Hotspots in ambient noise caused by ice-edge eddies in the Greenland and Barents Seas

Mesoscale eddies are frequently observed in the Greenland and Barents Seas' marginal ice zone (MIZ). The objective of this study was to investigate the hypothesis that acoustic hotspots along the ice-edge region are due to mesoscale eddy currents interacting with the broken-up ice floes in the MIZ. To test this hypothesis, ambient-noise case studies were carried out during the MIZEX 85-87 and SIZEX 89 field experiments. In each experiment, ice-edge eddies were localized visually from aircraft and by use of satellite remote-sensing data obtained in near real time. Sonobuoys were, thereafter, deployed by fix-wing aircraft and helicopters in selected eddy areas. Ambient-noise data, recorded over several hours by aircraft, were analyzed estimating averaged ambient-noise levels at four selected frequencies: 40, 100, 315, and 1000 Hz. The analysis showed high mean levels and large gradients in ambient noise near ice-edge eddies and during strong wind and wave forcing against the ice edge. The conclusion of this study is that mapping of the ice edge and localization of mesoscale ocean processes using remote sensing from space will provide important input to ambient-noise prediction in the MIZ.     

Hydroacoustic Field of a Point Source in an Inhomogeneous Marine Medium Containing a Cylindrical Body Floating on the Surface

We study the problem of determination of the sound field of a point harmonic source in the coastal zone and the influence of a cylindrical body floating above the source on the sound field formed in the marine medium. A numerical-analytic method is proposed for the determination of the velocity potential. According to this method, the unknown coefficients in the general solution of the problem are determined from the corresponding infinite system of linear algebraic equations by the method of reduction. We present results of numerical calculations for a special case of a waveguide whose parameters are typical of the coastal part of the sea and perform the comparative analysis of the data obtained as a result of variation of the indicated parameters.     

Geology of the Continental Margin of Enderby and Mac. Robertson Lands, East Antarctica: Insights from a Regional Data Set

In 2001 and 2002, Australia acquired an integrated geophysical data set over the deep-water continental margin of East Antarctica from west of Enderby Land to offshore from Prydz Bay. The data include approximately 7700 km of high-quality, deep-seismic data with coincident gravity, magnetic and bathymetry data, and 37 non-reversed refraction stations using expendable sonobuoys. Integration of these data with similar quality data recorded by Japan in 1999 allows a new regional interpretation of this sector of the Antarctic margin. This part of the Antarctic continental margin formed during the breakup of the eastern margin of India and East Antarctica, which culminated with the onset of seafloor spreading in the Valanginian. The geology of the Antarctic margin and the adjacent oceanic crust can be divided into distinct east and west sectors by an interpreted crustal boundary at approximately 58° E. Across this boundary, the continent–ocean boundary (COB), defined as the inboard edge of unequivocal oceanic crust, steps outboard from west to east by about 100 km. Structure in the sector west of 58° E is largely controlled by the mixed rift-transform setting. The edge of the onshore Archaean–Proterozoic Napier Complex is downfaulted oceanwards near the shelf edge by at least 6 km and these rocks are interpreted to underlie a rift basin beneath the continental slope. The thickness of rift and pre-rift rocks cannot be accurately determined with the available data, but they appear to be relatively thin. The margin is overlain by a blanket of post-rift sedimentary rocks that are up to 6 km thick beneath the lower continental slope. The COB in this sector is interpreted from the seismic reflection data and potential field modelling to coincide with the base of a basement depression at 8.0–8.5 s two-way time, approximately 170 km oceanwards of the shelf-edge bounding fault system. Oceanic crust in this sector is highly variable in character, from rugged with a relief of more than 1 km over distances of 10–20 km, to rugose with low-amplitude relief set on a long-wavelength undulating basement. The crustal velocity profile appears unusual, with velocities of 7.6–7.95 km s⁻¹ being recorded at several stations at a depth that gives a thickness of crust of only 4 km. If these velocities are from mantle, then the thin crust may be due to the presence of fracture zones. Alternatively, the velocities may be coming from a lower crust that has been heavily altered by the intrusion of mantle rocks. The sector east of 58° E has formed in a normal rifted margin setting, with complexities in the east from the underlying structure of the N–S trending Palaeozoic Lambert Graben. The Napier Complex is downfaulted to depths of 8–10 km beneath the upper continental slope, and the margin rift basin is more than 300 km wide. As in the western sector, the rift-stage rocks are probably relatively thin. This part of the margin is blanketed by post-rift sediments that are up to about 8 km thick. The interpreted COB in the eastern sector is the most prominent boundary in deep water, and typically coincides with a prominent oceanwards step-up in the basement level of up to 1 km. As in the west, the interpretation of this boundary is supported by potential field modelling. The oceanic crust adjacent to the COB in this sector has a highly distinctive character, commonly with (1) a smooth upper surface underlain by short, seaward-dipping flows; (2) a transparent upper crustal layer; (3) a lower crust dominated by dipping high-amplitude reflections that probably reflect intruded or altered shears; (4) a strong reflection Moho, confirmed by seismic refraction modelling; and (5) prominent landward-dipping upper mantle reflections on several adjacent lines. A similar style of oceanic crust is also found in contemporaneous ocean basins that developed between Greater India and Australia–Antarctica west of Bruce Rise on the Antarctic margin, and along the Cuvier margin of northwest Australia.     

Major variability modes and wind patterns over the Sea of Japan and adjacent areas

The expansion of wind fields observed at fixed times (four times daily) in complex empirical orthogonal functions is performed for the Japan Sea area (34°–53° N, 127°–143° E). The wind fields are taken from the 1998–2004 NCEP/NCAR Reanalysis data with better spatial resolution (1° × 1°) than the standard product, which are publicly available on the Internet. Major modes of wind variability in the Japan Sea area are identified. The modes determine a general direction of air-mass transport throughout a year, zonal and meridional modulation, and a cyclonic and an anticyclonic eddy component. Objective classification of wind fields with respect to the prevailing flow direction is performed, and wind stress and wind-curl patterns are obtained for major events in the cold and warm periods of the year. The pattern obtained can be used in hydrodynamic numerical models of the general circulation of the Japan Sea.     

The mixing efficiency and the processes of restratification in a stably stratified medium

The mechanism of the effect of a collapsing turbulent eddy on diapycnal transport in a stably stratified fluid is considered. It is shown that at small Richardson turbulent numbersRi ₀ the mixing efficiency increases asRi ₀, and at large numbers it decreases in proportion toRi ₀ ^–1/2 .Translated by Mikhail M. Trufanov. UDK 551.465.15.     

Stratigraphy of the sediment infill in Bosphorus Strait: water exchange between the Black and Mediterranean Seas during the last glacial Holocene

The sediment infill over the Paleozoic bedrock in the Bosphorus Strait consists of four sedimentary units which were deposited in the last 26,000 ¹⁴C years B.P. The stratigraphy of these units suggests that this part of the Bosphorus was a freshwater lake between 26,000 and 5,300 ¹⁴C years B.P., depositing sands with a freshwater mollusc fauna of Black Sea neo-euxinian affinity (Dreissena rostriformis, Dreissena polymorpha, and Monodacna pontica). The first appearance of euryhaline Mediterranean molluscs (e.g., Ostrea edulis, Mytilus edulis) was observed at 5,300 ¹⁴C years B.P. in this part of the Bosphorus. Deposition of coarse Mytilus-bank and Ostrea-bank units suggests that the establishment of the present dual-flow regime in the Bosphorus took place at about 4,400 ¹⁴C years B.P.     

SCOPIX – digital processing of X-ray images for the enhancement of sedimentary structures in undisturbed core slabs

X-ray images of sediment core allow recognition of fine-scaled sedimentary structures which traditional epoxy casts or lacquer peels are unable to resolve. The X-ray imaging system SCOPIX has the additional advantage of acquiring high-resolution digital pictures suitable for further analysis by advanced image processing techniques. Because of the frequent presence of both physical and biogenic sedimentary structures in undisturbed sediment cores, two image analysis procedures have been established which simplify the information contained in the images (in term of structures and facies), and allow a quantitative characterization of the observed structures. This form of parametrization of the image structure constitutes an additional source of information for a better interpretation of the physical processes responsible for the generation of the sedimentary structures.     

3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.