The extent of desertification on Saudi Arabia

Desertification is the process that turns productive deserts into non-productive deserts as a result of poor land-management. Desertification reduces the ability of land to support life, affecting wild species, domestic animals, agricultural crops and humans. The reduction in plant cover that accompanies desertification leads to accelerated soil erosion by wind and water. South Africa is losing approximately 300–400 million tons of topsoil every year. As vegetation cover and soil layer are reduced, rain fall impact and run-off increases. This paper discusses the extent of desertification, its potential threat to sustained irrigated agriculture and possible measures adopted to control ongoing desertification processes to minimize the loss of agricultural productivity in an arid country such as the Kingdom of Saudi Arabia.     

Extremely slow slope movements influencing the stability of Spis Castle,UNESCO site

Spis Castle, a monument included in the UNESCO World Heritage Site list (Eastern Slovakia) is built on a travertine mound overlying soft Paleogene rocks. Lateral spreading resulting from the subsidence of strong upper travertine into soft claystone strata has fractured and separated the castle rock into several cliffs. The differential movement of individual cliff faces is the primary influence on the stability of the monument. In order to monitor and quantify the movement, two techniques were adopted: a mechanical-optical TM-71 crack gauge and a demec gauge (demountable mechanical—SOMET type crack gauge). This paper presents the results and interpretation of medium and short-term monitoring at the site.     

A comparison of the GIS based landslide susceptibility assessment methods: multivariate versus bivariate

The purpose of this study is to evaluate and to compare the results of multivariate (logical regression) and bivariate (landslide susceptibility) methods in Geographical Information System (GIS) based landslide susceptibility assessment procedures. In order to achieve this goal the Asarsuyu catchment in NW Turkey was selected as a test zone because of its well-known landslide occurrences interfering with the E-5 highway mountain pass.Two methods were applied to the test zone and two separate susceptibility maps were produced. Following this a two-fold comparison scheme was implemented. Both methods were compared by the Seed Cell Area Indexes (SCAI) and by the spatial locations of the resultant susceptibility pixels.It was found that both of the methods converge in 80% of the area; however, the weighting algorithm in the bivariate technique (landslide susceptibility method) had some severe deficiencies, as the resultant hazard classes in overweighed areas did not converge with the factual landslide inventory map. The result of the multivariate technique (logical regression) was more sensitive to the different local features of the test zone and it resulted in more accurate and homogeneous susceptibility maps.     

Structural changes and valence states in the MgCr<Subscript>2</Subscript>O<Subscript>4</Subscript>–FeCr<Subscript>2</Subscript>O<Subscript>4</Subscript> solid solution series

The influence on the structure of Fe²⁺ Mg substitution was studied in synthetic single crystals belonging to the MgCr₂O₄–FeCr₂O₄ series produced by flux growth at 900–1200 °C in controlled atmosphere. Samples were analyzed by single-crystal X-ray diffraction, electron microprobe analyses, optical absorption-, infrared- and Mössbauer spectroscopy. The Mössbauer data show that iron occurs almost exclusively as ^IVFe²⁺. Only minor Fe³⁺ (<0.005 apfu) was observed in samples with very low total Fe. Optical absorption spectra show that chromium with few exceptions is present as a trivalent cation at the octahedral site. Additional absorption bands attributable to Cr²⁺ and Cr³⁺ at the tetrahedral site are evident in spectra of end-member magnesiochromite and solid-solution crystals with low ferrous contents. Structural parameters a₀, u and T–O increase with chromite content, while the M–O bond distance remains nearly constant, with an average value equal to 1.995(1) Å corresponding to the Cr³⁺ octahedral bond distance. The ideal trend between cell parameter, T–O bond length and Fe²⁺ content (apfu) is described by the following linear relations: a₀=8.3325(5) + 0.0443(8)Fe²⁺ (Å) and T–O=1.9645(6) + 0.033(1)Fe²⁺ (Å) Consequently, Fe²⁺ and Mg tetrahedral bond lengths are equal to 1.998(1) Å and 1.965(1) Å, respectively.     

Granulometric and chemical composition of the Sava River sediments upstream and downstream of the Krsko nuclear power plant

Total concentrations of 13 elements (K, Ca, Ti, Cr, Mn, Fe, Cu, Zn, Rb, Sr, Y, Zr, Pb) in the size-fractionated Sava River sediments upstream and downstream of the Krsko nuclear power plant together with metal speciation within bulk sediment have been investigated. Trace metals generally increase with decreasing particle size, however, because of entrapment of organic matter in the 0.63–1 mm fraction, concentrations in the coarser sediment fraction are higher than expected. Exchangeable Pb, Zn, Cu, Mn, Cr and Fe are generally found to represent a negligible fraction of the total metal concentration of the bulk sediment. Seasonal variations of the Pb, Zn and Cu concentrations in the <0.5 mm fraction reflect decreased values during the spring period. Heavy metal concentrations in the 2003 waste water discharges from the Krsko nuclear power plant released into the Sava River were much lower than their maximum allowed values. Combined rubidium and organic matter normalization of the Zn, Pb and Cu concentrations, which was applied on the minus 0.063 mm fraction, indicated three potential sources of contaminants.     

Characteristics of rapid giant landslides in China

Factual data for 70 rapid, giant landslides since 1900 show that the occurrence of these landslides was largely predisposed by tectonics, geological structures, lithology and topography, and often triggered by rainfall and earthquakes. In terms of mobile behavior, the giant landslides can be classified into three types: slides, slide-flows and flows. It is found that each type of landslide was constrained to certain geologic and topographic regimes. There are good correlations between kinematic parameters of landslides and slope geometries, which confirm the important role played by topographical condition in the mobile behavior of landslides. Moreover, it is also found that each type of landslide presents distinct geotechnical characteristics in terms of nature of the slip zone and properties of sliding mass. Brief analyses of five typical cases illustrate that landslide mechanisms can be conceptually depicted by failure mechanisms of their slip zones prior to onset of movement and following energy conversion during movement. Problems and questions related to experience in China suggest that comprehensive and systematic investigation and study on rapid giant landslides are urgently needed.     

Evolution of geochemistry and depositional settings of Early Palaeozoic siliciclastics of the Barrandian (Teplá-Barrandian Unit,Bohemian Massif,Czech Republic)

Cambrian and Ordovician-Middle Devonian sequences of two successive Early Palaeozoic basins of the Barrandian unconformably overlie Cadomian basement in the Bohemian Massif NW interior (Teplá-Barrandian unit) which is the easternmost peri-Gondwanan remnant within the Variscides. Correlation of stratigraphy and geochemistry of the Early Palaeozoic siliciclastic rocks elucidated sediment provenances. Sandstones of the Middle Cambrian Píbram-Jince Basin were derived from a Cadomian Neoproterozoic island arc. The source area of the Ordovician shallow-marine siliciclastics of the successor Prague Basin is a dissected Cadomian orogen. Late Cambrian acid volcanics of the Barrandian and Cambrian (meta)granitoids emplaced in the W part of the Teplá-Barrandian Cadomian basement are also discernible in these sediments. Old sedimentary component increased during the Ordovician. Early Llandovery siliciclastic rocks show characteristics of an abruptly weakened supply of terrigenous material and an elevated proportion of synsedimentary basic volcanics as a result of Silurian transgression. Emsian siliciclastics (intercalated in the Late Silurian to Early Devonian limestone suite) presumably comprise an addition of coeval basic/ultrabasic volcaniclastics. Middle Devonian flysch-like siliciclastics indicate reappearance of Cadomian source near the Barrandian during early Variscan convergences of Armorican microplates that preceeded accretion of the Teplá-Barrandian unit within the Bohemian Massif terrane mosaic.Dr. Patoka deceased in July 2004.     

Carbon isotope stratigraphy of Lochkovian to Eifelian limestones from the Devonian of central and southern Europe

Lower to Middle Devonian carbonates of the Prague Syncline, the Carnic Alps, the Montagne Noire, and the Cantabrian Mountains were investigated for δ¹³C_carb and δ¹³C_org. These values were measured on bulk rocks, selected components and cements. Many carbonates exhibit primary marine values, but some are altered by diagenesis. A δ¹³C curve can be presented for the latest Pridolian to Emsian time interval. Several sharp or broad positive excursions are obvious in the woschmidti-postwoschmidti, sulcatus, kitabicus, Late serotinus, and kockelianus conodont zones. The excursion at the Silurian–Devonian boundary is known worldwide and therefore considered global in nature. Some of the others are described for the first time from central and southern Europe, and their global nature has to be verified by further investigations in other regions. Most excursions relate to and/or started during major regressions whereas sea-level highstands correspond to minimal δ¹³C values. Similar relationships between sea-level changes and δ¹³C have been observed from other early Palaeozoic intervals. The transgressive Chote? (?) and Ka?ák events are marked by positive isotope excursions, this type of combination is usually observed in late Palaeozoic to Cenozoic black shale events.