Ghaleh-khargushi rhyodacite and Gorid andesite from Iran: characterization,uses, and durability

Durability of building stones is an important issue in sustainable development. Crystallization of soluble salts is recognized as one of the most destructive weathering agents of building stones. For this reason, durability of Ghaleh-khargushi rhyodacite and Gorid andesite from Iran was investigated against sodium sulfate crystallization aging test. Petrographic and physico-mechanical properties and pore size distribution of these stones were examined before and after the aging test. The characteristics of the microcracks were quantified with fluorescence-impregnated thin sections. Durability and physico-mechanical characteristics of Ghaleh-khargushi rhyodacite are mainly influenced by preferentially oriented preexisting microcracks. Stress induced by salt crystallization led to the widening of preexisting microcracks in Ghaleh-khargushi rhyodacite, as confirmed by the pore size distributions before and after the aging test. The preexisting microcracks of Gorid andesite were attributed to the mechanical stress induced by contraction of lava during cooling. The number of transcrystalline microcracks was significantly increased after the aging test. The degree of plagioclase microcracking was proportional to its size. Durability of the studied stones depends on initial physico-mechanical properties, pore size distribution, and orientation of microcracks. Initial effective porosity is found to be a good indicator of the stones’ durability. Salt crystallization resulted in an increase in the effective porosity with a parallel decrease in the wave velocities. Surface microroughness parameters increased with the development of salt crystallization-induced microcracking. Gorid andesite showed higher quality and durability than Ghaleh-khargushi rhyodacite.     

Assessment of the acid drainage neutralization capacity and the toxic metals lixiviation of tailing from Guanajuato mining district,Mexico

In Mexico, many environmental problems are generated by large mining activities taking place in several mining districts. These mining activities produce great quantities of residues; large majorities of these have high sulfur content, which could generate acid drainage due to their interaction with the oxygen in the environment. The study area was located in the Mining District of Guanajuato, Mexico with abandoned tailings generated mainly by the gold and silver production. Two areas, called as Monte de San Nicolás (SN) and Peregrina (P) were selected for this study. The results study shows that there was no risk of production of acid drainage, since these tailings contained high amount of carbonates, which neutralized the generation of acidity and consequently decreased the possibility of leaching of some elements. However, not all elements leach in acid pH, as arsenic bound to oxyhydroxides, which is in a basic environment and its increased release by increasing the pH.     

Bioerosion and encrustation rates in recent mollusk death assemblages on a supratidal siliciclastic setting,Playa Norte,Veracruz State,Mexico

This study presents both qualitative and quantitative data regarding marine mollusk (gastropods and bivalves) shell bioerosion and encrustation based on death assemblages obtained from a recent supratidal environment in Playa Norte, Veracruz State. The objectives of this study were to assess the nature of bioerosion and encrustation processes and to investigate the role of these taphonomic features contributing to the deterioration of natural shell accumulations within a tropical siliciclastic tidal environment. The assemblage comprises 31 species: 13 gastropods and 18 bivalves. The bioerosion and encrustation degrees were low to moderate for both types. The most abundant traces were predatory gastropod structures (Oichnus paraboloides and O. simplex), whereas sponge borings (Entobia isp.), polychaete dwellings (Caulostrepsis taeniola), and echinoid raspings (Gnatichnus isp.) were less frequent. The encrusting organisms include polychaete serpulids, bryozoans, and rare foraminifers (Homotrema rubrum). Because of the low bioerosion and encrustation degrees occurring in this area, accumulation is expected to predominate over biotic destruction. As deposition conditions (richly fossiliferous carbonate sandstone beds) were similar to those prevailing in the Tuxpan Formation during the Miocene (Langhian), it is suggested that this study provides an equivalent reference to interpret mollusk fossil assemblages located in this site.     

Carbon and nitrogen isotope,and mineral inclusion studies on the diamonds from the Pozanti–Karsanti chromitite,Turkey

The Pozanti–Karsanti ophiolite (PKO) is one of the largest oceanic remnants in the Tauride belt, Turkey. Micro-diamonds were recovered from the podiform chromitites, and these diamonds were investigated based on morphology, color, cathodoluminescence, nitrogen content, carbon and nitrogen isotopes, internal structure and inclusions. The diamonds recovered from the PKO are mainly mixed-habit diamonds with sectors of different brightness under the cathodoluminescence images. The total δ¹³C range of the PKO diamonds varies between ??18.8 and ??28.4‰, with a principle δ¹³C mode at ??25‰. Nitrogen contents of the diamonds range from 7 to 541 ppm with a mean value of 171 ppm, and the δ¹⁵N values range from ??19.1 to 16.6‰, with a δ¹⁵N mode of ??9‰. Stacking faults and partial dislocations are commonly observed in the Transmission Electron Microscopy foils whereas inclusions are rather rare. Combinations of (Ca_0.81Mn_0.19)SiO₃, NiMnCo-alloy and nano-sized, quenched fluid phases were observed as inclusions in the PKO diamonds. We believe that the ¹³C-depleted carbon signature of the PKO diamonds derived from previously subducted crustal matter. These diamonds may have crystallized from C-saturated fluids in the asthenospheric mantle at depth below 250 km which were subsequently carried rapidly upward by asthenospheric melts.     

Experimental study of quartz inclusions in garnet at pressures up to 3.0 GPa: evaluating validity of the quartz-in-garnet inclusion elastic thermobarometer

Garnet crystals with quartz inclusions were hydrothermally crystallized from oxide starting materials in piston–cylinder apparatuses at pressures from 0.5 to 3 GPa and temperatures ranging from 700 to 800 °C to study how entrapment conditions affect remnant pressures of quartz inclusions used for quartz-in-garnet (QuiG) elastic thermobarometry. Systematic changes of the 128, 206 and 464 cm^?1 Raman band frequencies of quartz were used to determine pressures of quartz inclusions in garnet using Raman spectroscopy calibrations that describe the P–T dependencies of Raman band shifts for quartz under hydrostatic pressure. Within analytical uncertainties, inclusion pressures calculated for each of the three Raman band frequencies are equivalent, which suggests that non-hydrostatic stress effects caused by elastic anisotropy in quartz are smaller than measurement errors. The experimental quartz inclusions have pressures ranging from ??0.351 to 1.247 GPa that span the range of values observed for quartz inclusions in garnets from natural rocks. Quartz inclusion pressures were used to model P–T conditions at which the inclusions could have been trapped. The accuracy of QuiG thermobarometry was evaluated by considering the differences between pressures measured during experiments and pressures calculated using published equation of state parameters for quartz and garnet. Our experimental results demonstrate that Raman measurements performed at room temperature can be used without corrections to estimate garnet crystallization pressures. Calculated entrapment pressures for quartz inclusions in garnet are less than ~?10% different from pressures measured during the experiments. Because the method is simple to apply with reasonable accuracy, we expect widespread usage of QuiG thermobarometry to estimate crystallization conditions for garnet-bearing silicic rocks.     

An experimental study of Fe–Ni exchange between sulfide melt and olivine at upper mantle conditions: implications for mantle sulfide compositions and phase equilibria

The behavior of nickel in the Earth’s mantle is controlled by sulfide melt–olivine reaction. Prior to this study, experiments were carried out at low pressures with narrow range of Ni/Fe in sulfide melt. As the mantle becomes more reduced with depth, experiments at comparable conditions provide an assessment of the effect of pressure at low-oxygen fugacity conditions. In this study, we constrain the Fe–Ni composition of molten sulfide in the Earth’s upper mantle via sulfide melt–olivine reaction experiments at 2 GPa, 1200 and 1400 °C, with sulfide melt \(X_{{{\text{Ni}}}}^{{{\text{Sulfide}}}}=\frac{{{\text{Ni}}}}{{{\text{Ni}}+{\text{Fe}}}}\) (atomic ratio) ranging from 0 to 0.94. To verify the approach to equilibrium and to explore the effect of \({f_{{{\text{O}}_{\text{2}}}}}\) on Fe–Ni exchange between phases, four different suites of experiments were conducted, varying in their experimental geometry and initial composition. Effects of Ni secondary fluorescence on olivine analyses were corrected using the PENELOPE algorithm (Baró et al., Nucl Instrum Methods Phys Res B 100:31–46, 1995), “zero time” experiments, and measurements before and after dissolution of surrounding sulfides. Oxygen fugacities in the experiments, estimated from the measured O contents of sulfide melts and from the compositions of coexisting olivines, were 3.0?±?1.0 log units more reduced than the fayalite–magnetite-quartz (FMQ) buffer (suite 1, 2 and 3), and FMQ ??1 or more oxidized (suite 4). For the reduced (suites 1–3) experiments, Fe–Ni distribution coefficients \(K_{{\text{D}}}^{{}}=\frac{{(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}/X_{{{\text{Fe}}}}^{{{\text{sulfide}}}})}}{{(X_{{{\text{Ni}}}}^{{{\text{olivine}}}}/X_{{{\text{Fe}}}}^{{{\text{olivine}}}})}}\) are small, averaging 10.0?±?5.7, with little variation as a function of total Ni content. More oxidized experiments (suite 4) give larger values of K_D (21.1–25.2). Compared to previous determinations at 100 kPa, values of K_D from this study are chiefly lower, in large part owing to the more reduced conditions of the experiments. The observed difference does not seem attributable to differences in temperature and pressure between experimental studies. It may be related in part to the effects of metal/sulfur ratio in sulfide melt. Application of these results to the composition of molten sulfide in peridotite indicates that compositions are intermediate in composition (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.4–0.6) in the shallow mantle at 50 km, becomes more Ni rich with depth as the O content of the melt diminishes, reaching a maximum (0.6–0.7) at depths near 80–120 km, and then becomes more Fe rich in the deeper mantle where conditions are more reduced, approaching (\(X_{{{\text{Ni}}}}^{{{\text{sulfide}}}}\)?~?0.28)?>?140 km depth. Because Ni-rich sulfide in the shallow upper mantle melts at lower temperature than more Fe-rich compositions, mantle sulfide is likely molten in much of the deep continental lithosphere, including regions of diamond formation.     

Petrogenesis of low-δ<Superscript>18</Superscript>O quartz porphyry dykes,Koegel Fontein complex,South Africa

This paper investigates the origin of low-δ¹⁸O quartz porphyry dykes associated with the 144–133 Ma Koegel Fontein Igneous Complex, which was intruded during the initial phase of breakup of Africa and South America. The 25-km diameter Rietpoort Granite is the largest and youngest phase of activity, and is roofed by a 10-km diameter pendant of gneiss. Quartz porphyry (QP) dykes, up to 15 m in width, strike NW–SE across the complex. The QP dykes that intruded outside the granite have similar quartz phenocryst δ¹⁸O values (average 8.0‰, ± 0.7, n?=?33) to the granite (average 8.3?±?1.0, n?=?7). The QP dykes that intruded the roof pendant have quartz phenocrysts with more variable δ¹⁸O values (average 1.6‰, ± 2.1, n?=?55). In some cases quartz phenocrysts have δ¹⁸O values as low as ? 2.5‰. The variation in δ¹⁸O value within the quartz crystal population of individual dykes is small relative to the overall range, and core and rim material from individual quartz phenocrysts in three samples are identical within error. There is no evidence that quartz phenocryst δ¹⁸O values have been affected by fluid–rock interaction. Based on a ?_quartz?magma value of 0.6‰, magma δ¹⁸O values must have been as low as ? 3.1‰. Samples collected along the length of the two main QP dykes that traverse the roof pendant have quartz phenocryst δ¹⁸O values that range from +?1.1 to +?4.6‰, and ? 2.3 to +?5.6‰, respectively. These δ¹⁸O values correlate negatively (r = ? 0.96) with initial ⁸⁷Sr/⁸⁶Sr, which can be explained by the event that lowered δ¹⁸O values of the source being older than the dykes. We suggest that the QP dykes were fed by magma produced by partial melting of gneiss, which had been variably altered at high temperature by ¹⁸O-depleted meteoric water during global glaciation at ~?550 Ma. The early melts had variable δ¹⁸O value but as melt pockets interconnected during melting, the δ¹⁸O values approached that of average gneiss. Variable quartz phenocryst δ¹⁸O values in the same dyke can be explained by vertical emplacement, at variable rates of ascent along the dyke. The lateral variation in quartz, and hence magma δ¹⁸O value at a particular point along a single dyke would depend on the rate of ascent of magma at that point along the dyke, and the ‘age’ of the particular magma batch.     

Textural and micro-analytical insights into mafic–felsic interactions during the Oruanui eruption,Taupo

Quenched juvenile mafic inclusions (enclaves) are an occasional but informative component in the deposits of large felsic eruptions. Typically, the groundmasses of these inclusions rapidly crystallize as the mafic magma is chilled against a more voluminous, cooler felsic host, providing a physical and chemical record of the nature and timing of mafic–felsic interactions. We examine mafic inclusions of two compositional lineages (tholeiitic and calc-alkaline) from deposits of the 25.4 ka Oruanui eruption (Taupo, New Zealand). 2-D quantitative textural data from analysis of back-scattered electron images reveal a marked diversity in the groundmass textures of the inclusions, including median crystal sizes (amphibole: 14–45 µm; plagioclase: 21–75 µm) and aspect ratios (amphibole: 1.7–4.2; plagioclase: 2.1–4.0), area number densities (amphibole: 122–2660 mm^?2; plagioclase: 117–2990 mm^?2), area fractions (?) of minerals (?_plag?=?23–45%, ?_amph?=?0–28%, ?_cpx?=?0–6%, ?_oxides?=?0.6–5.5%), and the relative abundance of plagioclase and amphibole (?_plag/?_amph?=?1.0–4.6). Textural parameters vary more significantly within, rather than between, the two compositional lineages, and in some cases show marked variations across individual clasts, implying that each inclusion’s cooling history, rather than bulk composition, was the dominant control on textural development. Groundmass mineral compositions are also diverse both within and between inclusions (e.g. plagioclase from An_34–92, with typical intra-clast variability of ~?20 mol%), and do not correlate with bulk chemistry. Diverse groundmass textures and mineral and glass chemistries are inferred to reflect complex interplay of a range of factors including the degree and rate of undercooling, bulk composition, water content and, possibly, intensive variables. Our data are inconsistent with breakup of a crystallizing ponded mafic layer at the base of the Oruanui melt-dominant body, instead implying that each inclusion partially crystallized as a discrete body with a unique cooling history. Extensive ingestion of mush-derived macro-crystals suggests that mechanical breakup of mafic feeder dikes occurred within a transition zone between the mush and melt-dominant magma body. In this zone, the mush lacked yield strength, as has been inferred from field studies of narrow (meters to few tens of meters) mush-melt transition zones preserved in composite intrusions. Evidence for plastic deformation of inclusions during eruption and the abundance of fresh residual glass in inclusions from all eruptive phases suggest that the inclusions formed syn-eruptively, and must have been formed recurrently at multiple stages throughout the eruption.     

Composition of barian mica in multiphase solid inclusions from orogenic garnet peridotites as evidence of mantle metasomatism in a subduction zone setting

Multiphase solid inclusions in minerals formed at ultra-high-pressure (UHP) provide evidence for the presence of fluids during deep subduction. This study focuses on barian mica, which is a common phase in multiphase solid inclusions enclosed in garnet from mantle-derived UHP garnet peridotites in the Saxothuringian basement of the northern Bohemian Massif. The documented compositional variability and substitution trends provide constraints on crystallization medium of the barian mica and allow making inferences on its source. Barian mica in the multiphase solid inclusions belongs to trioctahedral micas and represents a solid solution of phlogopite KMg₃(Si₃Al)O₁₀(OH)₂, kinoshitalite BaMg₃(Al₂Si₂)O₁₀(OH)₂ and ferrokinoshitalite BaFe₃(Al₂Si₂)O₁₀(OH)₂. In addition to Ba (0.24–0.67 apfu), mica is significantly enriched in Mg (X_Mg ~ 0.85 to 0.95), Cr (0.03–0.43 apfu) and Cl (0.04–0.34 apfu). The substitution vector involving Ba in the I-site which describes the observed chemical variability can be expressed as BaFe^IVAlClK_?1Mg_?1Si_?1(OH)_?1. A minor amount of Cr and ^VIAl enters octahedral sites following a substitution vector ^VI(Cr,Al)₂□^VI(Mg,Fe)_?3 towards chromphyllite and muscovite. As demonstrated by variable Ba and Cl contents positively correlating with Fe, barian mica composition is partly controlled by its crystal structure. Textural evidence shows that barian mica, together with other minerals in multiphase solid inclusions, crystallized from fluids trapped during garnet growth. The unusual chemical composition of mica reflects the mixing of two distinct sources: (1) an internal source, i.e. the host peridotite and its garnet, providing Mg, Fe, Al, Cr, and (2) an external source, represented by crustal-derived subduction-zone fluids supplying Ba, K and Cl. At UHP–UHT conditions recorded by the associated diamond-bearing metasediments (c. 1100 °C and 4.5 GPa) located above the second critical point in the pelitic system, the produced subduction-zone fluids transporting the elements into the overlying mantle wedge had a solute-rich composition with properties of a hydrous melt. The occurrence of barian mica with a specific chemistry in barium-poor mantle rocks demonstrates the importance of its thorough chemical characterization.