�������й�����������ͨ������λ�Ʒ�������ģ��

?????????????????????????????й?????????????????У?????FLAC??3D???????????????????λ?????????????????????????λ??????????????ɡ??о?????????????й???????????????????ж???????λ???????????λ????????????????λ?ò???????????й????λ????????????????????λ?????????????????й???λ??????????????????????????????????     

Dynamic response of an offshore pile to pseudo-Stoneley waves along the interface between a poroelastic seabed and seawater

A coupled model is developed to investigate the dynamic interaction between an offshore pile, a porous seabed and seawater when subjected to the pseudo-Stoneley wave along the seabed and the seawater interface. The pile and the seabed are treated as the porous medium governed by Biot's theory, while the seawater is considered as an acoustic medium and is described by the conventional Helmholtz equation. The free field solution of the incident pseudo-Stoneley wave is obtained using Biot's theory and the potential method. Based on the boundary element method (BEM) for the porous medium and the acoustic medium, three BEM formulations are constructed for the pile, the seabed and the seawater, respectively, which are combined together using the continuity conditions between the pile, the seabed and the seawater to formulate the coupled model for the system. As shown in numerical examples, when the system is subjected to the pseudo-Stoneley wave, the maximum pore pressure of the seabed usually occurs at the region near the interfaces between the seabed and the seawater.     

Fusion of high-resolution DEMs derived from COSMO-SkyMed and TerraSAR-X InSAR datasets

Voids caused by shadow, layover, and decorrelation usually occur in digital elevation models (DEMs) of mountainous areas that are derived from interferometric synthetic aperture radar (InSAR) datasets. The presence of voids degrades the quality and usability of the DEMs. Thus, void removal is considered as an integral part of the DEM production using InSAR data. The fusion of multiple DEMs has been widely recognized as a promising way for the void removal. Because the vertical accuracy of multiple DEMs can be different, the selection of optimum weights becomes a key problem in the fusion and is studied in this article. As a showcase, two high-resolution InSAR DEMs near Mt. Qilian in northwest China are created and then merged. The two pairs of InSAR data were acquired by TerraSAR-X from an ascending orbit and COSMO-SkyMed from a descending orbit. A maximum likelihood fusion scheme with the weights optimally determined by the height of ambiguity and the variance of phase noise is adopted to syncretize the two DEMs in our study. The fused DEM has a fine spatial resolution of 10 m and depicts the landform of the study area well. The percentage of void cells in the fused DEM is only 0.13 %, while 6.9 and 5.7 % of the cells in the COSMO-SkyMed DEM and the TerraSAR-X DEM are originally voids. Using the ICESat/GLAS elevation data and the Chinese national DEM of scale 1:50,000 as references, we evaluate vertical accuracy levels of the fused DEM as well as the original InSAR DEMs. The results show that substantial improvements could be achieved by DEM fusion after atmospheric phase screen removal. The quality of fused DEM can even meet the high-resolution terrain information (HRTI) standard.     

锆石中磷的分带趋势、成因及地质意义

本文用电子探针对岩浆和变质重结晶锆石进行了成份分带的研究，结果表明，变质重结晶锆石具有从晶体中心至边缘Ｐ２Ｏ５含量增大的特点，可作为它们的成因标型特征，岩浆锆石则Ｐ２Ｏ５含量变化不稳定，本文论述了它们的成因。     

青藏高原积雪的分布特征及其对地面反照率的影响

通过对１９８３年７月至１９９０年６月青藏高原主体５８个格点积雪资料进行ＥＯＦ分析发现，青藏高原主体积雪分布以西部兴都库什山脉。天山山脉以及南部喜马拉雅山脉为主；高原中部唐古拉山脉、北部昆仑山脉和东部巴颜喀拉山脉的积雪相对较少，青藏高原西部、南部的积雪变化与中部、北部和东部的积雪变化趋势存在反位相关系。另外，本文还对积雪对高原地面反照率的影响作了简单分析。     

Club convergence and spatial distribution dynamics of carbon intensity in China’s construction industry

Climate change caused by carbon emissions continuously threatens sustainable development. Due to China’s immense territory, there are remarkable regional differences in carbon emissions. The construction industry, which has strong internal industrial differences, further leads to carbon emission disparity in China. Policymakers should consider spatial effects and attempt to eliminate carbon emission inequality to promote the sustainable development of the construction industry and realize emission reduction targets. Based on the classic Markov chain and spatial Markov chain, this paper investigates the club convergence and spatial distribution dynamics of China’s carbon intensity in the construction industry from 2005 to 2014. The results show that the provincial carbon intensity in the construction industry is characterized by “convergence clubs” during the research period, and very low-level and very high-level convergence clubs have strong stability. Moreover, the carbon intensity class transitions of provinces tend to be consistent with that of their neighbors. Furthermore, the transition of carbon intensity types is highly influenced by their regional backgrounds. The provinces with high carbon emissions have a negative influence on their neighbors, whereas the provinces with low carbon emissions have a positive influence. These analyses provide a spatial interpretation to the “club convergence” of carbon intensity.     

水下机动目标轨迹跟踪的自适应估计方法

研究了用GPS测定基阵坐标,分析了水听器基阵所接收到的声脉冲信号的处理。通过模拟和实测数据的试算,证明了本文提出的模型及方法不但能处理多系统含有粗差的观测值,而且具有良好的跟踪处理机动目标的性能。     

渗流井合理竖井降深确定

通过采用单位面积河流在单位水头差作用下的渗漏量来表征河流渗漏能力,建立渗流井取水理想模型,分别计算了在不同河流渗漏能力和含水层渗透性能条件下,竖井降深对渗流井出水量的影响.建立渗流井取水非稳定流模型,计算了在前期稳定竖井降深不同条件下,河流断流后渗流井出水量衰减过程及竖井降深发展过程.提出渗流井合理竖井降深应根据河流与地下水是否脱节以及含水层渗透性能,在岸边渗流井中部及一侧各布设一个观测孔,根据观测孔水位进行确定.对于含水层渗透性能较强地区,渗流井竖井降深应使得渗流井范围内地下水位与河流脱节,但高于辐射孔顶面;对于含水层渗透性能较差地区,渗流井竖井降深应使得侧部观测孔水位接近河床底面或刚出现脱节.     

Analysis of the spectral features of a recent supernova 1987n

We present an attempt to analyse the spectra of SN 1987n in NGC 7606, covering a period of 10 days from the time of maximum brightness. The velocities in the rest frame of NGC 7606 and the depths of the spectral lines at maximum light are very close to those of SN 1981b in NGC 4536, slight differences being nevertheless present. A distance to NGC 7606 of 46±11 Mpc for anH ₀ value of 50 km s^–1 Mpc^–1 is inferred from Pskovskii's relation.The analysis carried out within a standard simple model of spectral synthesis involves a high uncertainty in the abundance determinations for the intermediate-mass elements quoted. This uncertainty arises on the one hand from the free choice of the excitation temperature and from the sensitivity to changes in the excitation temperature of the depths of the strongest lines of those elements and, on the other hand, from the impossibility of obtaining within this model an estimate of other abundances — He, O, Na, S — which have NLTE populations.The analysis developed in a new model based (as is the standard one) on Sobolev's approximation but allowing for a more realistic continuum treatment points to an important attenuation effect on the radiation in the lines, due to the continuum scattering, which can also affect abundance determinations.     

Magnetic susceptibility and electrical conductivity as a proxy for evaluating soil contaminated with arsenic,cadmium and lead in a metallurgical area in the San Luis Potosi State,Mexico

A total of 113 samples of waste and soil were collected from a site in the state of San Luis Potosi, Mexico, that was occupied for several years by the metallurgical industry. Specific magnetic susceptibility (MS), electrical conductivity (EC) and pH were determined, as well as the total and available concentrations of potentially toxic elements (PTEs) such as As, Cd, Cu, Fe, Pb and Zn, which may cause a health risk for humans, animals and ecosystems, and the concentrations of major ions in aqueous extracts of soils and wastes. The solid phases of the samples were also characterized. The results revealed that the soils and wastes exhibited elevated values of PTEs, MS and EC. For soils these values decreased with increasing distance from the waste storage sites. The MS values were elevated primarily due to the presence of Fe-oxyhydroxides, such as magnetite, hematite and goethite, which contain PTEs in their structure leading to a high correlation between the value of MS and the As, Cd, Fe and Pb contents (r = 0.57–0.91) as well as between the PTEs values (r = 0.68–0.92). The elevated EC values measured in the metallurgical wastes were the result of presence of the sulfate minerals of Ca, Mg and Fe. The pollution index, which indicates the levels of simultaneous toxicity from elements such as As, Cd and Pb, was determined, with extreme hazard zones corresponding to areas that exhibit high MS values (0.91 correlation). In conclusion, MS measurements can be used as an indirect indicator to evaluate the PTE contamination in metallurgical areas, and EC measurements can aid in the identification of pollution sources.