Scope for a small circumsolar annular gravitational contribution to the Pioneer anomaly without affecting planetary orbits

All proposed gravitational explanations of the Pioneer anomaly must crucially face the Equivalence Principle. Thus, if Pioneers 10 and 11 were influenced by anomalous gravitational effects in regions containing other Solar System bodies, then those bodies should likewise be influenced, irrespective of their shape, composition or mass. Although the lack of any observed influence upon planetary orbits severely constrains such explanations, here we aim to construct by computer modeling, hypothetical gravitating annuli having no gravitational impact on planetary orbits from Mercury to Neptune. One model has a central zone, free of radial gravitation in the annular plane, and an ‘onset’ beyond Saturn’s orbit, where sunward annular gravitation increases to match the Pioneer anomaly data. Sharp nulls are included so that Uranus and Neptune escape this influence. Such models can be proportionately reduced in mass: a 1 % contribution to the anomaly requires an annulus of approximately 1 Earth mass. It is thus possible to comply with the JPL assessment of newly recovered data attributing 80 %, or more, of the anomaly to spacecraft heat, which appears to allow small contributions from other causes. Following the possibility of an increasing Kuiper belt density at great ranges, another model makes an outward small anomalous gravitation in the TNO region, tallying with an observed slight indication of such an effect, suggesting that New Horizons may slightly accelerate in this region.     

Rock Mass Deformation Characteristics in High-Steep Slopes Influenced by Open-Pit to Underground Mining

In Daye Iron Mine, the open-pit mining has ended and the underground mining started in 2003. The present pit slopes are as high as 430 m and the slope angle is up to 43°. During the process of open-pit to underground mining, the high-steep pit slopes would be affected by both open-pit mining and underground mining, and its deformation characteristics would become more complex. So in this paper, the trinity method of numerical simulation, model experiment and field test was adopted to analyze the displacement and stress fields systematically. The results show that: (1) Prominent rebound deformation occurs near the slope foot, which is induced by the unloading in open-pit mining. When it is backfilled to 0 m level, the rebound deformation decreases, which indicate that backfilling mass can restrict the deformation and improve the slope stability; (2) Subsidence dominates the slope deformation in open-pit to underground mining and it increases with an increasing elevation of monitoring point; the maximum horizontal displacement occurs in the lower part of the slopes, because the backfilled part is squeezed by both the north slope and the south slope, and it has a lower elastic modulus than the previous orebody; (3) The stress and its variability near the slope foot are much larger than other places, indicating that the slope foot is most affected by stress redistribution and stress concentration may occur here; the stress at other stress monitoring points changes little, indicating that the influence of open-pit to underground mining is local; (4) The effect of underground mining on the deformation of the faults is not prominent; (5) Mining operations in near-ground part affect more on the variation of deformation and stress of pit slopes than that in deeper part.     

Remote sensing for landscape parameters and scale effect

Journal of the Indian Society of Remote Sensing - Development activities must be compatible for possibilities and limitation of natural environment and resources. Predevelopmental analysis must...     

Developing a large‐scale water‐balance approach to seasonal forecasting: application to the 2012 drought in Britain

Seasonal hydrological forecasts, or outlooks, can potentially provide water managers with estimates of river flows and water resources for a lead time of several months ahead. An experimental modelling tool for national hydrological outlooks has been developed which combines a hydrological model estimate of sub‐surface water storage across Britain with a range of seasonal rainfall forecasts to provide estimates of area‐wide hydrological conditions up to a few months ahead. The link is made between a deficit in sub‐surface water storage and a requirement for additional rainfall over subsequent months to enable sub‐surface water storage and river flow to return to mean monthly values. The new scheme is assessed over a recent period which includes the termination of the drought that affected much of Britain in the first few months of 2012. An illustration is provided of its use to obtain return‐period estimates of the ‘rainfall required’ to ease drought conditions; these are well in excess of 200 years for several regions of the country, for termination within a month of 1 April 2012, and still exceed 40 years for termination within three months. National maps of sub‐surface water storage anomaly show for the first time the current spatial variability of drought severity. They can also be used to provide an indication of how a drought situation might develop in the next few months given a range of possible future rainfall scenarios. © 2013 CEH/Crown and John Wiley & Sons, Ltd.     

Magnetic Anisotropy as an Aid to Identifying CRM and DRM in Red Sedimentary Rocks

To further evaluate the potential of magnetic anisotropy techniques for determining the origin of the natural remanent magnetization (NRM) in sedimentary rocks, several new remanence anisotropy measurement techniques were explored. An accurate separation of the remanence anisotropy of magnetite and hematite in the same sedimentary rock sample was the goal.In one technique, Tertiary red and grey sedimentary rock samples from the Orera section (Spain) were exposed to 13 T fields in 9 different orientations. In each orientation, alternating field (af) demagnetization was used to separate the magnetite and hematite contributions of the high field isothermal remanent magnetization (IRM). Tensor subtraction was used to calculate the magnetite and hematite anisotropy tensors. Geologically interpretable fabrics did not result, probably because of the presence of goethite which contributes to the IRM. In the second technique, also applied to samples from Orera, an anisotropy of anhysteretic remanence (AAR) was applied in af fields up to 240 mT to directly measure the fabric of the magnetite in the sample. IRMs applied in 2 T fields followed by 240 mT af demagnetization, and thermal demagnetization at 90°C to remove the goethite contribution, were used to independently measure the hematite fabric in the same samples. This approach gave geologically interpretable results with minimum principal axes perpendicular to bedding, suggesting that the hematite and magnetite grains in the Orera samples both carry a depositional remanent magnetization (DRM). In a third experiment, IRMs applied in 13 T fields were used to measure the magnetic fabric of samples from the Dome de Barrot area (France). These samples had been demonstrated to have hematite as their only magnetic mineral. The fabrics that resulted were geologically interpretable, showing a strong NW-SE horizontal lineation consistent with AMS fabrics measured in the same samples. These fabrics suggest that the rock's remanence may have been affected by strain and could have originated as a DRM or a CRM.Our work shows that it is important to account for the presence of goethite when using high field IRMs to measure the remanence anisotropy of hematite-bearing sedimentary rocks. It also shows that very high magnetic fields (>10 T) may be used to measure the magnetic fabric of sedimentary rocks with highly coercive magnetic minerals without complete demagnetization between each position, provided that the field magnetically saturates the rock.     

Discard mitigation - what we can learn from waste minimization practices in other natural resources?

Solutions to the problem of discarding in fisheries have been debated for decades. Despite this attention, measures to ameliorate discarding have had limited success. Regulators, researchers, and industry continue to struggle with fisheries management and foregone yield in the face of the continued wastage of valuable resources due to discarding.Waste minimization and by-product utilization are powerful imperatives in other sectors that are also reliant on the harvest of natural resources. This paper considers the performance of these sectors in waste minimization and by-product utilization, with the aim of identifying practices and processes that may be applied to ameliorate discarding in fisheries.This paper describes the handling, utilization, and mitigation of discards and waste in the livestock farming, agriculture, mining, and waste management industries, and in particular, in forestry. In terms of biological impact, economic objectives, and management approaches the harvesting of trees has substantial similarities to industrialized fishing. However, the forestry sector has found ways to utilize almost 100% of the natural product harvest by establishing markets and new products. Analogous developments within the fishing industry could substantially improve sustainability through reduced levels of discarding and wastage. Based on the experiences of these sectors it is suggested that evaluations of potential Management Strategies are developed to specifically examine discard mitigation approaches on a broader scale than previously conducted.     

A preliminary investigation into the use of ochre as a remedial amendment in arsenic-contaminated soils

Ochre is an unwanted waste product that accumulates in wetlands and streams draining abandoned coal and metal mines. A potential commercial use for ochre is to remediate As contaminated soil. Arsenic contaminated soil (605 mg kg⁻¹) was mixed with different ochres (A, B and C) in a mass ratio of 1:1 and shaken in 20 mL of deionised water. After 72 h As concentration in solution was ca. 500 μg kg⁻¹ in the control and 1–2.5 μg kg⁻¹ in the ochre treated experiments. In a second experiment soil:ochre mixtures of 0.05–1:1 were shaken in 20 mL of deionised water for 24 h. For Ochres A and C, as solution concentration was reduced to ca. 1 μg kg⁻¹ by 0.2–1:1 ochre:soil mixtures. For Ochre B, as concentration only reached ca. 1 μg kg⁻¹ in the 1:1 ochre:soil mix. Sorption of As was best modelled by a Freundlich isotherm using As sorption per mass of goethite in the ochre (log K = 1.64, n = 0.79, R² = 0.76, p 0.001). Efficiency of ochre in removing As from solution increased with increasing total Fe, goethite, citrate dithionite extractable Fe and surface area.     

Using impacts of deep-level mining to research karst hydrology—a Darcy-based approach to predict the future of dried-up dolomitic springs in the Far West Rand goldfield (South Africa). Part 2: predicting inter-compartmental flow and final groundwater tables

Some of the world’s deepest goldmines operate below dolomitic karst aquifers in the Far West Rand (FWR) goldfield, South Africa. Associated impacts include the continuous dewatering of karst aquifers for over six decades and irreversible changes of the hydrogeological setting. Affecting an area of approximately 400 km² by drawing down the water table up to 700 m, these impacts, and the large amounts of data generated in the process, are used as unique research opportunities to better understand the complex karst hydrology. The focus of this study is on predicting final water table elevations in rewatered aquifers after mining ceases taking the fact that mines hydraulically linked previously disconnected aquifers into account. While part 1 of this series develops the conceptual model, this second part utilises large sets of pertinent data to calculate actual flow rates for predicting the fate of dried up springs after mine closure. Following a Darcy-based approach first applied by Swart et al. (Environ Geol 44:751–770, 2003a) it is not only predicted that the springs will flow again but also shown that linear relationships exist between flow rates through a combined system of karst-fractured aquifers overlying the mine void and the associated hydraulic head driving them. This suggests that—at this scale—porous media-based equations can be meaningfully used to predict flow in non-porous media.