The Finnmarkian Orogeny revisited: An isotopic investigation in eastern Finnmark, Arctic Norway

The Scandinavian Caledonides have been viewed as resulting from either a single Silurian (i.e. Scandian) event or from polycyclic orogenies involving several collisions on the margin of Baltica. Early studies of the Kalak Nappe Complex (KNC) in Finnmark, Arctic Norway, led to the hypothesis of an Early Cambrian-Early Ordovician (520-480 Ma) Finnmarkian Orogeny, though the nature of this tectonic event remains enigmatic. In this contribution we have employed in situ UV laser ablation Ar-Ar dating of fine-grained phyllite and schist from the eastern Caledonides of Arctic Norway to investigate the presence of pre-Scandian tectonometamorphic events. U-Th-Pb detrital zircon and whole rock Sm-Nd analyses have been used to test the regional stratigraphic correlations of these metasedimentary rocks. These results indicate that the Berlevåg Formation within the Tanafjord Nappe, previously assumed to be part of the KNC, was deposited after 1872 Ma and prior to a low temperature hydrothermal event at 555 ± 15 Ma. It has a likely provenance on the Baltica continent, lacks any Grenville-Sveconorwegian detrital zircons, and thus cannot be part of the KNC which contains abundant detritus in this age range. Instead the Berlevåg Formation is interpreted as part of the Laksefjord Nappe Complex, which structurally underlies the KNC. Laser-ablation argon-argon dating also shows that late Caledonian (i.e. Scandian) tectonometamorphism affected both the KNC and its immediate footwall at c. 425 ± 15 Ma. This is corroborated by a step-heating argon-argon muscovite age of 424 ± 3 Ma which is interpreted as dating cooling. However, within two samples from the KNC, an earlier (Middle-Late Cambrian) metamorphic event is also recorded. A biotite-grade schist yielded an Ar-Ar inverse isochron age of 506 ± 17 Ma from whole rock surfaces, in which the mineral domains are too fine-grained to date individually. An early generation of muscovite from a coarser-grained amphibolite-facies sample yielded an inverse isochron of 498 ± 13 Ma. Both isochron ages have atmospheric argon intercept values. Previous studies have documented similar Cambrian ages in the Caledonian nappes below the KNC. These results suggest correlative tectonometamorphic events in the eastern KNC and its footwall at c. 500 Ma. This Cambrian event may reflect the arrival of the Kalak Nappe Complex as a previously constructed exotic mobile belt onto the margin of Baltica. Combined with recent studies from the western Kalak Nappe Complex, the results do not support the traditional constraint on the Finnmarkian Orogeny sensu stricto. However they vindicate classic tectonic models involving a Cambrian accretion event.     

Stable carbon-isotopic compositions of lipids isolated from the ammonia-oxidizing chemoautotroph Nitrosomonas europaea

For the ammonia-oxidizing bacterium Nitrosomonas europaea, grown autotrophically using semicontinuous culturing, average biomass was depleted in ¹³C relative to CO₂ dissolved in the medium by ca. 20‰ and the total-lipid extract was depleted in ¹³C relative to biomass by 3.7‰. The n-alkyl lipids (weighted average of fatty acids) and isoprenoid lipids (weighted average of hopanoids) were both depleted in ¹³C relative to biomass by about 9‰. The large depletion in the isoprenoid lipids seems to indicate that isotopic fractionations associated with the biosynthesis of methylerythritol phosphate (MEP) affected at least two carbon positions in each isoprene unit. Among the fatty acids, trans-9-hexadecenoic acid was most depleted (13.0‰ relative to biomass), followed by cis-9- hexadecenoic acid (9.6‰) and hexadecanoic acid (6.9‰). Isotopic relationships between the three acids suggest that significant isotope effects were associated with the desaturation and cis to trans isomerization of fatty acids. Given these observations, hopanoids produced by ammonia-oxidizing bacteria growing in natural waters are likely to be depleted in ¹³C by 26–30‰ relative to dissolved CO₂. Since CO₂ at aquatic oxyclines is often depleted in ¹³C, the range of δ values expected for hopanoids is ca. −34‰ to −55‰. The δ values of geohopanoids observed in numerous studies and attributed to unspecified chemoautotrophs fall within this range.     

The carbon isotopic response of algae, (cyano)bacteria, archaea and higher plants to the late Cenomanian perturbation of the global carbon cycle: Insights from biomarkers in black shales from the Cape Verde Basin (DSDP Site 367)

The stable carbon isotopic compositions of free and sulfur (S)-bound biomarkers derived from algae, (cyano)bacteria, archaea and higher plants and total organic carbon (TOC) during the first phase of the late Cenomanian/Turonian oceanic anoxic event (OAE) were measured in black shales deposited in the southern proto-Atlantic Ocean in the Cape Verde basin (DSDP Site 367) to determine the response of these organisms to this major perturbation of the global carbon cycle resulting from widespread burial of marine organic matter. The average positive isotope excursions of TOC and biomarkers varied from 5.1‰ to 8.3‰. The δ¹³C values were cross correlated to infer potential common sources of biomarkers. This revealed common sources for C₃₁ and C₃₂ hopanes but no 1:1 relationship for pristane and phytane. The correlation of δ¹³C_TOC with the δ¹³C value of sulfur (S)-bound phytane is the strongest. This is because S-bound phytane is derived from phytol that originates from all marine primary producers (algae and cyanobacteria) and thus represents a weighted average of their carbon isotopic compositions. The δ¹³C values of S-bound phytane and C₃₅ hopane were also used to estimate pCO₂ levels. Before the OAE burial event, pCO₂ levels are estimated to be ca. 1300 ppmv using both biomarkers and the independent maximum Rubisco fractionation factors. At times of maximum organic carbon burial rates during the OAE, reconstructed pCO₂ levels are estimated to be ca. 700 ppmv. However, compared to other C/T OAE sections the positive isotope excursion of S-bound phytane is also affected by an increased production during the OAE. When we compensate for this, we arrive at pCO₂ levels around 1000 ppmv, a reduction of ca. 25%. This indicates that burial of organic matter can have a large effect on atmospheric CO₂ levels.     

Thermal stability of ladderane lipids as determined by hydrous pyrolysis

Anaerobic ammonium oxidation (anammox) has been recognized as a major process resulting in loss of fixed inorganic nitrogen in the marine environment. Ladderane lipids, membrane lipids unique to anammox bacteria, have been used as markers for the detection of anammox in marine settings. However, the fate of ladderane lipids after sediment burial and maturation is unknown. In this study, anammox bacterial cell material was artificially matured by hydrous pyrolysis at constant temperatures ranging from 120 to 365 °C for 72 h to study the stability of ladderane lipids during progressive dia- and catagenesis. HPLC-MS/MS analysis revealed that structural alterations of ladderane lipids already occurred at 120 °C. At temperatures >140 °C, ladderane lipids were absent and only more thermally stable products could be detected, i.e., ladderane derivatives in which some of the cyclobutane rings were opened. These diagenetic products of ladderane lipids were still detectable up to temperatures of 260 °C using GC-MS. Thus, ladderane lipids are unlikely to occur in ancient sediments and sedimentary rocks, but specific diagenetic products of ladderane lipids will likely be present in sediments and sedimentary rocks of relatively low maturity (i.e., C₃₁ hopane 22S/(22S + 22R) ratio <0.2 or ββ/(αβ + βα + ββ) ratio of >0.5).     

Microbial mineralization and assimilation of black carbon: Dependency on degree of thermal alteration

Black carbon is degraded slowly in the environment and its formation can therefore be an effective sink for atmospheric CO₂. This study examined whether charcoal is assimilated by microorganisms or not and estimated the rate of mineralization depending on the degree of thermal alteration of the black carbon. Charcoals were produced at three different temperatures from homogeneously ¹⁴C labelled plant material and incubated in soil, and ¹⁴C in the evolved CO₂ and the microbial biomass was measured. Unlike parallel plant samples, CO₂ evolution from the charcoals showed no lag phase, but a period of faster CO₂ evolution for the first 5–8 days followed by a period of slow evolution. The mineralization of charcoal appeared to decrease with increasing temperature at which it was produced. This was also the case after the initial period of fast CO₂ evolution. With the techniques used, it was not possible to observe any microbial assimilation of charcoal, either because it did not occur, or because the methods used were not sufficiently sensitive. However, the lack of a lag phase in the CO₂ evolution from the charcoals is in line with earlier evidence that charcoal is initially oxidized at the surfaces by abiotic processes.     

Sensitivity analysis of support safety factor for predicting the effects of contributing parameters on roof falls in underground coal mines

Roof falls accounted for 18.18% of all fatal accidents in Indian coal mines, contributing about 35.29% of all fatal accidents in below-ground operations in 2005. The support safety factor, always preferred in support planning and design of underground coal mines, may be an important predictor for roof falls. In this paper, geotechnical data were collected from 14 roof fall incident places in an underground coal mine, located in the Eastern India, which has bord and pillar method of workings. The mean value of probabilistic support safety factor for the case study mine was found to be 1.24. However, the probability, of the estimated support safety factor of less than or equal to one, was found to be 0.246. Sensitivity analysis was conducted to analyze the effects of the contributing parameters on support safety factor and the likelihood of the roof fall. The multi-variate regression analysis was carried out for the data generated by Monte Carlo method to correlate the contributing factors to support safety factor. It ranked gallery width as the first parameter to control the support safety factor.     

Mineralogy and composition of Kuroko deposits from northeastern Honshu and their possible modern analogues from the Izu-Ogasawara (Bonin) Arc south of Japan: Implications for mode of formation

The Kuroko deposits of NE Honshu are a key type deposit for the study of volcanogenic massive sulfide deposits. However, these deposits have not been studied in detail since the early 1980's and knowledge of their mode of formation is now dated. In this study, we present the analysis of 12 samples of the Kuroko deposits, 12 samples of submarine hydrothermal minerals from the Sunrise deposit and 6 samples from Suiyo Seamount, both of which are located on the Izu-Ogasawara (Bonin) Arc, for 27 elements. For the Kuroko deposit, Cd>Sb>Ag>Pb>Hg>As>Zn>Cu are highly enriched, Au>Te>Bi>Ba>Mo are moderately enriched, In>Tl are somewhat enriched and Fe is not significantly enriched relative to the average continental crust. Within each of these deposits, a similar pattern of element associations is apparent: Zn–Pb with As, Sb, Cd, Ag, Hg, Tl and Au; Fe–Cu–Ba with As, Sb, Ag, Tl, Mo, Te and Au; Si–Ba with Ag and Au; CaSO₄. The enrichment of the chalcophilic elements in these deposits is consistent with hydrothermal leaching of these elements from the host rocks which are dominantly rhyolite–dacite in the case of the Kuroko deposits, rhyolite in the case of the Sunrise deposit and dacite–rhyolite in the case of the Suiyo Seamount deposit. However, this pattern of element enrichment is also similar to that observed in fumarolic gas condensates from andesitic volcanoes. This suggests that there may be a significant magmatic contribution to the composition of the hydrothermal fluids responsible for the formation of the Kuroko deposits, although it is not yet possible to quantify the relative contributions of these two sources of elements.The compositional data show that Sunrise and Suiyo Seamount deposits are much closer compositionally to the Kuroko deposits from NE Honshu than are the submarine hydrothermal deposits from the JADE site in the Okinawa Trough which contain, on average, significantly higher concentrations of Pb, Zn, Sb, As and Ag than each of these deposits. In spite of the greater similarity in tectonic setting of the Hokuroku Basin in which the Kuroko deposits formed to the Okinawa Trough (intracontinental rifted back-arc basin) compared to Myojin Knoll and Suiyo Seamount (active arc volcanoes), it appears that submarine hydrothermal deposits from Myojin Knoll and Suiyo Seamount are closer analogues of the Kuroko deposit than are those from the Okinawa Trough. The present data are consistent with the magmatic hydrothermal model for the formation of Kuroko-type deposits as formulated by Urabe and Marumo [Urabe, T., Marumo, K., 1991. A new model for Kuroko-type deposits of Japan. Episodes 14, 246–251].     

Mapping Proterozoic unconformity-related uranium deposits in the Rockhole area, Northern Territory, Australia using landsat ETM+

The Rockhole area, Northern Territory, Australia, hosts a number of Proterozoic unconformity-related uranium deposits. The geology of the area features within Paleoproterozoic rocks of the Pine Creek Orogen, near the unconformity with overlying platform cover sandstone of the Paleo- to Mesoproterozoic McArthur Basin. Landsat Enhanced Thematic Mapper plus (ETM+) data was used in the Rockhole area to assist in mapping geological structures and lithology, and to identify anomalous concentrations of ferrous minerals, the product of alteration, which can be indicators of buried uranium mineralization. Several image-processing procedures were applied to the ETM+ data to identify, isolate and enhance mineralogical information as simple and complex false color composites. ETM+ 754 shown as red green and blue respectively was the best simple image. Overall, complex images based on Principal Component Analysis proved to be the most useful products. Sandstone, shale and siltstone, the target lithologies, Koolpin Formation, the target stratigraphic unit, and bleaching pattern due to the removal of iron(II) compounds, the target alteration pattern, were confidently mapped to provide information required by the mineral emplacement model, which ultimately identified areas of likely uranium mineralization. Thus the contrasting behavior of the two principle oxidation states of uranium and iron can be utilized to map/delineate bleached alteration zones associated with economic concentrations of uranium using multispectral sensors like Landsat or better hyperspectral sensors.     

Ultrahigh pressure macro diamonds from Copeton (New South Wales, Australia), based on Raman spectroscopy of inclusions

Mining of Cenozoic alluvial deposits at Copeton and Bingara (Eastern Australia) has produced two million macrodiamonds (0.25 ct median size). Raman spectroscopy is used to identify included minerals within uncut Copeton diamonds, with sealed chamber remnant pressures of 31.7 to 35.6 kbar for coesite, 13.6 and 22.7 kbar for clinopyroxene, and 7.6 kbar for grossular garnet. Assuming elastic behaviour, these values generate inclusion entrapment PT loci which intersect, restricting diamond formation conditions: from 250 °C, 43 kbar to 800 °C, 52 kbar. Larger than error (± 100 °C and ± 4 kbar), this range shows a systematic variation in inclusion composition with diamond zoning and N properties. Published research shows 1) Copeton and Bingara diamonds are unique, and 2) modern alluvium in the Bingara district carries mantle-formed garnet, captured by post-tectonic alkali basalt from an extensive diamondiferous ultrahigh pressure (UHP) terrane that stalled at depth because it is dominated by mafic eclogite. The combined Raman and geological results indicate two sets of subduction UHP diamond formation conditions/protolith are required, firstly cooler oceanic slab and secondly including higher temperature continental crust. The Copeton and Bingara stones are UHP macrodiamonds, and Carboniferous ⁴⁰Ar/³⁹Ar age dates on clinopyroxene inclusions should be interpreted as ages of crystallisation, representing the termination of subduction. The characteristic features of ruptured inclusions and etched percussion marks on Copeton and Bingara diamond indicate volcanic delivery to the earth's surface. Alluvial deposits elsewhere in Eastern Australia may carry similar diamond along with diamond of different origin.     

Magnetotelluric investigations for imaging electrical structure of Garhwal Himalayan corridor,Uttarakhand, India

Magnetotelluric investigations have been carried out in the Garhwal Himalayan corridor to delineate the electrical structure of the crust along a profile extending from Indo-Gangetic Plain to Higher Himalayan region in Uttarakhand, India. The profile passing through major Himalayan thrusts: Himalayan Frontal Thrust (HFF), Main Boundary Thrust (MBT) and Main Central Thrust (MCT), is nearly perpendicular to the regional geological strike. Data processing and impedance analysis indicate that out of 44 stations MT data recorded, only 27 stations data show in general, the validity of 2D assumption. The average geoelectric strike, N70°W, was estimated for the profile using tensor decomposition. 2D smooth geoelectrical model has been presented, which provides the electrical image of the shallow and deeper crustal structure. The major features of the model are (i) a low resistivity (<50Ωm), shallow feature interpreted as sediments of Siwalik and Indo-Gangetic Plain, (ii) highly resistive (> 1000Ωm) zone below the sediments at a depth of 6 km, interpreted as the top surface of the Indian plate, (iii) a low resistivity (< 10Ωm) below the depth of 6 km near MCT zone coincides with the intense micro-seismic activity in the region. The zone is interpreted as the partial melting or fluid phase at mid crustal depth. Sensitivity test indicates that the major features of the geoelectrical model are relevant and desired by the MT data.