Early Archean crustal evolution of the Jack Hills Zircon source terrane inferred from Lu-Hf, Pb/Pb, and δO systematics of Jack Hills zircons

Several lines of isotopic evidence - the most direct of which is from Hadean Jack Hills zircons - suggest a very early history of crust formation on Earth that began by about 4.5 Ga. To constrain both the fate of the reservoir for this crust and the nature of crustal evolution in the sediment source region of the Jack Hills, Western Australia, during the early Archean, we report here initial ¹⁷⁶Hf/¹⁷⁷Hf ratios and δ¹⁸O systematics for <4 Ga Jack Hills zircons. In contrast to the significant number of Hadean zircons which contain highly unradiogenic ¹⁷⁶Hf/¹⁷⁷Hf requiring a near-zero Lu/Hf reservoir to have separated from the Earth’s mantle by 4.5 Ga, Jack Hills zircons younger than ca. 3.6 Ga are more radiogenic than -13ε (CHUR) at 3.4 Ga in contrast to projected values at 3.4 Ga of -20ε for the unradiogenic Hadean reservoir indicating that some later juvenile addition to the crust is required to explain the more radiogenic younger zircons. The shift in the Lu-Hf systematics together with a narrow range of mostly mantle-like δ¹⁸O values among the <3.6 Ga zircons (in contrast to the spread towards sedimentary δ¹⁸O among Hadean samples) suggests a period of transition between 3.6 and 4 Ga in which the magmatic setting of zircon formation changed and the highly unradiogenic low Lu/Hf Hadean crust ceased to be available for intracrustal reworking. Constraining the nature of this transition provides important insights into the processes of crustal reworking and recycling of the Earth’s Hadean crust as well as early Archean crustal evolution.     

Statistical and hydrochemical methods to compare basalt- and basement rock-hosted groundwaters: Atherton Tablelands,north-eastern Australia

Multivariate analysis of physico-chemical and chemical data has enabled differentiation among groundwaters sourced from different lithological formations in the Atherton Tablelands region of north-eastern Australia. The main water resource is stored in basalt, although basement rocks such as granite and metamorphics also contain variable amounts of water. Groundwater in the basalt is mostly Mg-Ca-Na, HCO₃ type, with electrical conductivities less than 300 µS/cm and pH values from 6.5 to 8.5. Some of the other groundwater is quite similar, making the identification of hydrochemical facies difficult. Groundwater samples were grouped based on the results of a principal component factor analysis of the major dissolved constituents H₄SiO₄, Na⁺, Ca²⁺, Mg²⁺ and HCO₃^-, as well as pH and electrical conductivity. Based on this differentiation it was possible to identify the likely host rocks of groundwaters from unidentified lithological units, define the basalt thickness and provide a better understanding of the groundwater resource. Principal component factor analysis has also been useful in identifying the likely hydrochemical processes controlling the composition of these groundwaters, including the production of weak acids in the soil layers, silicate mineral weathering, ion-exchange reactions, evapotranspiration and the leaching of ions from organic matter. Supplementary material to this paper can be obtained by using the Springer LINK server located at http://dx.doi.org/10.1007/s00254-002-0667-z.     

A methodology to constrain the parameters of a hydrogeological discrete fracture network model for sparsely fractured crystalline rock,exemplified by data from the proposed high-level nuclear waste repository site at Forsmark,Sweden

The large-scale geological structure of the crystalline rock at the proposed high-level nuclear waste repository site at Forsmark, Sweden, has been classified in terms of deformation zones of elevated fracture frequency. The rock between deformation zones was divided into fracture domains according to fracture frequency. A methodology to constrain the geometric and hydraulic parameters that define a discrete fracture network (DFN) model for each fracture domain is presented. The methodology is based on flow logging and down-hole imaging in cored boreholes in combination with DFN realizations, fracture connectivity analysis and pumping test simulations. The simulations suggest that a good match could be obtained for a power law size distribution where the value of the location parameter equals the borehole radius but with different values for the shape parameter, depending on fracture domain and fracture set. Fractures around 10–100 m in size are the ones that typically form the connected network, giving inflows in the simulations. The report also addresses the issue of up-scaling of DFN properties to equivalent continuous porous medium (ECPM) bulk flow properties. Comparisons with double-packer injection tests provide confidence that the derived DFN formulation of detailed flows within individual fractures is also suited to simulating mean bulk flow properties and their spatial variability.     

A magnetotelluric study of the Alpine Fault, New Zealand

Magnetotelluric soundings have been made at seven locations on a 4  km profile crossing the Alpine Fault in the South Island of New Zealand. The 'distortion' techniques of Groom & Bailey (1989 ) and Lilley (1998a , b ) have been used to derive regional apparent resistivity and phase curves that correspond to electromagnetic induction in orientations parallel and perpendicular to the fault. 2-D inversion of the regional responses reveals that a narrow (<1  km wide) conductive zone is associated with the Alpine Fault. This conductor is most probably related to the heating of deep circulating meteoric water in a region in which enhanced temperatures occur at shallow depth due to the tectonic uplift of the Southern Alps.     

Regional effects of climate change on reindeer: a case study of the Muotkatunturi region in Finnish Lapland

Few studies have investigated current climate changes for high latitude regions, and the impact of such changes on reindeer and indigenous people. Previous work by other authors has identified snow and ice conditions in winter as being critical in determining the availability of forage for reindeer. Deep snow makes it difficult to access food. Lack of food weakens the herd and can reduce the allocation of nutrients to the development of the foetus in the female deer. Climate data for Lapland, northern Finland, and Karasjok, northern Norway, are examined, together with reindeer calf numbers for the period 1977 to 1994 for the Muotkatunturi region (68°N 25°30'E). Between 1883 and 1993, precipitation increased but temperatures showed no clear warming or cooling trend. However, since the late 1980s, temperatures have increased. A regression analysis on the climate and reindeer data found that the warmer the winter prior to the rut, the fewer the live calves recorded the following year (r = 0.529, p < 0.05). Also, the wetter the winter prior to the rut, the fewer the calves recorded (r = 0.427, p < 0.10). In contrast, the warmer the autumn prior to their birth, the greater the number of calves recorded (r = 0.474, p < 0.10). These results suggest that as climate changes and winters become warmer and wetter with increased snowfall, calf numbers will decline. These findings have important implications for the Saami people who are heavily dependent on the reindeer for their livelihood.     

Stratigraphic development of an Upper Jurassic deep marine syn‐rift succession,Inner Moray Firth Basin,Scotland

The stratigraphic development of an Upper Jurassic syn‐rift succession exposed at outcrop in the Inner Moray Firth Basin has been investigated using high‐resolution biostratigraphy and sedimentology. A continuous 970 m thick section, exposed in the hangingwall of the Helmsdale Fault was logged in detail. The succession spans 8 Ma and contains eight lithofacies types, which indicate deposition in a deep marine setting. Boulder beds contain large, angular clasts, with bed thicknesses typically >2 m and poor sorting suggesting deposition by debris flows. An inverse clast stratigraphy is observed; the oldest boulder beds contain sandstone clasts of Upper Old Red Sandstone (ORS) with younger debris flows containing clasts of Middle ORS calcareous siltstone. A marked change from siliciclastic to carbonate dominated sedimentation occurred during the Early Tithonian, interpreted primarily as a result of change in lithologies in the footwall catchment from sandstone to calcareous siltstone, which reduced supply of siliciclastic sediment. Secondary factors are identified as increased aridity in the Early Tithonian, which reduced sand supply from the hinterland and a third‐order Early Tithonian eustatic sea‐level rise, which trapped coarser clastic sediment within the hinterland. Biostratigraphy allows calculation of variations in sedimentation rates with recognition of: (1) an early rift phase characterised by sandy turbidite deposition, when sedimentation rates averaged 0.08 m/ky, (2) a rift climax phase from the Early Kimmeridgian where sedimentation rates increased steadily to a maximum of 0.64 m/ky in the Early Tithonian, with strata dominated by boulder scale clast‐supported debris flows and (3) a late stage of rifting from the mid Tithonian, where sedimentation rates decreased to 0.07 m/ky. Overall sedimentation rates are comparable to those of other deep marine rift basins. Unroofing a resistant lithology on the footwall of a rift has important implications for siliciclastic sediment supply in rift basins.     

Caledonian foreland basin sedimentation: A new depositional model for the Upper Silurian‐Lower Devonian Lower Old Red Sandstone of the Midland Valley Basin,Scotland

Reconstruction of the geological history of orogenic events can be challenging where basins have limited and/or fragmentary preservation. Here, we apply understanding gained from modern analogues to the sedimentological analysis of the succession of Upper Silurian to Lower Devonian Lower Old Red Sandstone (LORS), northern Midland Valley, Scotland, in order to reconstruct the foreland to the Caledonian orogeny. A new depositional model is presented which differs significantly from current understanding. Using facies analysis, grain size distribution and palaeocurrent data a large distributive fluvial system is reconstructed. Three lithofacies and nine sublithofacies are identified, forming fluvial channel and floodplain facies associations. The system was derived from an emerging mountain range in the Caledonian foreland undergoing constant tectonic rejuvenation to produce 9 km of coarse‐grained sediment, exhibiting an overall decrease in thickness towards the west and a large‐scale downstream reduction in grain size. Conglomerate sublithofacies dominate proximal areas in the east where amalgamated fluvial channel facies association is abundant, with a downstream increase in the dominance of floodplain facies. Additionally, observed grain size cyclicity is attributed to a pulsatory tectonic influence. The LORS records the time‐period between the late phases of the Caledonian Orogeny and the onset of post‐orogenic collapse in the mid‐Devonian and the presented model allows improved understanding of the north‐Atlantic Caledonian foreland.     

The 3D facies architecture and petrophysical properties of hyaloclastite delta deposits: An integrated photogrammetry and petrophysical study from southern Iceland

Hyaloclastites develop where lava interacts with water resulting in deposits that have a unique and often complex range of petrophysical properties. A combination of eruptive style and emplacement environment dictates the size, geometry and distribution of different hyaloclastite facies and their associated primary physical properties such as porosity, permeability and velocity. To date, links between the 3D facies variability within these systems and their petrophysical properties remain poorly understood. Hjörleifshöfði in southern Iceland presents an exceptional outcrop exposure of an emergent hyaloclastite sequence >1 km wide by >200 m high and enables an investigation of the distribution of the hyaloclastite deposits at seismic scale. Within this study we present a photogrammetry-based 3D model from part of this recent hyaloclastite delta and incorporate previous work by Watton et al. (Journal of Volcanology and Geothermal Research, 2013, 250, 19) to undertake detailed facies interpretation and quantification. Laboratory petrophysical analyses were performed on 34 core plugs cut from key field facies samples, including P- and S-wave velocity, density, porosity and permeability at both ambient and confining pressure. Integration of the 3D model with the petrophysical data has enabled the production of pseudo-wireline logs and property distribution maps which demonstrate the variability of physical properties within hyaloclastite sequences at outcrop to seismic scale. Through comparison of our data with examples of older buried hyaloclastite sequences we demonstrate that the wide-ranging properties of young hyaloclastites become highly uniform in older sequences making their identification by remote geophysical methods for similar facies variations more challenging. Our study provides an improved understanding of the petrophysical property distribution within hyaloclastite sequences and forms a valuable step towards improving the understanding of similar subsurface sequences and their implications for imaging and fluid flow.     

Is laser particle size determination possible for carbonate-rich lake sediments?

This paper examines the potential of a relatively new technique – laser diffraction particle size analysis – for use with carbonate-rich lake sediments, material traditionally difficult to analyse. Three experiments are considered. The first two use a carbonate standard to determine optimal instrument conditions – the choice of optical model, and a suitable transport fluid. The third experiment uses sample material from lake cores and compares four different pre-treatment methods: none, removal of carbon by loss on ignition, removal of carbon by digestion with hydrogen peroxide, and finally removal of carbonates with hydrochloric acid and then removal of organic material by digestion with hydrogen peroxide. Only this final method produces repeatable results. As such, whilst the laser diffraction instrument offers improvements in the speed, required sample volume and repeatability of analysis, it does not overcome the problems inherent in the analysis of carbonates. Any catchment disturbance signal preserved in the carbonate fraction will remain undetected.