralization down to specific mineral associations. The volatile and helium isotope data obtained in this paper suggest that the precious metal-bearing mineral associations formed after hydrothermal pulses of predominantly oxidized magmatic fluids, and thus it is likely that precious metals were carried by fluids with such origin. Minerals from base-metal sulfide associations record both crustal and magmatic sources for mineralizing fluids, thus suggesting that base metals could be derived from deep leaching of crustal rocks. At the La Guitarra epithermal deposit there is no evidence for an evolution of mineralizing fluids towards any dominant source. Rather than that, volatile analyses in fluid inclusions suggest that this deposit formed as a pulsing hydrothermal system where each pulse or set of pulses accounts for different compositions of mineralizing fluids.The positive correlation between the relative content of magmatic fluids (high N₂/Ar ratios) and H₂S suggests that the necessary sulfur to carry mostly gold as bisulfide complexes came essentially from magmatic sources. Chlorine necessary to carry silver and base metals was found to be abundant in inclusion fluids and although there is no evidence about its source, it is plausible that it may come from magmatic sources as well.     

Mantle plumes from top to bottom

Hotspots include midplate features like Hawaii and on-axis features like Iceland. Mantle plumes are a well-posed hypothesis for their formation. Starting plume heads provide an explanation of brief episodes of flood basalts, mafic intrusions, and radial dike swarms. Yet the essence of the hypothesis hides deep in the mantle. Tests independent of surface geology and geochemistry to date have been at best tantalizing. It is productive to bare the current ignorance, rather than to dump the plume hypothesis. One finds potentially fruitful lines of inquiry using simple dynamics and observations. Ancient lithospheric xenoliths may reveal heating by plumes and subsequent thermal equilibration in the past. The effect at the base of the chemical layer is modest 50-100 K for transient heating by plume heads. Thinning of nonbuoyant platform lithosphere is readily observed but not directly attributable to plumes. The plume history in Antarctica is ill constrained because of poor geological exposure. This locality provides a worst case on what is known about surface evidence of hotspots. Direct detection of plume tail conduits in the mid-mantle is now at the edge of seismic resolution. Seismology does not provide adequate resolution of the deep mantle. We do not know the extent of a chemically dense dregs layer or whether superplume regions are cooler or hotter than an adiabat in equilibrium with the asthenosphere. Overall, mid-mantle seismology is most likely to give definitive results as plume conduits are the guts of the dynamic hypothesis. Finding them would bring unresolved deep and shallow processes into place.     

Fault zone geometry of a mature active normal fault: A potential high permeability channel (Pirgaki fault, Corinth rift, Greece)

We present results from petrophysical analysis of a normal fault zone with the aim of defining the flow pathways and their behavior during seismic and interseismic periods. Data are obtained on porosity geometry, strain structure and mineralogy of different domains of a normal fault zone in the Corinth rift. Data point out a close relationship between mineralogy of the clayey minerals, porosity network and strain structures and allow definition of a macroscopic anisotropy of the flow parameters with a strong control by microscopic ultracataclasite structures. The Pirgaki fault zone, developed within pelagic limestone, has a sharp asymmetric porosity profile, with a high porosity volume in the fault core and in the damage zone of the hanging wall. From porosity volumes and threshold measurements, a matrix permeability variation of 6 orders of magnitude could be expected between the protolith and the fault core. Modifications of this pathway during seismic and interseismic phases are depicted. Healing of cracks formed during seismic slip events occurred in the fault core zone and the porous network in the damage zone is sealed in a second step. The lens geometry of the fault core zone is associated with dissolution surfaces and open conduits where dissolved matter could move out of the fault core zone. These elementary processes are developed in particular along Riedel's structures and depend on the orientation of the strain surfaces relative to the local stress and depend also on the roughness of each surface type. P-surfaces are smooth and control shearing process. R-surfaces are rough and present two wavelengths of roughness. The long one controls localization of dissolution surfaces and conduits; the short one is characteristic of dissolution surfaces. The dissolved matter can precipitate in the open structures of the hanging wall damage zone, decreasing the connectivity of the macroscopic conduit developed within this part of the fault zone.     

Les failles récentes des Grands-Moulins (Savoie) : un Sackung (tassement gravitaire) majeur dans les Alpes françaises

In Savoy, the Grands-Moulins recent fault scarps, previously interpreted as seismic fault ruptures, are in fact part of a major Sackung (deep seated gravitational spreading) of the French Alps (9 km long). We mapped more than 60 sackung scarps, some of them reaching 1330 m long and 30 m high. These antislope scarps stop the active screes and offset relict Dryassic rock glaciers by 16 m. We present geomorphologic observations attesting for their gravitational origin. This Sackung is primarily due to glacial debuttressing, while seismic shaking could be a triggering mechanism. To cite this article: J.-C. Hippolyte et al., C. R. Geoscience 338 (2006).     

The effects of hazard zone information on judgements about earthquake damage

This study investigates the extent to which people's views on the causes and preventability of earthquake damage might be influenced by their degree of exposure to hazard as well as what information they have been given about the hazard. The results show that the provision of hazard zoning information influences judgements on preventability and causes of damage, but this effect depends on the degree of hazard faced by residents. In low hazard zones, information leads to the view that causes are manageable, whereas in high hazard zones information may induce a degree of fatalism. The use of public information in risk management needs to take into account the degree of risk faced by the recipients.     

A multidisciplinary multi-scale framework for assessing vulnerabilities to global change

Terrestrial ecosystems provide a number of vital services for people and society, such as food, fibre, water resources, carbon sequestration, and recreation. The future capability of ecosystems to provide these services is determined by changes in socio-economic factors, land use, atmospheric composition, and climate. Most impact assessments do not quantify the vulnerability of ecosystems and ecosystem services under such environmental change. They cannot answer important policy-relevant questions such as 'Which are the main regions or sectors that are most vulnerable to global change?’ 'How do the vulnerabilities of two regions compare?’ 'Which scenario is the least harmful for a sector?’This paper describes a new approach to vulnerability assessment developed by the Advanced Terrestrial Ecosystem Analysis and Modelling (ATEAM) project. Different ecosystem models, covering biodiversity, agriculture, forestry, hydrology, and carbon sequestration are fed with the same Intergovernmental Panel on Climate Change (IPCC) scenarios based on the Special Report on Emissions Scenarios (SRES). Each model gives insights into specific ecosystems, as in traditional impact assessments. Moreover, by integrating the results in a vulnerability assessment, the policy-relevant questions listed above can also be addressed. A statistically derived European environmental stratification forms a key element in the vulnerability assessment. By linking it to other quantitative environmental stratifications, comparisons can be made using data from different assessments and spatial scales.     

A Note On Surface Humidity Measurements In The Cold Canadian Environment

In the cold Canadian environment, humidity measurements can be verydifficult to conduct. In this brief communication, humidity observationstaken by two different sensors at six remote Canadian Arctic locations arecompared. The observations collected by Vaisala HMP35CF sensors displaya strong tendency toward the ice saturation point whereas dew cell instrumentsexhibit significantly lower values of relative humidity with respect to ice (RH_i).Humidity data collected by HMP35CF hygrometers are therefore unreliable sincethey are subject to persistent icing that lead them to record values of RH_i near 100%, irrespective of the air temperature. The high humidity bias emerges atmeteorological stations mounted with the HMP35CF probes since these instrumentsare usually neither sheltered nor heated, and are not attended to at regular intervals. Thus, great care must be taken in utilizing humidity data recorded by HMP35CF sensors across the network of climate autostations in Canada.