Application of the single point measurement in discharge estimation

The fluid flow system can be described by an equivalent electromagnetic system. In this paper a successful application of the Biot–Savart law in hydraulics is presented. Similarity between the magnetic field of a current wire and the isovel contours in a channel cross-section is used to derive the isovel patterns in an open or closed channel. Having obtained the normalized isovel contours, one can easily obtain the discharge using a single point of velocity measurement at the conduit cross-section. The estimated discharge, based on measured points and the predicted isovels on the upper half of the flow depth away from the boundaries was within ±5% of the measured and much better in comparison to the prediction of one- and two-point methods. Furthermore, the model was applied to real life channels. The prediction of the water surface velocity for the River Unon in Japan and depth-averaged velocity for the Severn River in UK show a good agreement with the measured data and analytical results.     

Les manifestations tectono-sédimentaires d'âge Campanien–Maastrichtien en Tunisie : implications sur l'évolution géodynamique de la marge Nord-AfricaineThe Campanian–Maastrichtian synsedimentary tectonic activity: implication in the geodynamic evolution of the North African Margin

The synsedimentary tectonic activity evidenced in central and northern Tunisia points out the fact that the Campanian–Maastrichtian deposits are associated with several NW–SE and east–west normal faults. These results suggest that the east–west transform fault of North African Margin is still active during this stage. These data allow us to discuss a new geodynamic model for the North African Margin. To cite this article: M. Dlala, C. R. Geoscience 334 (2002) 135–140.     

Attitude determination by integration of MEMS inertial sensors and GPS for autonomous agriculture applications

Integration of Global Positioning System (GPS) and Inertial Navigation System (INS) technologies, which has widespread usage in industry, is also regarded as an ideal solution for automated agriculture because it fulfils the accuracy, reliability and availability requirements of industrial and agricultural applications. Agriculture applications use position, velocity and heading information for automated vehicle guidance and control to enhance the yield and quality of the crop, and in order to vary the application of fertilizer and herbicides according to soil heterogeneity at sub-field level. A loosely coupled GPS/INS integration algorithm known as “AhrsKf” is introduced for automated agriculture vehicle guidance and control utilizing MEMS inertial sensors and GPS. The AhrsKf can produce high-frequency attitude solutions for the vehicle’s guidance and control system, by using inputs from a single survey grade L1/L2 antenna, eliminating the need for the previous two antenna solutions. Given its agricultural application, the AhrsKf has been implemented with some specific design features to improve the accuracy of the attitude solution including, temperature compensation of the inertial sensors, and the aid of plough lines of farm lands. To evaluate the AhrsKf solution, two benchmarking tests have been conducted by using a three-antenna GPS system and NovAtel’s SPAN-CPT. The results have demonstrated that the AhrsKf solution is stable and can correctly track the movement of the farming vehicle.     

Seismic performance of high-rise buildings in selected regions in Saudi Arabia according to different seismic codes

The design code for each country is revised and updated based on an expected zone’s seismic intensities,geotechnical site classifications,structural systems,construction materials and methods of construction in order to provide more realistic considerations of seismic demand,seismic response,and seismic capacity.Based on the aforementioned provisions,structures designed according to different seismic codes may yield different performances for the same level of hazard.This study aims to investigate and compare the induced responses related to the earthquake-resistant design of reinforced concrete(RC)buildings according to the Saudi building code(SBC-301),American code(ASCE-7),uniform building code(UBC-97),and European code(EC-8).In order to account for the provision regarding the hazard specification and its effect on the induced seismic responses,four regions in the Kingdom of Saudi Arabia with different seismic levels are selected.The code provisions related to the specification of site classification and its effect on the induced design base shear are investigated as well.Significant differences are observed in the induced responses with the variation in seismic design codes for the considered seismic hazards and site classifications.     

Physical properties of three short period close binaries:KIC 2715417,KIC 6050116 and KIC 6287172

We present the physical parameters of three short period close binaries using data observed from the Kepler Space Telescope. All of these observations were taken in a single bandpass(which approximates the Johnson V-band). Our three systems are KIC 2715417, KIC 6050116 and KIC 6287172. The first system, KIC 2715417, is considered a semi-detached system with the secondary component filling its Roche lobe. The second system, KIC 6050116, is an overcontact system, while the third system, KIC 6287172, belongs to ellipsoidal variables as deduced from the Roche lobe geometry. For photometric analysis, we used the PHOEBE software package, which is based on the Wilson-Devinney code. Due to lack of spectroscopic data, the photometric mass ratios are determined from the analyses of light curves using the q-search method. The absolute parameters are determined using three different methods(Harmanec, Maceroni Van'tVeer and Gazeas Niarchos).     

Geotectonic significance of the Neoproterozoic ophiolitic metagabbros of Muiswirab area,South Eastern Desert,Egypt: constraints from their mineralogical and geochemical characteristics

Acta Geochimica - Petrological and geochemical studies of Neoproterozoic metagabbros were carried out in the Muiswirab area, South Eastern Desert of Egypt. The Muiswirab area comprises of...     

Effect of electrode contact impedance on A.C. electrical properties of a wet hematite sample

Electrode polarization is a major problem in the determination of dielectric properties of samples, particularly at low frequencies. Understanding of these interfacial phenomena is essential in order to measure correctly the electrical properties of a sample of interest. This paper presents a comparative study of the effect of electrode contact impedance on A.C. electrical properties of a partially and fully saturated hematitic sandstone sample. The electrical properties of the sample were first measured using stainless steel electrodes with high contact impedance, and measured again with a four terminal Cu–CuSO₄ electrode of low contact impedance. Complex impedance measurements at room temperature (~16°C) were performed in the frequency range from 1 Hz to 100 kHz. Measured electrical spectra vary strongly with the electrode type. The difference in the electrical properties between the two electrode types (stainless steel and Cu–CuSO₄) may be attributed to the surface contact impedance between the sample and the electrode. Experimental data indicate that the electrical properties vary strongly with water saturation. The dielectric constant decreases with frequency and increases with saturation up to a certain saturation limit then decreases. Charge transport can occur either through the bulk of the solid matrix (hematite or sand) or along the grain boundaries of aggregates (water). When soil minerals are exposed to water, exchangeable ions go into solution. Most of the ionic or covalent bonded rock forming minerals such as quartz, mica, and feldspars are nonconductors. When the surfaces of these minerals come into contact with liquid water, electrolytes are formed and ionic drift associated with the electrical field causes electrical conduction. The anomalous dielectric properties of partially saturated rocks can be interpreted using percolation theory. This theory predicts that when the conductive fraction (water) increases, clustering of conductive inclusions develops, and the thickness of insulating gaps between conductive clusters decreases, causing a large increment in the capacitance of the sample. Further increases in the conductive component causes the shunting of insulating capacitive gaps.     

海洋工程试验池中风场模拟

在考虑海洋工程装备在极端海况和运行海况下的载荷与受力,风载荷也是一个不可忽视的因素.目前物理模型试验仍是研究海洋工程结构物载荷与运动性能的重要手段,而深海结构物在水平漂移运动较大,如何在较大范围内得到满足试验要求的风场,是提高试验能力的重要问题.应用数值计算方法对大范围的风场模拟进行了分析,并进行了相应的物理实验,在此基础上对海洋工程试验的风场模拟提出了若干建议.     

Vibration analysis of rectangular Mindlin plates on elastic foundations and vertically in contact with stationary fluid by the Ritz method

In this study Free vibration analysis of vertical rectangular Mindlin plates resting on Pasternak elastic foundation and fully or partially in contact with fluid on their one side is investigated for different combinations of boundary conditions. The plate is assumed to be one of vertical rectangular walls of a container in contact with fluid. In order to analyze the interaction of the Mindlin plate with the elastic foundation and fluid system, three displacement components of the plate are expressed in the Ritz method by adopting a set of static Timoshenko beam functions satisfying geometric boundary conditions in a Cartesian co-ordinate system. The method of separation of variables and the method of Fourier series expansion is used to model fluid and to obtain the exact expression of the motion of fluid in the form of integral equations. The fluid domain is finite in depth and width but infinite in the length direction. To demonstrate the accuracy of the present solution, convergence study is first carried out and then a few comparison studies are carried out with the available data in the literature. Finally, natural frequencies of rectangular plates are presented in tabular and graphical forms for different fluid levels, foundation parameters, aspect ratios, thickness to width ratios and boundary conditions.     

Very short-term behaviour of the flare star EV Lac

Sinusoidal variations in Johnson'sB-band of the flare star EV Lac have been confirmed at its quiet state luminosity. The cycle lengths are more than one hour and less than two hours with amplitudes varying from 0 _. ^m 105 to 0 _. ^m 306. These registered cycles have agreed with cycles detected by Mavridis and Varvoglis (1990) and Mavridis (1990). In the same time, the cycles have confirmed the light variation detection in Johnson'sV-band in the same flare star by Pettersen (1980) with a cyclic period equals about 4 _. ^d 378 and an amplitude of about 0 _. ^m 07. Our net results confirm, to some extent, the presence of active region(s) as an origin of stellar flare phenomenon of UV Ceti type flare stars. We can cautiously say that the solar and stellar flare phenomenon have a similar origin.