Studies of ultracompact H ii regions — II. High-resolution radio continuum and methanol maser survey

High spatial resolution radio continuum and 6.67-GHz methanol spectral line data are presented for methanol masers previously detected by Walsh et al. (1997). Methanol maser and/or radio continuum emission is found in 364 cases towards IRAS -selected regions. For those sources with methanol maser emission, relative positions have been obtained to an accuracy of typically 0.05 arcsec, with absolute positions accurate to around 1 arcsec. Maps of selected sources are provided. The intensity of the maser emission does not seem to depend on the presence of a continuum source. The coincidence of water and methanol maser positions in some regions suggests there is overlap in the requirements for methanol and water maser emission to be observable. However, there is a striking difference between the general proximity of methanol and water masers to both cometary and irregularly shaped ultracompact (UC) H  ii regions, indicating that, in other cases, there must be differing environments conducive to stimulating their emission. We show that the methanol maser is most likely present before an observable UC H  ii region is formed around a massive star and is quickly destroyed as the UC H  ii region evolves. There are 36 out of 97 maser sites that are linearly extended. The hypothesis that the maser emission is found in a circumstellar disc is not inconsistent with these 36 maser sites, but is unlikely. It cannot, however, account for all other maser sites. An alternative model which uses shocks to create the masing spots can more readily reproduce the maser spot distributions.     

Turbulence Statistics Above And Within Two Amazon Rain Forest Canopies

The turbulence structure in two Amazon rain forestswas characterised for a range of above-canopystability conditions, and the results compared withprevious studies in other forest canopies and recenttheory for the generation of turbulent eddies justabove forest canopies. Three-dimensional wind speedand temperature fluctuation data were collectedsimultaneously at up to five levels inside and abovetwo canopies of 30–40 m tall forests, during threeseparate periods. We analysed hourly statistics, jointprobability distributions, length scales, spatialcorrelations and coherence, as well as power spectraof vertical and horizontal wind speed.The daytime results show a sharp attenuation ofturbulence in the top third of the canopies, resultingin very little movement, and almost Gaussianprobability distributions of wind speeds, in the lowercanopy. This contrasts with strongly skewed andkurtotic distributions in the upper canopy. At night,attenuation was even stronger and skewness vanishedeven in the upper canopy. Power spectral peaks in thelower canopy are shifted to lower frequencies relativeto the upper canopy, and spatial correlations andcoherences were low throughout the canopy. Integrallength scales of vertical wind speed at the top of thecanopy were small, about 0.15 h compared to avalue of 0.28 h expected from the shear lengthscale at the canopy top, based on the hypothesis that theupper canopy air behaves as a plane mixing layer. Allthis suggests that, although exchange is not totallyinhibited, tropical rain forest canopies differ from other forests in that rapid, coherentdownward sweeps do not penetrate into the lowercanopy, and that length scales are suppressed. This isassociated with a persistent inversion of stability inthat region compared to above-canopy conditions. Theinversion is likely to be maintained by strong heatabsorption in the leaves concentrated near thecanopy top, with the generally weak turbulence beingunable to destroy the temperature gradients over thelarge canopy depth.     

震后快速钻探:历史、现状与未来

大地震发生后立即在断层带上进行钻探可以帮助我们获取更多的地震信息,尤其是可获得决定断层动态破裂的摩擦水平和强度,观测断层的愈合过程及可能触发余震的应力变化,并可获取控制破裂过程的重要的物理和化学属性。在2008年11月由国际大陆科学钻探项目（ICDP）和南加州地震中心（SCEC）联合在日本东京举办的为期3天的“震后快速钻探：历史、现状与未来”研讨会上,     

Geochemistry of beryllium in Bulgarian coals

The beryllium content of about 3000 samples (coal, coaly shales, partings, coal lithotypes, and isolated coalified woods) from 16 Bulgarian coal deposits was determined by atomic emission spectrography. Mean Be concentrations in coal show great variability: from 0.9 to 35 ppm for the deposits studied. There was no clear-cut relationship between Be content and rank. The following mean and confidence interval Be values were measured: lignites, 2.6 ± 0.8 ppm; sub-bituminous coals, 8.2 ± 3.3 ppm; bituminous coals, 3.0 ± 1.2 ppm; and anthracites, 19 ± 9.0 ppm. The Be contents in coal and coaly shales for all deposits correlated positively suggesting a common source of the element. Many samples of the coal lithotypes vitrain and xylain proved to be richer in Be than the hosting whole coal samples as compared on ash basis. Up to tenfold increase in Be levels was routinely recorded in fusain. The ash of all isolated coalified woods was found to contain 1.1 to 50 times higher Be content relative to its global median value for coal inclusions.Indirect evidence shows that Be occurs in both organic and inorganic forms. Beryllium is predominantly organically bound in deposits with enhanced Be content, whereas the inorganic form prevails in deposits whose Be concentration approximates Clarke values.The enrichment in Be exceeding the coal Clarke value 2.4 to 14.5 times in some of the Bulgarian deposits is attributed to subsynchronous at the time of coal deposition hydrothermal and volcanic activity.     

Automated Extraction of a Five‐Year LA‐ICP‐MS Trace Element Data Set of Ten Common Glass and Carbonate Reference Materials: Long‐Term Data Quality,Optimisation and Laser Cell Homogeneity

LA‐ICP‐MS is increasingly applied to obtain quantitative multi‐element data with minimal sample preparation, usually achieved by calibration using reference materials (RMs). However, some ubiquitous RMs, for example the NIST SRM 61× series glasses, suffer from reported value uncertainties for certain elements. Moreover, no long‐term data set of analyses conducted over a range of ablation and tuning conditions exists. Thus, there has been little rigorous examination of the extent to which offsets between measured and reported values are the result of error in these values rather than analytically induced fractionation. We present new software (‘LA‐MINE’), capable of extracting LA‐ICP‐MS data with no user input, and apply this to our system, yielding over 5 years of data (~ 5700 analyses of ten glass and carbonate RMs). We examine the relative importance of systematic analytical bias and possible error in reported values through a mass‐specific breakdown of fourteen of the most commonly determined elements. Furthermore, these data, obtained under a wide range of different ablation conditions, enable specific recommendations of how data quality may be improved, for example the role of diatomic gas, the effect of differential inter‐glass fractionation factors and choice of transport tubing material. Finally, these data demonstrate that the two‐volume Laurin ablation cell is characterised by no discernible spatial heterogeneity in measured trace element ratios.     

Geoarchaeological evidence on a Late Bronze Age earthquake,Ohrid Basin (North Macedonia)

Geoarchaeological investigations on the northeastern shore of Lake Ohrid revealed 3.5 m thick deepwater lacustrine sediments overlying terrestrial vegetation macrofossils, worked wood and abundant potsherds dated to the Late Bronze Age (LBA). Distinct contact of deepwater sediment with the sub-aerial weathered limestone bedrock point to a sudden increase in lake level. According to radiocarbon data, catastrophic flooding occurred shortly after 1214 yr bc. Because the area is located in a highly active seismic zone, we propose that this event was caused by tectonically induced, metre-scale coseismic subsidence related to faults bordering the Ohrid alluvial plain. Moreover, this event coincides well with a dramatic switch in the habitation and settlement strategy in the region. More important, however, is the finding that the age of the proposed massive tectonic event and change in habitation lies within the interval of the proposed ‘earthquake storm’ in the eastern Mediterranean dated to 1225–1175 bc. As the Ohrid-Korça zone belongs to the same tectonic province, a relationship between the abovementioned earthquakes and the proposed event can be expected. This research therefore might provide the first direct evidence of a large-scale earthquake event linkable to the LBA collapse of Europe's first urban civilisation in the Aegean.     

X-ray absorption contrast images of binary chemical reactions

Low-divergence synchrotron-sourced X-rays enable a radiographic imaging scheme for full characterization of binary chemical reactions and characterization by type of more complex reactions, in situ, in diamond anvil cells (DAC). Spatially resolved reactants are induced to react by laser heating of their interface. The spatially intermediate products are observed through X-ray absorption contrast. Limits to the technique include the ability to maintain controlled experiment geometry during compression and the ability to resolve chemical differences between reactants and products by X-ray absorption. The ability to make in situ observations at experimental pressure and temperature obviates the problem with quenching techniques for capturing liquid compositions in experiments with dimensions smaller than the diffusion length during quenching time. Partially molten Fe-alloy systems, of poor quenchability, are examined at DAC pressures and temperatures for relevance to Earth's core constitution and evolution. Determinations of eutectic melting in Fe–FeS match known results. Of the probable light elements that may alloy with Fe in the Earth's liquid outer core, Fe–FeS experiments show only modest quenching problems, but C and Si alloy experiments are highly vulnerable to quenching artifacts. The observed reactivity of FeS, Fe₃C, FeSi, and FeO(OH) with Fe in DAC makes the observed non-reactivity between Fe and FeO more significant, reducing the probability that oxygen alone is the major alloy in Earth's molten outer core.     

A Method for Estimating Field-Scale Mass Transfer Rate Parameters and Assessing Aquifer Cleanup Times

A general method for estimating ground-water solute mass transfer rate parameters from field test data is presented. The method entails matching solute concentration and hydraulic head data collected during the recovery phase of a pumping test through application of a simulation-regression technique. Estimation of hydraulic conductivity and mass transfer rate parameter values is performed by fitting model simulations to the data. Parameter estimates are utilized to assess cleanup times for pump-and-treat aquifer remediation scenarios. Uncertainty in the cleanup time estimate is evaluated using statistical information obtained with the parameter estimation technique. Application of the method is demonstrated using a hypothetical ground-water flow and solute transport system. Simulations of field testing, parameter estimation, and remedial time frames are performed to evaluate the usefulness of the method. Sets of random noise that signify potential field and laboratory measurement errors are combined with the hypothetical data to provide rigorous testing of the method. Field tests are simulated using ranges of values for data noise, the mass transfer rate parameters, the test pumping rates, and the duration of recovery monitoring to evaluate their respective influence on parameter and cleanup time estimates. The demonstration indicates the method is capable of yielding accurate estimates of the solute mass transfer rate parameters. When the parameter values for the hypothetical system are well estimated, cleanup time predictions are shown to be more accurate than when calculated using the local equilibrium assumption.