Imbalance in the carbonate budget of surficial sediments in the North Atlantic Ocean: variations over the last millenium?

Fluxes contributing to the particulate carbonate system in deep-sea sediments were investigated at the BENGAL site in the Porcupine Abyssal Plain (Northeast Atlantic). Deposition fluxes were estimated using sediment traps at a nominal depth of 3000 m and amounted to 0.37±0.1 mmol C m⁻² d⁻¹. Dissolution of carbonate was determined using flux of total alkalinity from in situ benthic chambers, is 0.4±0.1 mmol C m⁻² d⁻¹. Burial of carbonate was calculated from data on the carbonate content of the sediment and sedimentation rates from a model age based on ¹⁴C dating on foraminifera (0.66±0.1 mmol C m⁻² d⁻¹). Burial plus dissolution was three times larger than particle deposition flux which indicates that steady-state is not achieved in these sediments. Mass balances for other components (BSi, ²¹⁰Pb), and calculations of the focusing factor using ²³⁰Th, show that lateral inputs play only a minor role in this imbalance. Decadal variations of annual particle fluxes are also within the uncertainty of our average. Long-term change in dissolution may contribute to the imbalance, but can not be the main reason because burial alone is greater than the input flux. The observed imbalance is thus the consequence of a large change of carbonate input flux which has occured in the recent past. A box model is used to check the response time of the solid carbonate system in these sediments and the time to reach a new steady-state is in the order of 3 kyr. Thus it is likely that the system has been perturbed recently and that large dissolution and burial rates reflect the previously larger particulate carbonate deposition rates. We estimate that particulate carbonate fluxes have certainly decreased by a factor of at least 3 and that this change has occurred during the last few centuries.     

“Basin scale” versus “localized” pore pressure/stress coupling - Implications for trap integrity evaluation

In petroleum industry, the difference between pore pressure (P_p) and minimum horizontal stress S_h (termed the seal or retention capacity) is of major consideration because it is often assumed to represent how close a system is to hydraulic failure and thus the maximum hydrocarbon column height that can be maintained. While S_h and P_p are often considered to be independent parameters, several studies in the last decade have demonstrated that S_h and P_p are in fact coupled. However, the nature of this coupling relationship remains poorly understood. In this paper, we explore the influences of the spatial pore pressure distribution on S_h/P_p coupling and then on failure pressure predictions and trap integrity evaluation. With analytical models, we predict the fluid pressure sustainable within a reservoir before failure of its overpressured shale cover. We verify our analytical predictions with experiments involving analogue materials and fluids. We show that hydraulic fracturing and seal breach occur for fluid pressure greater than it would be expected from conventional retention capacity. This can be explained by the impact of the fluid overpressure field in the overburden and the pressure diffusion around the reservoir on the principal stresses. We calculate that supralithostatic pressure could locally be reached in overpressured covers. We also define the retention capacity of a cover (RC) surrounding a fluid source or reservoir as the difference between the failure pressure and the fluid overpressure prevailing in shale at the same depth. In response to a localized fluid pressure rise, we show that the retention capacity does not only depend on the pore fluid overpressure of the overburden but also on the tensile strength of the cover, its Poisson’s ratio, and the depth and width of the fluid source.     

Comparison of the LEW88516 and ALHA77005 martian meteorites: Similar but distinct

Abstract By mineral and bulk compositions, the Lewis Cliff (LEW) 88516 meteorite is quite similar to the ALHA77005 martian meteorite. These two meteorites are not paired because their mineral compositions are distinct, they were found 500 km apart in ice fields with different sources for meteorites, and their terrestrial residence ages are different. Minerals in LEW88516 include: olivine, pyroxenes (low- and high-Ca), and maskelynite (after plagioclase); and the minor minerals chromite, whitlockite, ilmenite, and pyrrhotite. Mineral grains in LEW88516 range up to a few mm. Texturally, the meteorite is complex, with regions of olivine and chromite poikilitically enclosed in pyroxene, regions of interstitial basaltic texture, and glass-rich (shock) veinlets. Olivine compositions range from Fo₆₄ to Fo₇₀, (avg. Fo₆₇), more ferroan and with more variation than in ALHA77005 (Fo₆₉ to Fo₇₃). Pyroxene compositions fall between En₇₇Wo₄ and En₆₅Wo₁₅ and in clusters near En₆₃Wo₉ and En₅₃Wo₃₃, on average more magnesian and with more variation than in ALHA77005. Shock features in LEW88516 range from weak deformation through complete melting. Bulk chemical analyses by modal recombination of electron microprobe analyses, instrumental neutron activation, and radiochemical neutron activation confirm that LEW88516 is more closely related to ALHA77005 than to other known martian meteorites. Key element abundance ratios are typical of martian meteorites, as is its non-chondritic rare earth pattern. Differences between the chemical compositions of LEW88516 and ALHA77005 are consistent with slight differences in the proportions of their constituent minerals and not from fundamental petrogenetic differences. Noble gas abundances in LEW88516, like those in ALHA77005, show modest excesses of ⁴⁰Ar and ¹²⁹Xe from trapped (shock-implanted) gas. As with other ALHA77005 and the shergottite martian meteorites (except EETA79001), noble gas isotope abundances in LEW88516 are consistent with exposure to cosmic rays for 2.5–3 Ma. The absence of substantial effects of shielding from cosmic rays suggest LEW88516 spent this time as an object no larger than a few cm in diameter.     

Regional Considerations of Coastline Change,Tsunami Damage and Recovery along the Southern Coast of the Bay of Izmit (The Kocaeli (Turkey) Earthquake of 17 August 1999)

Co-seismic phenomena along the south coastline included liquefaction, subsidenceand tsunami. Construction on areas composed of fluvial and alluvial sediments aswell as unconsolidated fill increased the risk by creating potential for amplificationof seismic waves. Cyclic mobility liquefaction was common along the coastline, andlevel-ground liquefaction was observed. Flow liquefaction is held forth as a possibilityin the Deirmendere submarine landslide. Damage to structures was markedly more in areas of unconsolidated sediments. One or more tsunami struck immediately after the event; the uniformity of tsunami impact indicating a wave coming from 310° suggests that submarine faulting was the major source of tsunami. Over 800,000 m² of subsidence resulted from sediment slumping, fault controlled subsidence, and possibly post-liquefaction sediment compaction. After a brief period of post-event abandonment, reclamation and use of coastal areas is well underway. This creates a tension between human desires pushing for quick and inexpensive re-inhabitation of the coastal areas, and the needs for zoning and building codes for risk reduction. In this high-risk area suchcontrary cultural mandates cannot yield ideal results. It is suggested that an alternativemodel of immediate post-event creation of parks and natural areas that would yield benefit is preferable in coastal areas rather than the enforcement approach currently favored.     

Estimating coseismic deformations from near source strong motion records: methods and case studies

Digital strong-motion accelerographs have opened up the possibility of extracting ground motion characteristics at much lower frequencies than was offered by analogue instruments. High-quality digital data obtained close to the faults have tempted several efforts to retrieve permanent ground displacements after an earthquake. Such attempts have been partly successful, and somewhat subjective, the main reason being the presence of baseline offsets in the accelerometric data. We review existing methods for such applications, discuss their limitations and propose a more objective and improved scheme to make baseline adjustments and obtain permanent displacements. The proposed technique is applied to 26 digital recordings from the 29 May 2008 Ölfus Earthquake in South Iceland and 9 recordings from the 1999 Chi-Chi, Taiwan, Earthquake, and the permanent displacements obtained are compared with published results and GPS measurements from nearby stations. Our case studies show that the proposed technique, in addition to being simple and objective, is effective in making adjustments for baseline errors in accelerometric data.     

Wavelet Analysis of Solar Diameter Measurements Performed at Calern Observatory Astrolabe

Since 1975, a visual program of solar diameter measurement is pursuedat Calern Observatory (France). These observations allowed to put inevidence variations in solar data. Several studies were developed inorder to analyze the data using appropriate me thods (deconvolution ofthe observation window function and least square fits) (Moussaouiet al., 1999). We present in this work a time-frequency studyof the found harmonic terms. It is developed using the wavelettransform. The obtained results are presented and discussed.     

Estimation of groundwater evaporation and salt flux from Owens Lake, California, USA

Groundwater evaporation and subsequent precipitation of soluble salts at Owens Lake in eastern California have created one of the single largest sources of airborne dust in the USA, yet the evaporation and salt flux have not been fully quantified. In this study, we compare eddy correlation, microlysimeters and solute profiling methods to determine their validity and sensitivity in playa environments. These techniques are often used to estimate evaporative losses, yet have not been critically compared at one field site to judge their relative effectiveness and accuracy. Results suggest that eddy correlation methods are the most widely applicable for the variety of conditions found on large playa lakes. Chloride profiling is shown to be highly sensitive to thermal and density-driven fluxes in the near surface and, as a result, appears to underestimate yearly groundwater evaporation. Yearly mean groundwater evaporation from the playa surface estimated from the three study areas was found to range from 88 to 104 mm year⁻¹, whereas mean evaporation from the brine-covered areas was 872 mm year⁻¹. Uncertainties on these mean rates were estimated to be ±25%, based on comparisons between eddy correlation and lysimeter estimates. On a yearly basis, evaporation accounts for approximately 47 × 10⁶ m³ of water loss from the playa surface and open-water areas of the lake. Over the playa area, as much as 7.5 × 10⁸ kg (7.5 × 10⁵ t) of salt are annually concentrated by evaporation at or near the playa surface, much of which appears to be lost during dust storms in area.     

Petrology and geochemistry of greywackes from Goa-Dharwar sector,western Dharwar Craton: Implications for volcanoclastic origin

Late Archaean Supracrustals of the Goa-Dharwar sector (GDS) are composed of a thick sequence of greywacke sequence with narrow intercalations of quartzite, BIF and carbonates. Mafic volcanics occupy the base of the sequence. The greywackes are predominantly tuffacious containing chlorite-sericite and hornblende. Arkosic variations containing biotite dominate the western part of the sector. Fine-grained variations occur as isolated narrow lenses within other types of greywackes. The conglomeratic greywackes are localized along the western and the eastern margins of the sector. All of the greywackes are all typically immature containing coarser clasts of mostly plagioclase (18–23%) and quartz (32–34%). Lithic fragments of felsic volcanic rocks are common. The matrix is dominated by mafic material. Biotite and amphibole are related to metamorphic recrystallization. Chlorite, sericite, epidote, carbonate and chert are products of the interplay of diagenesis and low-grade metamorphism. Fe-Ti oxide, sphene, apatite and zircon are usual accessories. But for slight enrichment in K₂O, the major element chemistry of the GDS greywackes is similar to the chemistry of Late Archaean greywackes. They also compare in respect of V, Co, Hf contents, K₂O/Na₂O, SiO₂/Al₂O₃, Na₂O/Al₂O₃, Ba/Rb, Th/U, La/Th, Sm/Nd ratios, steep REE patterns with distinct LREE enrichment and HREE depletion. The GDS greywackes however are distinctly enriched in Rb, Ba, Sr, Th, U, Cu, Zr, Ce/Ce* and depleted in Cr, Ni, and Zn. The conglomeritic and biotite bearing verities contain considerable proportions of clasts derived from the basement tonalitic/granitic terrain. The common tuffacious greywackes containing hornblende and biotite-sericite however include only volcanic clasts and bear evidence of derivation from submarine weathering of predominantly felsic volcanics erupted on a large scale to form a magmatic arc in the later stages of geosynclinal deposition. Geochemical data suggest that the GDS greywackes were laid down in progressively changing basin geometry from a passive to active continental margin and island arc setting.     

Colluvial and alluvial sediment archives temporally resolved by OSL dating: Implications for reconstructing soil erosion

Colluvial and alluvial sediments represent important geoarchives to reconstruct long-term soil erosion and to gain insight into the complex system of sediment cascades and sediment fluxes within a catchment. In this respect, the temporal information of sediment archive formation is essential and achievable through optical stimulated luminescence (OSL) dating. In this study, colluvial and alluvial sediments from a mesoscale catchment in northern Bavaria were investigated and dated by OSL. Insufficient sediment bleaching was detected for some of the samples. In these cases, the method proposed by Fuchs and Lang [Fuchs, M., Lang, A., 2001. OSL dating of coarse-grain fluvial quartz using single-aliquot protocols on sediments from NE Peloponnese, Greece. Quaternary Science Reviews 20, 783–787.] was applied for equivalent dose (D_e) determination. The calculated OSL ages are in stratigraphic order and their accuracy is confirmed by ¹⁴C age control. Based on the chronostratigraphies for alluvial and colluvial archives, there is a dominant synchronous sedimentation history for the Medieval and Modern period, but initiation of Holocene sedimentation occurred at different times in the upper and lower parts of the catchment. The latter phenomenon might be explained by the decoupled sediment fluxes between both the slope–channel system and the upper and lower catchment.     

Magmatic processes that generated the rhyolite of Glass Mountain, Medicine Lake volcano, N. California

Glass Mountain consists of a 1 km³, compositionally zoned rhyolite to dacite glass flow containing magmatic inclusions and xenoliths of underlying shallow crust. Mixing of magmas produced by fractional crystallization of andesite and crustal melting generated the rhyolite of Glass Mountain. Melting experiments were carried out on basaltic andesite and andesite magmatic inclusions at 100, 150 and 200 MPa, H₂O-saturated with oxygen fugacity controlled at the nickel-nickel oxide buffer to provide evidence of the role of fractional crystallization in the origin of the rhyolite of Glass Mountain. Isotopic evidence indicates that the crustal component assimilated at Glass Mountain constitutes at least 55 to 60% of the mass of erupted rhyolite. A large volume of mafic andesite (2 to 2.5 km³) periodically replenished the magma reservoir(s) beneath Glass Mountain, underwent extensive fractional crystallization and provided the heat necessary to melt the crust. The crystalline residues of fractionation as well as residual liquids expelled from the cumulate residues are preserved as magmatic inclusions and indicate that this fractionation process occurred at two distinct depths. The presence and composition of amphibole in magmatic inclusions preserve evidence for crystallization of the andesite at pressures of at least 200 MPa (6 km depth) under near H₂O-saturated conditions. Mineralogical evidence preserved in olivine-plagioclase and olivine-plagioclase-high-Ca clinopyroxene-bearing magmatic inclusions indicates that crystallization under near H₂O-saturated conditions also occurred at pressures of 100 MPa (3 km depth) or less. Petrologic, isotopic and geochemical evidence indicate that the andesite underwent fractional crystallization to form the differentiated melts but had no chemical interaction with the melted crustal component. Heat released by the fractionation process was responsible for heating and melting the crust. Received: 26 March 1996 / Accepted: 14 November 1996