Realised added value in dynamical downscaling of Australian climate change

Climate Dynamics - Coarse resolution global climate models (GCMs) cannot resolve fine-scale drivers of regional climate, which is the scale where climate adaptation decisions are made. Regional...     

Re-testing the JET-X Flight Module No. 2 at the PANTER facility

The Joint European X-ray Telescope (JET-X) was the core instrument of the Russian Spectrum-X- γ space observatory. It consisted of two identical soft X-ray (0.3–10 keV) telescopes with focusing optical modules having a measured angular resolution of nearly 15 arcsec. Soon after the payload completion, the mission was cancelled and the two optical flight modules (FM) were brought to the Brera Astronomical Observatory where they had been manufactured. After 16 years of storage, we have utilized the JET-X FM2 to test at the PANTER X-ray facility a prototype of a novel X-ray polarimetric telescope, using a Gas Pixel Detector (GPD) with polarimetric capabilities in the focal plane of the FM2. The GPD was developed by a collaboration between INFN-Pisa and INAF-IAPS. In the first phase of the test campaign, we have re-tested the FM2 at PANTER to have an up-to-date characterization in terms of angular resolution and effective area, while in the second part of the test the GPD has been placed in the focal plane of the FM2. In this paper we report the results of the tests of the sole FM2, using an unpolarized X-ray source, comparing the results with the calibration done in 1996.     

Eocene simple shear and plio-quaternary pure-shear folding in the Central-Eastern Algerian Atlas

Tertiary folds of the central and eastern part of the Algerian Atlas were studied in order to assess their kinematics and regimes of deformation. Folds developed following two main phases of deformation during the Eocene and the Pliocene. The NE-SW trending Eocene folds show a clockwise rotation of fold axis with depth, noncylindrical geometry and a right-stepping en echelon configuration. Early secondary structures inside each fold are also rotated clockwise with respect to the younger folds. These data are in agreement with progressive ‘simple shear’ deformation. Pliocene folds strike E-W and display a cylindrical geometry. Associated Plio-Quaternary brittle structures show no rotational path. These observations are compatible with ‘pure shear’ style of deformation. These results, in combination with focal mechanism solutions, have important implications for the understanding of the kinematic evolution of the western segment of the African-European plate boundary. For Algeria they imply that transcurrent motion during the Paleogene was followed by coaxial shortening with a NNW direction during Neogene-Quaternary times. Comparison with published data for Morocco and Tunisia suggests that this transcurrent regime developed from west to east continuing from the Middle Jurassic through to the Miocene.     

The influence of various seawater components on the buffer capacity for CO2

A series of experiments was performed using artificial seawater samples of increasing complexity, in order to identify, qualitatively and quantitatively, the contribution of main seawater components on the buffer capacity for CO₂.The results show that magnesium plays the most important role in the uptake, enhancing the capacity of the carbonate system alone by more than 100%.     

The western Durkan Complex (Makran Accretionary Prism,SE Iran): A Late Cretaceous tectonically disrupted seamounts chain and its role in controlling deformation style

The Durkan Complex is a key tectonic element of the Makran accretionary prism (SE Iran) and it has been interpreted as representing a continental margin succession. We present here a multidisciplinary study of the western Durkan Complex, which is based on new geological, stratigraphic, biostratigraphic data, as well as geochemical data of the volcanic and meta-volcanic rocks forming this complex. Our data show that this complex consists of distinct tectonic slices showing both non-metamorphic and very low-grade metamorphic deformed successions. Stratigraphic and biostratigraphic data allow us to recognize three types of successions. Type-I is composed by a Coniacian – early Campanian pelagic succession with intercalation of pillow lavas and minor volcaniclastic rocks. Type-II succession includes a volcanic sequence passing to a volcano-sedimentary sequence with Cenomanian pelagic limestones, followed by a hemipelagic sequence. This succession is characterized by abundant mass-transport deposits. Type-III succession includes volcanic and volcano-sedimentary sequences, which are stratigraphically covered by a Cenomanian platform succession. The latter is locally followed by a hemipelagic sequence. The volcanic rocks in the different successions show alkaline geochemical affinity, suggesting an origin from an oceanic within-plate setting. Our new results indicate that the western Durkan Complex represents fragments of seamounts tectonically incorporated in the Makran accretionary wedge during the latest Late Cretaceous–Paleocene. We propose that incorporation of seamounts in the frontal prism caused a shortening of the whole convergent margin and possibly contributed to controlling the deformation style in the Makran Accretionary Wedge during Late Cretaceous–Paleocene times.     

Serviceability analysis of piled foundations supporting tall structures

Acta Geotechnica - Pile foundations supporting tall structures, such as wind turbines, chimneys, silos, elevated water tanks or bridge piers, are subjected during their life span to remarkably...     

Experimental investigation of the time-dependent response of unreinforced and reinforced tunnel faces in cohesive soils

In spite of the increasing diffusion of tunnel boring machines, conventional tunnelling is still preferred for economic reasons in case of short tunnels, unconventional cross sections or irregular tunnel trajectories. In conventional tunnelling, the mechanical response of the tunnel front is a main concern and, when tunnels are excavated in cohesive soils, this is dominated by the time factor, related to geometry, to the mean excavation rate and to the hydro-mechanical properties of the materials involved. This is particularly evident during excavation standstill: front displacements progressively increase with time and, in many cases, the system response under long-term conditions becomes unstable. In conventional tunnelling, a common technique employed to improve the system response (under both short- and long-term conditions) is the installation of fibreglass tubes within the advance core. In this paper, the mechanical response of both unreinforced and reinforced deep tunnel fronts in cohesive soils is experimentally analysed. In particular, the results of a series of 1 g small-scale tests, taking into account both the influence of the excavation rate (the unloading time) on the system response and the evolution with time of the tunnel face displacements, induced by a rapid reduction in the horizontal stress applied on the tunnel face, are reported.     

Effectiveness of geophysical surveys for water wells relocation in overexploited aquifers (the example of Maggiore and Traversola Valleys,Northwestern Italy)

Aquifer overexploitation is a common problem in drinking water management. This will become more and more important given the general reduction of water resources. To overcome overexploitation, one of the most adopted solutions is the relocation of extraction wells. To establish the positions of new wells, a precise knowledge of the hydrogeological setting is required. Specific surveys are therefore necessary to obtain information over wide investigation zones. Geophysical methods, particularly electromagnetic and electrical, can be useful with this aim. In the present paper a case history on the combined use of Electric Resistivity Tomography and Time Domain Electromagnetic soundings is reported. Surveys have been performed within the Maggiore and Traversola Valleys, to investigate the uppermost part of the Quaternary deposits, hosting the near surface aquifer. The electromagnetic data have been inverted with a spatially constrained approach by assuming a quasi 1D model of the subsurface. Geophysical surveys allowed for depicting the depth and lateral continuity of the supposed aquifer level in the surveyed area up to a depth of about 200 m and proposing potential positions for well relocation.     

Middle Jurassic continental to marine transition in an extensional tectonics context: the Genna Selole Fm depositional system in the Tacchi area (central Sardinia,Italy)

In Eastern Sardinia during the early Middle Jurassic, Alpine Tethys opening triggered the rise of a temporary tectonic high. The high collapsed rapidly, was fragmented into separate blocks, and subsequently covered by continental, transitional, and finally shallow marine deposits forming a narrow depositional system comprising the Genna Selole Fm. Present‐day exposures in the southern part of the palaeo‐high allow the sedimentological evolution of the transgressive cover sequence to be ascertained. Initial terrestrial deposits comprise alluvial fan deposits located at the mouths of palaeovalleys. These pass into braid‐deltas and in the coastal areas located between adjacent valleys mouths, palustrine and coastal plain tidally‐influenced environments developed. These environments interfingered laterally and passed seaward into a transitional, siliciclastic to carbonate tidal environment. With the collapse of the tectonic high, the continental to transitional environments were transgressed with deposition of marine carbonates. A comparison with similar coeval deposits of the W‐Mediterranean domain has been undertaken. Copyright © 2015 John Wiley & Sons, Ltd.     

A quantitative approach to fluvial facies models: Methods and example results

Traditional facies models lack quantitative information concerning sedimentological features: this significantly limits their value as references for comparison and guides to interpretation and subsurface prediction. This paper aims to demonstrate how a database methodology can be used to generate quantitative facies models for fluvial depositional systems. This approach is employed to generate a range of models, comprising sets of quantitative information on proportions, geometries, spatial relations and grain sizes of genetic units belonging to three different scales of observation (depositional elements, architectural elements and facies units). The method involves a sequential application of filters to the knowledge base that allows only database case studies that developed under appropriate boundary conditions to contribute to any particular model. Specific example facies models are presented for fluvial environmental types categorized on channel pattern, basin climatic regime and water‐discharge regime; the common adoption of these environmental types allows a straightforward comparison with existing qualitative models. The models presented here relate to: (i) the large‐scale architecture of single‐thread and braided river systems; (ii) meandering sub‐humid perennial systems; (iii) the intermediate‐scale and small‐scale architecture of dryland, braided ephemeral systems; (iv) the small‐scale architecture of sandy meandering systems; and (v) individual architectural features of a specific sedimentary environment (a terminal fluvial system) and its sub‐environments (architectural elements). Although the quantification of architectural properties represents the main advantage over qualitative facies models, other improvements include the capacity: (i) to model on different scales of interest; (ii) to categorize the model on a variety of environmental classes; (iii) to perform an objective synthesis of many real‐world case studies; (iv) to include variability‐related and knowledge‐related uncertainty in the model; and (v) to assess the role of preservation potential by comparing ancient‐system and modern‐system data input to the model.