Summer temperature variability across four urban neighborhoods in Knoxville,Tennessee, USA

The urban heat island (UHI) is a well-documented effect of urbanization on local climate, identified by higher temperatures compared to surrounding areas, especially at night and during the warm season. The details of a UHI are city-specific, and microclimates may even exist within a given city. Thus, investigating the spatiotemporal variability of a city’s UHI is an ongoing and critical research need. We deploy ten weather stations across Knoxville, Tennessee, to analyze the city’s UHI and its differential impacts across urban neighborhoods: two each in four neighborhoods, one in more dense tree cover and one in less dense tree cover, and one each in downtown Knoxville and Ijams Nature Center that serve as control locations. Three months of temperature data (beginning 2 July 2014) are analyzed using paired-sample t tests and a three-way analysis of variance. Major findings include the following: (1) Within a given neighborhood, tree cover helps negate daytime heat (resulting in up to 1.19 ^°C lower maximum temperature), but does not have as large of an influence on minimum temperature; (2) largest temperature differences between neighborhoods occur during the day (0.38–1.16 ^°C difference), but larger differences between neighborhoods and the downtown control occur at night (1.04–1.88 ^°C difference); (3) presiding weather (i.e., air mass type) has a significant, consistent impact on the temperature in a given city, and lacks the differential impacts found at a larger-scale in previous studies; (4) distance from city center does not impact temperature as much as land use factors. This is a preliminary step towards informing local planning with a scientific understanding of how mitigation strategies may help minimize the UHI and reduce the effects of extreme weather on public health and well-being.     

Extreme midlatitude cyclones and their implications for precipitation and wind speed extremes in simulations of the Maunder Minimum versus present day conditions

Extreme midlatitude cyclone characteristics, precipitation, wind speed events, their inter-relationships, and the connection to large-scale atmospheric patterns are investigated in simulations of a prolonged cold period, known as the Maunder Minimum from 1640 to 1715 and compared with today. An ensemble of six simulations for the Maunder Minimum as well as a control simulation for perpetual 1990 conditions are carried out with a coupled atmosphere-ocean general circulation model, i.e., the Climate Community System Model (CCSM). The comparison of the simulations shows that in a climate state colder than today the occurrence of cyclones, the extreme events of precipitation and wind speed shift southward in all seasons in the North Atlantic and the North Pacific. The extremes of cyclone intensity increases significantly in winter in almost all regions, which is related to a stronger meridional temperature gradient and an increase in lower tropospheric baroclinicity. Extremes of cyclone intensity in subregions of the North Atlantic are related to extremes in precipitation and in wind speed during winter. Moreover, extremes of cyclone intensity are also connected to distinct large-scale atmospheric patterns for the different subregions, but these relationships vanish during summer. Analyzing the mean 1,000 hPa geopotential height change of the Maunder Minimum simulations compared with the control simulation, we find a similar pattern as the correlation pattern with the cyclone intensity index of the southern Europe cyclones. This illustrates that changes in the atmospheric high-frequency, i.e., the simulated southward shift of cyclones in the North Atlantic and the related increase of extreme precipitation and wind speed in particular in the Mediterranean in winter, are associated with large-scale atmospheric circulation changes.     

Radiative Processes in the Stable Boundary Layer: Part I. Radiative Aspects

The structure of the radiatively dominated stable boundary layer is analysed using idealized calculations at high vertical and spectral resolution. The temperature profile of a nocturnal radiative boundary layer, developing after the evening transition, is found to be well described in terms of radiative cooling to the surface, although radiative exchanges within the atmosphere become increasingly important with time. The treatment of non-black surfaces is discussed in some detail and it is shown that the effect of reducing the surface emissivity is to decrease rather than to increase the radiative cooling rate in the surface layer. It is also argued that an accurate assessment of the impact of non-black surfaces requires careful attention to the spectral and directional characteristics of the surface emissivity. A polar nocturnal boundary layer, developing above snow-covered ground, is simulated and found to reach a slowly evolving state characterized by a strong radiative divergence near the surface that is comparable to observed values. Radiative boundary layers are characterized by large temperature gradients near the surface. An erratum to this article can be found at     

Some developments of the magnetic beam absorption filter

In the present paper some experimental arrangements are shown which utilize the magnetic filter described by Cimino et al. (1968). For a single cell we have elaborated an elementary theory in the following cases: (i) absorption by an atomic beam in a uniform magnetic field (i.e. pure damping profile); (ii) atomic beam in a non-uniform magnetic field; (iii) vapours in a uniform magnetic field (i.e. gaussian distribution); (iv) vapours in a non-uniform magnetic field.     

MODELING HEADCUT DEVELOPMENT AND MIGRATION IN UPLAND CONCENTRATED FLOWS

On hillslopes and agricultural fields, discrete areas of intense, localized soil erosion commonly take place in the form of migrating headcuts. These erosional features significantly increase soil loss and landscape degradation, yet the unsteady, transient, and migratory habits of headcuts complicate their phenomenological and erosional characterization. Here a unique experimental facility was constructed to examine actively migrating headcuts typical of upland concentrated flows. Essential components of the facility include a deep soil cavity with external drainage, rainfall simulator, capacity for overland flow, and a video recording technique for data collection. Results from these experiments show that： （1） after a short period of adjustment, headcut migration attained a steady-state condition, where the rate of migration, scour hole geometry, and sediment discharge remain constant with time; （2） boundary conditions of higher rates of overland flow, steeper bed slopes, and larger initial headcut heights produced systematically larger scour holes with higher rates of soil erosion; and （3） during migration, the turbulent flow structure within the scour hole remained unchanged, consisting of an overfall nappe at the brink transitioning into a reattached wall jet with two recirculation eddies within the plunge pool. The systematic behavior of headcut development and migration enabled the application of modified jet impingement theory to predict with good success the characteristics of the impinging jet, the depth of maximum scour, the rate of headcut migration, and the rate of sediment erosion. These laboratory data and the analytical formulation can be used in conjunction with soil erosion prediction technology to improve the management of agricultural areas impacted by headcut development and ephemeral gully erosion.     

Statistics of low frequency currents over the western Norwegian shelf and slope II: Model

We examine velocity statistics from a numerical simulation of the Nordic Seas with 4 km resolution, with a focus on the Norwegian shelf and slope. The model mean flow is dominated by its version of the Norwegian Atlantic Current, with two branches, one near the shelfbreak and the other near the 2000 m isobath. The model variances are surface-intensified and increase with water depth over the shelf; the variance ellipses also indicate topographic steering. Seasonality is more pronounced on the shelf than on the slope and the velocity probability distributions are weakly non-Gaussian, reflecting an excess of extreme velocities. All these aspects are broadly consistent with the observations. There are, however, differences with the observations. The topographic steering of the mean flow and of the variance ellipses is less pronounced in the model, a probable consequence of the model bathymetry, etopo5, being too smooth. The temporal and spatial coherence scales are too large by about a factor of 2, probably due to the model resolution. And correlations between velocity time series from the model and in situ moorings are generally small, despite the model having realistic forcing. The low predictability presumably reflects the degree of chaos in the flow and highlights the need for data assimilation.     

Hydrochemical and Multivariate Statistical Evaluation of Heavy Metals in Shallow Alluvial Aquifers of North Brahmaputra Plain,India

The aim of this study was to display distribution and relationships of heavy elements in the unconfined, shallow alluvial aquifers of the lower Jia Bharali catchment and adjoining areas in central part of North Brahmaputra Plain (NBP), India using hydrochemical as well as multivariate statistical techniques such as principal component analysis (PCA) and cluster analysis. The original matrix was made up of 10 trace elements (As, Cd, Cu, Co, Cr, Fe, Mn, Pb, Ni and Zn) estimated from 50 shallow alluvial dug wells in both the wet and the dry season for a duration of 3 hydrological years (2008–2011). Except As, Cu and Zn all the other toxic metals in the shallow aquifers were found exceeding the WHO maximum permissible limits for drinking water. PCA extracted five varimax factors as geogenic, agricultural and anthropogenic explaining about 71.2% of the total variance in the wet season and 69.3% total variance in the dry season. Hierarchical cluster analysis classified the dug wells into two groups in the wet season and three groups in the dry season with respect to the heavy elements. The results emphasized the need for routine monitoring and management in order to avoid contamination of groundwater sources in the NBP with respect to the dissolved trace elements.     

Spectroscopic Characterization of Organic Structures and Organic‐Inorganic Interactions in Paper Mill Sludge

The organic composition and organic‐inorganic interaction in paper mill sludge (PS) solvent extracts (hexane, ethyl acetate, acetone and ethanol) and humic fractions, humic acid (HA) and humin (HU) were studied by electron paramagnetic resonance spectroscopy (EPR), proton and carbon‐13 nuclear magnetic resonance spectroscopy (¹H NMR; ¹³C NMR), Fourier‐transformed infrared spectroscopy (FTIR), and ultraviolet‐visible spectroscopy (UV‐vis). The strategy of fractionating the PS, sequentially, with organic solvents of increasing polarity is a reliable analytical procedure for humic substance sample separation because it results in more purified fractions. FTIR, ¹H NMR and ¹³C NMR results showed that hexane extract consisted mainly of aliphatic hydrocarbon structures. Their contents in the extracts decreased as the polarity of the extracting solvent increased and the content of oxygen functional groups increased. Carboxylic and carboxylate functional groups were found in the acetone extract, and ester and ether functions were predominantly found in the ethanol extract. EPR spectra revealed some Fe³⁺ complexes with rhombic structure (g₁ = 4.3; g₂ = 9.0) in the humic fractions and in all solvent extracts, except hexane. Quasi‐octahedral Fe³⁺ complexes (g = 2.3; ΔH_pp ≤ 400 G) were found in the HU fraction and in the acetone extract. The organic free radical content in the HA fraction was higher than the non‐fractionated PS sample and HU fraction.