Slope instabilities triggered by the 11th May 2011 Lorca earthquake (Murcia,Spain): comparison to previous hazard assessments and proposition of a new hazard map and probability of failure equation

The Lorca Basin has been the object of recent research aimed at studying the phenomena of earthquake-induced landslides and its assessment in the frame of different seismic scenarios. However, it has not been until the 11th May 2011 Lorca earthquakes when it has been possible to conduct a systematic approach to the problem. In this paper we present an inventory of slope instabilities triggered by the Lorca earthquakes which comprises more than 100 cases, mainly rock and soil falls of small size (1–100  \(\hbox {m}^{3}\) ). The distribution of these instabilities is here compared to two different earthquake-triggered landslide hazard maps: one considering the occurrence of the most probable earthquake for a 475-years return period in the Lorca Basin \((\hbox {M}_{\mathrm{w}}=5.0)\) based on both low- and high-resolution digital elevation model (DEM); and a second one matching the occurrence of the \(\hbox {M}_{\mathrm{w}}=5.2\) 2011 Lorca earthquake, which was performed using the higher resolution DEM. The most frequent Newmark displacements related to the slope failures triggered by the 2011 Lorca earthquakes are lower than 2 cm in both the hazard scenarios considered. Additionally, the predicted Newmark displacements were correlated to the inventory of slope instabilities to develop a probability of failure equation. The fit seems to be very good since most of the mapped slope failures are located on the higher probability areas. The probability of slope failure in the Lorca Basin for a seismic event similar to the \(\hbox {M}_{\mathrm{w}}\) 5.2 2011 Lorca earthquake can be considered as very low (0–4 %).     

Local site effect microzonation of Lorca town (SE Spain)

Local site effect assessment based on subsurface ground conditions is often the key to evaluate urban seismic hazard. The site effect evaluation in Lorca town (south-eastern Spain) started with a classification of urban geology through the geological mapping at scale 1:10,000 and the use of geotechnical data and geophysical surveys. The 17 geological formations identified were classified into 5 geological/seismic formations according to their seismic amplification capacity obtained from ambient vibration measurements as well as from simultaneous strong motion records. The shear-wave velocity structure of each geological/seismic formation was evaluated by means of inversion of Rayleigh wave dispersion data obtained from vertical-component array records of ambient noise. Nakamura’s method was applied to determine a predominant period distribution map. The spectral amplification factors were fourfold the values recorded in a reference hard-rock site. Finally, the capability of this study for explaining the damage distribution caused by the May 11th, 2011 Lorca destructive earthquake (Mw \(=\) 5.2) was examined. The methods used in this work are of assistance to evaluate ground amplification phenomena in urban areas of complex geology as Lorca town due to future earthquakes with applicability on urban seismic risk management.     

Petrogenesis of the mafic igneous rocks of the Betic Cordilleras: A field, petrological and geochemical study

Mafic igneous rocks are widespread in the Nevado-Filábride Complex, the lowermost metamorphic unit of the internal zones of the Betic Cordilleras. They form intrusive, small, discontinuous bodies, predominantly dikes with subordinate small lava flows. The entire complex underwent alpine compressional metamorphism during the Paleogene continental collision, resulting in eclogites and blueschists in the mafic bodies and high-pressure assemblages in the intruded metasediments. Locally, weakly metamorphosed or completely unmetamorphosed igneous rocks with the same textural features occur as patches surrounded by eclogitized igneous rocks. The bulk rock chemistry of unmetamorphosed and completely metamorphosed mafic igneous rocks is consistent with an alkaline to transitional tholeiitic magmatism with typical within-plate geochemical characteristics. All but a few samples are nepheline normative and display REE and trace element characteristics typical of continental, rift-related magmatism. This conclusion is strongly supported by the mineral chemistry of the major constituents, in particular the calcic Ti-rich character of clinopyroxene, the lack of orthopyroxene, and the occurrence of kaersutitic amphibole. Incompatible trace element abundances and Sr and Nd isotopes support the provenance of these magmas from a variably metasomatized previously depleted sub-continental lithospheric mantle source. Received: 5 July 1999 / Accepted: 28 February 2000     

A thermo‐mechanical model for variably saturated soils based on hypoplasticity

The paper presents a mechanical model for non‐isothermal behaviour of unsaturated soils. The model is based on an incrementally non‐linear hypoplastic model for saturated clays and can therefore tackle the non‐linear behaviour of overconsolidated soils. A hypoplastic model for non‐isothermal behaviour of saturated soils was developed and combined with the existing hypoplastic model for unsaturated soils based on the effective stress principle. Features of the soil behaviour that are included into the model, and those that are not, are clearly distinguished. The number of model parameters is kept to a minimum, and they all have a clear physical interpretation, to facilitate the model usefulness for practical applications. The step‐by‐step procedure used for the parameter calibration is described. The model is finally evaluated using a comprehensive set of experimental data for the thermo‐mechanical behaviour of an unsaturated compacted silt. Copyright © 2011 John Wiley & Sons, Ltd.     

Complex site effects and building codes: Making the leap

The engineering community is aware of the importance of site effects, but it lags behind seismological studies when it comes to incorporating site effect considerations in design spectra for seismic norms. This lag is reflected in the conspicuous fact that current building codes make allowance for 1D site effects but ignore complex site effects. The purpose of this paper is to explore a way for including complex site effects in a building code environment. We take as example Eurocode 8, which is a modern code that exemplifies the current approach to site effect consideration. We examine the restrictions that we have imposed to make the problem of a feasible size and discuss the approach we have taken. We propose a strategy to incorporate a class of complex site effects in a design elastic spectrum.     

Morphosedimentary features and recent depositional architectural model of the Cantabrian continental margin

Multibeam bathymetry, high (sleeve airguns) and very high resolution (parametric system-TOPAS-) seismic records were used to define the morphosedimentary features and investigate the depositional architecture of the Cantabrian continental margin. The outer shelf (down to 180–245 m water depth) displays an intensively eroded seafloor surface that truncates consolidated ancient folded and fractured deposits. Recent deposits are only locally present as lowstand shelf-margin deposits and a transparent drape with bedforms. The continental slope is affected by sedimentary processes that have combined to create the morphosedimentary features seen today. The upper (down to 2000 m water depth) and lower (down to 3700–4600 m water depth) slopes are mostly subject to different types of slope failures, such as slides, mass-transport deposits (a mix of slumping and mass-flows), and turbidity currents. The upper slope is also subject to the action of bottom currents (the Mediterranean Water — MW) that interact with the Le Danois Bank favouring the reworking of the sediment and the sculpting of a contourite system. The continental rise is a bypass region of debris flows and turbidity currents where a complex channel-lobe transition zone (CLTZ) of the Cap Ferret Fan develops.The recent architecture depositional model is complex and results from the remaining structural template and the great variability of interconnected sedimentary systems and processes. This margin can be considered as starved due to the great sediment evacuation over a relatively steep entire depositional profile. Sediment is eroded mostly from the Cantabrian and also the Pyrenees mountains (source) and transported by small stream/river mountains to the sea. It bypasses the continental shelf and when sediment arrives at the slope it is transported through a major submarine drainage system (large submarine valleys and mass-movement processes) down to the continental rise and adjacent Biscay Abyssal Plain (sink). Factors controlling this architecture are tectonism and sediment source/dispersal, which are closely interrelated, whereas sea-level changes and oceanography have played a minor role (on a long-term scale).     

Sediment bioavailable organic matter,deposition rates and mixing intensity in the Setúbal–Lisbon canyon and adjacent slope (Western Iberian Margin)

The role of the Setúbal–Lisbon canyon in accumulation and transport of labile organic matter from the coastal sea and ocean surface water towards the deep sea was assessed by investigating the distribution of organic matter of different quality in sedimentary aggregates and surface sediments of the canyon and adjacent slopes. Total hydrolysable amino acids (THAA) and organic carbon (Corg) were measured from aggregates, and contents of Corg, chlorophyll a (chl a), phaeopigments (phaeo), chloroplastic pigment equivalents (CPE) from sediments. As indices of organic matter (OM) quality THAA:Corg, degradation index (DI), chl a:phaeo, chl a:Corg and C:N ratio were determined. Sediment profiles of chl a and the isotope 210 of lead (²¹⁰Pb) were used as tracers in a transport model to estimate deposition rates and background levels of the tracers, and sediment mixing rates (Db). Whereas bulk Corg contents of canyon and slope sediments were practically similar at all depths, higher contents of THAA, chl a and CPE, as well as higher THAA:Corg, DI and chl a:Corg, in aggregates and sediments from the upper reaches of the canyon indicate that labile organic matter accumulates in the upper canyon. This is confirmed by higher chl a and ²¹⁰Pb deposition and Db calculated from the model. Hence, the Setúbal–Lisbon canyon, specially the upper region, acts as a natural trap of organic matter that is transported to the region via lateral transport and vertical settling from primary productivity. Organic matter might be further transported in downward canyon direction via rebound processes. The chl a and ²¹⁰Pb profiles reveal active sediment mixing by physical processes and/or animal reworking.     

Land use and topography as predictors of nutrient levels in a tropical catchment

The influence of landscape on nutrient concentration and yield was analyzed in a tropical catchment, the Guare River in northern Venezuela. Spatial and temporal variation in nitrate, SRP and total P were determined in 15 sites located along the river mainstem and tributaries. Higher nitrate concentrations and yields were reported from upper sites and both decreased in the downstream direction along the river mainstem. These trends appear to be related to more pronounced slopes and larger proportions of agricultural and forest lands in subcatchments located in the upper part of the basin, and dense algal mats in the lower reaches. Nitrate values were higher during periods of high discharge, suggesting that nitrate is primarily transported by shallow subsurface flow. SRP represented between 60 and 80% of total P. Phosphorus concentrations were homogeneous along the river mainstem and showed little seasonal variation, while yields were higher in the upper basin. Multiple regression identified slope, runoff and agriculture as primary predictors of nitrate and phosphorus across the watershed, which suggests that both natural and anthropogenic landscape characteristics have a strong influence on nutrient levels in the Guare catchment.     

The sauropod diversity of the La Amarga Formation (Barremian), Neuquén (Argentina)

A study of the abundant and undescribed isolated and associated bones and teeth from the La Amarga Formation (Barremian of Neuquén, Argentina) permitted the recognition of additional clades of sauropod dinosaurs: basal titanosauriforms, both basal and derived titanosaurs, and rebbachisauroid diplodocoids, which are now added to the already known dicraeosaurids and a recently published basal diplodocoid. These forms substantially increase the knowledge on the Early Cretaceous sauropod diversity in Gondwana.