Lead isotopes in sulfides from the Stillwater Complex, Montana: evidence for subsolidus remobilization

Isotopic ratios of Pb in sulfide minerals (primarily pyrrhotite, chalcopyrite, and pentlandite) from a suite of samples from the platiniferous J-M Reef of the Stillwater Complex were measured to elucidate the temporal and genetic relationship between sulfides and host silicate minerals. Results indicate that sulfides and coexisting plagioclases are generally not in isotopic equilibrium, that both sulfides and feldspars record highly radiogenic initial ratios at 2.7 Ga, and that a component of “post-emplacement” radiogenic Pb has mixed with common Pb in the sulfides. A model involving introduction of radiogenic Pb carried by fluids derived from sources external to the complex is favored. Analyses of the lead isotopic composition of sulfides in veins which cut the complex indicate that a significant fraction of the radiogenic lead which was added to the sulfides was externally derived during an extensive hydrothermal episode, associated with Proterozoic regional metamorphism around 1.7 Ga. The possibility that some fractions of the radiogenic Pb may have been derived from primary minerals altered during the low-grade metamorphism cannot be discounted. The amount of radiogenic lead added is variable and in some cases negligible. There is a good correlation between the lead isotope composition and the nature of the secondary mineral assemblage. Sulfides and plagioclases in samples that show little or no alteration of the primary minerals are generally in isotopic equilibrium and preserve isotope ratios consistent with magmatic crystallization at 2.7 Ga. Samples with the most radiogenic sulfides contain abundant secondary minerals (serpentine, talc, actinolite, chlorite and zoisite) associated with greenschist facies metamorphism. Some of the radiogenic Pb in the sulfides can be removed by progressive stepwise leaching. However, in most samples recrystallization of sulfides during metamorphism has mixed common Pb and radiogenic Pb throughout the crystal structure such that, in these samples, stepwise leaching does not recover initial Pb isotopic ratios. Plagioclases are much more resistant to low temperature recrystallization and in almost all cases, stepwise leaching reveals the initial lead isotopic composition. The reactivity of sulfides over a wide temperature range enhances their utility in understanding not only the processes involved in their formation at the time of magmatic emplacement but also postmagmatic processes which were important in the redistribution and enrichment of platinum group elements (PGE) within the ore zone. Received: 30 December 1998 / Accepted: 16 June 1999     

Paleoenvironments and origin of the sedimentary phosphorites of the Napo Formation (Late Cretaceous, Oriente Basin, Ecuador)

The Napo phosphorites were deposited at the edge of a stable marine shelf during the Upper Cretaceous (Coniacian) oceanic anoxic event (OAE 3) at the transition from bioclastic limestone to organic-rich shale facies. Phosphogenesis was triggered in the shelf margin environment by a number of factors including strong upwelling currents, high biological activity, plankton blooms, and large amounts of organic matter production and subsequent accumulation. Dissolved phosphate levels increased in the sediment from a combination of anoxic conditions and microbial activity. Once dissolved phosphate concentrations were high enough, apatite began to form around nucleic sites including mineral grains, shells, wood fragments, and foraminifera tests forming peloidal fluorine rich carbonate fluoroapatite (francolite). As the peloids formed, sedimentation continued and dissolved phosphate concentrations diminished. A period of minor winnowing ensued, and as dissolved phosphate concentrations remained low, shale layers were deposited separating the various phosphate layers.     

Magnetotelluric investigations for imaging electrical structure of Garhwal Himalayan corridor,Uttarakhand, India

Magnetotelluric investigations have been carried out in the Garhwal Himalayan corridor to delineate the electrical structure of the crust along a profile extending from Indo-Gangetic Plain to Higher Himalayan region in Uttarakhand, India. The profile passing through major Himalayan thrusts: Himalayan Frontal Thrust (HFF), Main Boundary Thrust (MBT) and Main Central Thrust (MCT), is nearly perpendicular to the regional geological strike. Data processing and impedance analysis indicate that out of 44 stations MT data recorded, only 27 stations data show in general, the validity of 2D assumption. The average geoelectric strike, N70°W, was estimated for the profile using tensor decomposition. 2D smooth geoelectrical model has been presented, which provides the electrical image of the shallow and deeper crustal structure. The major features of the model are (i) a low resistivity (<50Ωm), shallow feature interpreted as sediments of Siwalik and Indo-Gangetic Plain, (ii) highly resistive (> 1000Ωm) zone below the sediments at a depth of 6 km, interpreted as the top surface of the Indian plate, (iii) a low resistivity (< 10Ωm) below the depth of 6 km near MCT zone coincides with the intense micro-seismic activity in the region. The zone is interpreted as the partial melting or fluid phase at mid crustal depth. Sensitivity test indicates that the major features of the geoelectrical model are relevant and desired by the MT data.     

Petrology and geochemistry of eclogite xenoliths from the Rietfontein kimberlite,Northern Cape,South Africa

Petrographic and geochemical features of a suite of eclogite xenoliths from the Rietfontein kimberlite that erupted through probable Proterozoic crust west of the Kaapvaal Craton in the far Northern Cape region of South Africa, are described. Group II eclogites dominate the suite both texturally and chemically, but can be subdivided into bimineralic, opx-bearing and kyanite-bearing groups. Temperature estimates from different geothermometers range from 700 to 1,000°C, indicating derivation from relatively shallow mantle depths. Orthopyroxene-bearing eclogites are inferred to originate from depths of 85 to 115 km and lie close to the average cratonic thermal profile for southern Africa. These uppermost mantle temperatures during the late Cretaceous provide evidence for equilibration of the off-craton lithosphere to craton-like thermal conditions following Namaqua-Natal orogenesis. The kyanite eclogites are distinct from the remaining eclogites in terms of both major and trace element compositions and their lesser degree of alteration. Garnets are richer in Ca, and are Cr-depleted relative to garnets from the bimineralic and opx-bearing eclogites, which tend to be more magnesian. Clinopyroxenes from the kyanite eclogites are more sodic, with higher Al₂O₃ and lower MgO contents than the bimineralic and opx-bearing eclogites. LREE-depletion, positive Sr and Eu anomalies, and the Al-rich, Si-poor bulk composition suggest a plagioclase-rich, probably troctolitic protolith for the kyanite eclogites. In contrast, the major and trace element bulk compositions of the high-MgO bimineralic and orthopyroxene-bearing eclogites are consistent with gabbroic or pyroxenitic precursors, or high-pressure cumulates, rather than mafic to ultramafic lavas. δ¹⁸O values for garnets do not deviate significantly from typical mantle values. The observations reported do not discriminate unambiguously between continental and oceanic origins for the various eclogite components in the mantle lithosphere of this region.     

Increased Terrestrial to Ocean Sediment and Carbon Fluxes in the Northern Chesapeake Bay Associated With Twentieth Century Land Alteration

We calculated Chesapeake Bay (CB) sediment and carbon fluxes before and after major anthropogenic land clearance using robust monitoring, modeling and sedimentary data. Four distinct fluxes in the estuarine system were considered including (1) the flux of eroded material from the watershed to streams, (2) the flux of suspended sediment at river fall lines, (3) the burial flux in tributary sediments, and (4) the burial flux in main CB sediments. The sedimentary maximum in Ambrosia (ragweed) pollen marked peak land clearance (~1900 a.d.). Rivers feeding CB had a total organic carbon (TOC)/total suspended solids of 0.24?±?0.12, and we used this observation to calculate TOC fluxes from sediment fluxes. Sediment and carbon fluxes increased by 138–269% across all four regions after land clearance. Our results demonstrate that sediment delivery to CB is subject to significant lags and that excess post-land clearance sediment loads have not reached the ocean. Post-land clearance increases in erosional flux from watersheds, and burial in estuaries are important processes that must be considered to calculate accurate global sediment and carbon budgets.     

Mesozoic tectonic evolution of the Southeast China Block: New insights from basin analysis

In order to better understand the Mesozoic tectonic evolution of Southeast China Block (SECB in short), this paper describes geological features of Mesozoic basins that are widely distributed in the SECB. The analyzed data are derived from a regional geological investigation on various Mesozoic basins and a recently compiled 1:1,500,000 geological map of Mesozoic–Cenozoic basins. Two types of basin are distinguished according to their tectonic settings, namely, the post-orogenic basin (Type I) and the intracontinental extensional basin (Type II); the latter includes the graben and the half-graben or faulted-depression basins. Our studies suggest that the formation of these basins connects with the evolution of geotectonics of the SECB. The post-orogenic basin (Type I) was formed in areas from the piedmont to the intraland during the interval from Late Triassic to Early Jurassic; and the formation of the intracontinental extensional basin (Type II) connects with an intracontinental crustal thinning setting in the Late Mesozoic. The graben basin was generated during the Middle Jurassic and is associated with a bimodal volcanic eruption; and the half-graben or faulted-depression basin, filled mainly by the rhyolite, tuff and sedimentary rocks during Early Cretaceous, is occupied by the Late Cretaceous–Paleogene red-colored terrestrial clastic rocks. We noticed that the modern outcrops of numerous granites and basins occur in a similar level, and the Mesozoic granitic bodies contact with the adjacent basins by large normal faults, suggesting that the modern landforms between granites and basins were yielded by the late crustal movement. The modern basin and range framework was settled down in the Cretaceous. Abundant sedimentary structures are found in the various basins, from that the deposited environments and paleo-currents are concluded; during the Late Triassic–Early Jurassic time, the source areas were situated to the north and northeast sides of the outcrop region. In this paper, we present the study results on one geological and geographical separating unit and two separating fault zones. The Wuyi orogenic belt is a Late Mesozoic paleo-geographically separating unit, the Ganjiang fault zone behaves as the western boundary of Early Cretaceous volcanic rocks, and the Zhenghe–Dapu fault zone separates the SE-China Coastal Late Mesozoic volcanic-sedimentary basins and the Wuyi orogenic belt. Finally, we discuss the geodynamic mechanisms forming various basins, proposing a three-stage model of the Mesozoic sedimentary evolution.     

Investigation on foaming properties of some organics for oily bubble bitumen flotation

Studies have shown that using organic coated bubbles (“oily” bubbles) could increase bitumen recovery rate in flotation. One way to coat bubbles is that used in the air-assisted solvent extraction process where solvent foam is formed and injected through a capillary to release solvent coated bubbles in a controlled manner into the aqueous system. To investigate adapting this approach, the foaming properties of some organics (Hexane, Heptane, Hexadecane, Petroleum Ether, Toluene, Benzene and Kerosene and their binary mixtures) of potential interest in oily bubble bitumen flotation were investigated. Silicone oil was found to be a good foaming agent in some cases. Bubble stability and film thickness experiments were carried out to help select candidate organics. Surface tension and dynamic viscosity measurements were conducted to examine the mechanism of foaming. Attachment studies showed that droplets of the selected organics readily attached to a bitumen surface compared to air bubbles. From a combination of criteria, 25:75 Hexadecane/Heptane appears to be a promising candidate.     

Investigation of a Limestone Pillar Failure Part 2: Stress History and Application of Fracture Mechanics Approach

Summary Observed pillar failure could not be explained by comparing pillar strength with stresses on the pillar induced by mining activities. Instead, the effects of the combined stress history of strata and pillar on the deformational response of rock mass and rock were assessed. Application of the principles of fracture mechanics, i.e., extension strain and strain energy release rate criteria gave a reasonable explanation for the observed pillar behavior. The derivation of the required fracture mechanics parameters from laboratory tests is described, and the necessity of an interdisciplinary approach to rock engineering, i.e., the use of historical geology, engineering geology, mining engineering and rock mechanics, is mandated.     

Upper Cretaceous carbonate hosted zinc–lead–barite deposits in Northern Thrust Zone, northern Iraq: petrography and geochemistry

Zinc–lead–barite deposits located in Lefan and Lower Banik localities of about 25 km northeast of Zakho City, Northern Iraq consist of a group of strata-bound sulfides hosted in Upper Cretaceous (Upper Campanian–Maastrichtian) dolomitic limestone. Carbonate-hosted ores contain 3.77% Zn, 2% Pb, and 5% Fe, while in lower Banik, they contain 1.5% Zn, 0.37% Pb, and 1.4% Fe. Diagenetic processes, such as dolomitization and recrystalization in addition to the type of microfacies, provided appropriate physical and chemical conditions that permitted the passage of ore-bearing fluids and participated in precipitation and ore localization. These deposits are precipitated in a platform and developed within the Foreland Thrust Belt. Ore precipitated as infill of intergranular dolomite porosity with replaced dolomite and rudist shells forming disseminated crystals that occupy intergranular pore spaces around dolomite and calcite and as infill of dissolution spaces and fractures.