The ALOMAR Rayleigh/Mie/Raman lidar: objectives, configuration, and performance

We report on the development and current capabilities of the ALOMAR Rayleigh/Mie/Raman lidar. This instrument is one of the core instruments of the international ALOMAR facility, located near Andenes in Norway at 69°N and 16°E. The major task of the instrument is to perform advanced studies of the Arctic middle atmosphere over altitudes between about 15 to 90 km on a climatological basis. These studies address questions about the thermal structure of the Arctic middle atmosphere, the dynamical processes acting therein, and of aerosols in the form of stratospheric background aerosol, polar stratospheric clouds, noctilucent clouds, and injected aerosols of volcanic or anthropogenic origin. Furthermore, the lidar is meant to work together with other remote sensing instruments, both ground- and satellite-based, and with balloon- and rocket-borne instruments performing in situ observations. The instrument is basically a twin lidar, using two independent power lasers and two tiltable receiving telescopes. The power lasers are Nd:YAG lasers emitting at wavelengths 1064, 532, and 355 nm and producing 30 pulses per second each. The power lasers are highly stabilized in both their wavelengths and the directions of their laser beams. The laser beams are emitted into the atmosphere fully coaxial with the line-of-sight of the receiving telescopes. The latter use primary mirrors of 1.8 m diameter and are tiltable within 30° off zenith. Their fields-of-view have 180 rad angular diameter. Spectral separation, filtering, and detection of the received photons are made on an optical bench which carries, among a multitude of other optical components, three double Fabry-Perot interferometers (two for 532 and one for 355 nm) and one single Fabry-Perot interferometer (for 1064 nm). A number of separate detector channels also allow registration of photons which are produced by rotational-vibrational and rotational Raman scatter on N₂ and N₂+O₂ molecules, respectively. Currently, up to 36 detector channels simultaneously record the photons collected by the telescopes. The internal and external instrument operations are automated so that this very complex instrument can be operated by a single engineer. Currently the lidar is heavily used for measurements of temperature profiles, of cloud particle properties such as their altitude, particle densities and size distributions, and of stratospheric winds. Due to its very effective spectral and spatial filtering, the lidar has unique capabilities to work in full sunlight. Under these conditions it can measure temperatures up to 65 km altitude and determine particle size distributions of overhead noctilucent clouds. Due to its very high mechanical and optical stability, it can also employed efficiently under marginal weather conditions when data on the middle atmosphere can be collected only through small breaks in the tropospheric cloud layers.     

Stable Atmospheric Boundary-Layer Experiment in Spain (SABLES 98): A Report

This paper describes the Stable AtmosphericBoundary Layer Experiment in Spain (SABLES 98),which took place over the northern Spanish plateaucomprising relatively flat grassland,in September 1998. The main objectives of the campaign were to study the properties of themid-latitude stable boundary layer (SBL).Instrumentation deployed on two meteorologicalmasts (of heights 10 m and 100 m)included five sonic anemometers, 15 thermocouples,five cup anemometers and three propeller anemometers,humidity sensors and radiometers.A Sensitron mini-sodar and a tetheredballoon were also operated continuously. Atriangular array of cup anemometers wasinstalled to allow the detection ofwave events. Two nocturnal periods analysedon 14–15 and 20–21 September are used toillustrate the wide-ranging characteristics of the SBL.     

Colloid particle sizes in the Mississippi River and some of its tributaries,from Minneapolis to below New Orleans

An on-board technique was developed that combined discharge-weighted pumping to a high-speed continuous-flow centrifuge for isolation of the particulate-sized material with ultrafiltration for isolation of colloid-sized material. In order to address whether these processes changed the particle sizes during isolation, samples of particles in suspension were collected at various steps in the isolation process to evaluate changes in particle size. Particle sizes were determined using laser light-scattering photon correlation spectroscopy and indicated no change in size during the colloid isolation process. Mississippi River colloid particle sizes from twelve sites from Minneapolis to below New Orleans were compared with sizes from four tributaries and three seasons, and from predominantly autochthonous sources upstream to more allochthonous sources downstream. © 1998 John Wiley & Sons, Ltd.     

Numerical Coincidences and `Tuning' in Cosmology

Fred Hoyle famously drew attention to the significance of apparent coincidences in the energy levels of the carbon and oxygen nucleus. This paper addresses the possible implications of other coincidences in cosmology. This revised version was published online in August 2006 with corrections to the Cover Date.     

Responses of benthic macroinvertebrates to thin-layer disposal of dredged material in Mississippi Sound, USA

Benthic community responses to thin-layer disposal of dredged material were assessed at three sites in Mississippi Sound, USA. Community composition differed between disposal and reference sites (ANOSIM) for each disposal event. Oweniid sand worms, Amphinomid fire worms, and brittle stars (Ophiuriodea) contributed the most to community distinctions between disposal and reference sites (SIMPER), with higher abundances at the disposal sites. Total infaunal abundance was similar to pre-disposal and reference conditions within 3-10 months of thin-layer disposal. Distinctions in community composition between disposal and reference sites (nMDS) persisted throughout the 16-month study period, but were less pronounced at the site where sediment composition was unchanged by disposal. Size distributions of some taxa (e.g., gastropod and hemichordate) suggest adults recolonized the newly deposited sediments either through vertical migration or lateral immigration from adjacent areas. Thin-layer disposal offers a viable alternative to conventional open-water disposal practices and warrants further exploration for other areas with deeper bathymetries and different hydrodynamic regimes.     

The use of time-series data in the assessment of macrobenthic community change after the cessation of sewage-sludge disposal in Liverpool Bay (UK)

Sewage sludge was disposed of in Liverpool Bay for over 100 years. Annual amounts increased from 0.5 million tonnes per annum in 1900 to approximately 2 million tonnes per annum by 1995. Macrofauna and a suite of environmental variables were collected at a station adjacent to, and a reference station distant from, the disposal site over 13 years, spanning a pre- (1990-1998) and post- (1999-2003) cessation period. Univariate and multivariate analyses of the time-series data showed significant community differences between reference and disposal site stations and multivariate analyses revealed station-specific community development post-disposal. Temporal variability of communities collected at the disposal station post-cessation was higher than during years of disposal, when temporally stable dominance patterns of disturbance-tolerant species had established. Alterations of community structure post-disturbance reflected successional changes possibly driven by facilitation. Subtle faunistic changes at the Liverpool Bay disposal site indicate that the near-field effects of the disposal of sewage sludge were small and therefore could be considered environmentally acceptable.     

Pollution investigations off the north-east coast of England: Community structure,growth and production of Benthic Macrofauna

The growth of major polychaete and bivalve species inhabiting sandy sediments off the north-east coast of England was examined over a 1-year period in a comparative study of community production in relation to contaminant sources. Background information on site locations, sampling methods and benthic community structure is provided.The polychaetes Spiophanes bombyx, Magelona spp. and Nephtys spp. were major contributors to community biomass at most sites, either individually or collectively. Tellina fabula, Nucula turgida, Venus striatula and other bivalves were only sparsely represented at most sites and growth rates were generally lower than elsewhere. Reduced bivalve populations, together with the presence in high numbers of short-lived polychaete species, may be connected with the vulnerability of bottom sediments to disturbance by water movements in this coastal region.Recruitment patterns were generally similar between sites but showed marked annual variation, with a substantially greater bivalve settlement occurring at the end of the sampling period.Estimates of community production ranged from 3.4 to 7.4 g ash-free dry weight per square metre a year, and showed relatively high turnover rates compared with other regions, which, again, may be related to a greater degree of fluctuation in the physical environment. Production was highest at a site near to the Tees estuary and was accounted for mainly by the polychaetes Nephtys hombergi and Spiophanes bombyx. The concentration of biomass into one or two species may have consequences for the stability of the fauna. However, the results do not appear to indicate any serious effects of pollution, which may suggest that the coastal waters have sufficient capacity to effectively dilute and disperse any harmful constituents of present estuarine efflux.Limitations to the interpretation of field data using conventional methods of sampling and analysis are discussed, and the application of growth studies to investigations of water pollution is advocated.     

Neutron-loaded outflows in gamma-ray bursts

The force-free limit of magnetohydrodynamics (MHD) is often a reasonable approximation to model black hole and neutron star magnetospheres. We describe a general relativistic force-free (GRFFE) formulation that allows general relativistic magnetohydrodynamic (GRMHD) codes to directly evolve the GRFFE equations of motion. Established, accurate and well-tested conservative GRMHD codes can simply add a new inversion piece of code to their existing code, while continuing to use all the already-developed facilities present in their GRMHD code. We show how to enforce the   E · B = 0  constraint and energy conservation, and we introduce a simplified general model of the dissipation of the electric field to enforce the   B ²− E ² > 0  constraint. We also introduce a simplified yet general method to resolve current sheets, without much reconnection, over many dynamical times. This formulation is incorporated into an existing GRMHD code ( harm ), which is demonstrated to give accurate and robust GRFFE results for Minkowski and black hole space–times.