Shifting Correlation Between Earthquakes and Electromagnetic Signals: A Case Study of the 2013 Minxian–Zhangxian ML 6.5 (MW 6.1) Earthquake in Gansu,China

The shifting correlation method (SCM) is proposed for statistical analysis of the correlation between earthquake sequences and electromagnetic signal sequences. In this method, the two different sequences were treated in units of 1 day. With the earthquake sequences fixed, the electromagnetic sequences were continuously shifted on the time axis, and the linear correlation coefficients between the two were calculated. In this way, the frequency and temporal distribution characteristics of potential seismic electromagnetic signals in the pre, co, and post-seismic stages were analyzed. In the work discussed in this paper, we first verified the effectiveness of the SCM and found it could accurately identify indistinct related signals by use of sufficient samples of synthetic data. Then, as a case study, the method was used for analysis of electromagnetic monitoring data from the Minxian–Zhangxian M_L 6.5 (M_W 6.1) earthquake. The results showed: (1) there seems to be a strong correlation between earthquakes and electromagnetic signals at different frequency in the pre, co, and post-seismic stages, with correlation coefficients in the range 0.4–0.7. The correlation was positive and negative before and after the earthquakes, respectively. (2) The electromagnetic signals related to the earthquakes might appear 23 days before and last for 10 days after the shocks. (3) To some extent, the occurrence time and frequency band of seismic electromagnetic signals are different at different stations. We inferred that the differences were related to resistivity, active tectonics, and seismogenic structure.     

2017年九寨沟MS 7.0地震震源深度测定

为了更好地确定2017年8月8日九寨沟M_(S )7.0地震震源深度其发震机理,利用四川、甘肃和青海区域地震台网的观测波形数据,采用多种方法研究了此次地震的震源深度。首先,采用gCAP方法反演了九寨沟M_(S )7.0地震的震源机制解和矩心深度,结果显示,节面Ⅰ走向243°/倾角87°/滑动角-158°,节面Ⅱ走向151°/倾角68°/滑动角-3°,矩震级为M_(W )6.5,矩心深度为8 km;然后,采用ISOLA近震全波形方法反演了此次地震的震源机制解,反演结果与gCAP方法结果相差不大,矩心深度为7 km;最后,通过sPn震相与Pn震相之间的走时差测定此次地震初始破裂震源深度,结果显示深度约为12 km。研究表明,九寨沟M_(S )7.0地震的矩心深度为7—8 km,初始破裂深度约为12 km。     

全极化探地雷达地下管道分类识别技术

常规探地雷达大多数是单极化雷达,单极化雷达只能获得单极化数据,对复杂环境中管道准确快速地识别比较困难。为了解决此问题,本文采用了全极化探地雷达识别管道的方法,提取了单一管道目标、多个管道目标中任何一个管道目标和受其他目标影响的管道目标的极化属性。结果表明,全极化探地雷达技术对处于极化属性受到影响环境下的管道目标均能较好地识别。因此,全极化探地雷达能够获得更加全面的目标体极化信息,有效地解决了复杂环境中管道准确快速识别比较困难的问题。     

中国南方含油气区构造-沉积类型及其勘探潜力

南方含油气的复杂构造区根据构造—沉积类型的不同,可将其分为四种类型。通过对不同类型典型含油气区的生烃量及非构造运动天然气散失量的化学动力学计算,认为这四种类型含油气区的油气聚集潜力从好到坏依次为:喜马拉雅运动抬升暴露型、燕山运动抬升暴露型、反复抬升—沉降型和海西—印支运动抬升暴露—后期浅埋型。主要构造运动发生越晚,对油气保存越有利。     

梅雨与热带气旋活动的关系

本文利用1957～1998年的资料,以统计分析的方法,对长江中下游梅雨及热带气旋活动的对应关系进行了初步分析,归纳出几点有参考价值的结论以求对热带气旋活动的长期预报有所裨益。     

基于DBSCAN与网格搜索的雷电定位算法

定位精度是评价雷电定位网络的重要指标之一,定位算法直接影响雷电探测结果的精度。雷电监测系统探测数据误差不可避免,传统定位算法不具备抗误差干扰能力,迭代计算易发散,定位结果精度不高。为了满足实际应用需求,提出一种新的雷电定位算法DG-LLA（DBSCAN and grid-search lighting location algorithm）,在定位计算中引入DBSCAN（density-based spatial clustering of applications with noise）方法与网格搜索方法。通过仿真与国家雷电监测网实际定位结果对比分析定位算法性能。结果表明:到达时间差（time difference of arrival,TDOA）法和Taylor级数展开法定位误差较大,仿真区域的均方根误差分别为982 m和668 m;定位中引入DBSCAN方法后,均方根误差明显减小为406 m,引入DBSCAN方法和网格搜索方法后,均方根误差减小为349 m;在相同回击数据条件下,算法DG-LLA与国家雷电监测网相比定位数量更多,回击数据的利用率从43.4%提升到51.5%,新增定位结果周围雷达回波特征较强,定位精度更高。     

Generation of continuous surface soil moisture dataset using combined optical and thermal infrared images

Surface soil moisture (SSM) is a critical variable for understanding water and energy flux between the atmosphere and the Earth's surface. An easy to apply algorithm for deriving SSM time series that primarily uses temporal parameters derived from simulated and in situ datasets has recently been reported. This algorithm must be assessed for different biophysical and atmospheric conditions by using actual geostationary satellite images. In this study, two currently available coarse‐scale SSM datasets (microwave and reanalysis product) and aggregated in situ SSM measurements were implemented to calibrate the time‐invariable coefficients of the SSM retrieval algorithm for conditions in which conventional observations are rare. These coefficients were subsequently used to obtain SSM time series directly from Meteosat Second Generation (MSG) images over the study area of a well‐organized soil moisture network named REMEDHUS in Spain. The results show a high degree of consistency between the estimated and actual SSM time series values when using the three SSM dataset‐calibrated time‐invariable coefficients to retrieve SSM, with coefficients of determination (R²) varying from 0.304 to 0.534 and root mean square errors ranging from 0.020 m³/m³ to 0.029 m³/m³. Further evaluation with different land use types results in acceptable debiased root mean square errors between 0.021 m³/m³ and 0.048 m³/m³ when comparing the estimated MSG pixel‐scale SSM with in situ measurements. These results indicate that the investigated method is practical for deriving time‐invariable coefficients when using publicly accessed coarse‐scale SSM datasets, which is beneficial for generating continuous SSM dataset at the MSG pixel scale.     

楔形刀具侵入岩石损伤破坏影响因素的理论分析及数值模拟

通过空腔膨胀理论研究楔形刀具几何参数（刃角）、岩石力学参数（抗压强度、泊松比）对刀具与岩石接触面下岩石弹-塑性交界面半径的影响。结果表明：刀具与岩石接触宽度一定时,刃角越小,岩体的损伤区域越大,从而导致弹-塑性交界面半径增大。在其他因素不变的前提下,岩石泊松比增大或者抗压强度增加都导致弹-塑性交界面半径减小。采用参数敏感性分析方法对3种影响因素的敏感性进行了分析,在接触宽度一定的条件下,刃角的大小对弹-塑性交界半径的影响最大。采用ABAQUS软件建立刀具侵入岩石的数值模型,研究表明,刃角的变化对文中定义的岩体内最大拉应力点空间位置以及最小梯度方向有着显著影响。     

液化场地桩-土地震相互作用p-y曲线分析方法研究

目前,我国尚缺乏液化场地桩-土-桥梁结构地震相互作用分析的合理数值模型与简化分析方法。鉴于此,直接针对振动台试验,基于非线性文克尔地基梁模型,考虑桩周参振土的质量惯性力、上部结构的惯性力、土体辐射阻尼等效应,建立了液化场地桩-土-桥梁结构地震相互作用的p-y曲线分析模型,并给出相应的简化方法。针对振动台试验进行了0.1g El Centro波输入下的分析,验证了桩-土地震相互作用分析方法的正确性,并且推荐了计算参数的合理选取方法,可用于液化场地桩-土地震相互作用的分析。提出的液化场地桩-土地震相互作用p-y曲线简化分析方法,为实际桥梁桩基抗震设计与分析提供一定参考。