Analysis of anisotropy of magnetic susceptibility in iron-oolitic beds: a potential tool for paleocurrent identification

A combined sedimentological, shape-preferred orientation and anisotropy of magnetic susceptibility (AMS) analysis has been performed at the Arroyofrío Bed (Callovian–Oxfordian boundary level) in the locality of Moneva (Iberian Range, NE Spain). The Arroyofrío bed is a widespread iron-ooid limestone interval forming a condensed sequence. The present study has focused on the analysis of the potential presence of a preferred ooid orientation at the Arroyofrío bed. The obtained data show that ooids were originally ellipsoidal and had an imbricate disposition with respect to the bedding/lamination surface. The main ooid orientation within the bedding plane shows a NNE–SSW trend. Results of AMS analyses show a magnetic foliation parallel or slightly imbricated with respect to bedding and magnetic lineation parallel to the main ooid orientation. Magnetic mineralogy of studied samples shows that AMS is mainly controlled by magnetite with minor contributions of hematite and paramagnetic minerals (that can reach contributions of 35 %). The analyzed ooids show axial ratios between 1.4 and 2.8 (intrinsic anisotropy), while the anisotropy of their distribution shows lower anisotropies (e.g., Rs = 1.15) or very low values of the anisotropic magnetic parameters (e.g., P′ < 1.01). Sedimentary texture, matrix features, bioturbation and fossil content influenced both ooid main orientation and the magnetic fabric. Magnetic lineation and main orientation of long ooid axes are transverse to the inferred coastline in the studied area and parallel to the expected paleocurrent direction with respect to the Ejulve-Maestrazgo paleogeographic high. The direct correlation between AMS magnetic lineation and the ooid analysis permits to demonstrate that the paleocurrent imprint can be recorded by means of AMS despite the highly ferromagnetic context fabric and at coarse deposits. Obtained results support the interest and reliability of AMS to unravel paleocurrent imprints for paleogeographic reconstructions.     

Tier-based approaches for landslide susceptibility assessment in Europe

In the framework of the European Soil Thematic Strategy and the associated proposal of a Framework Directive on the protection and sustainable use of soil, landslides were recognised as a soil threat requiring specific strategies for priority area identification, spatial hazard assessment and management. This contribution outlines the general specifications for nested, Tier-based geographical landslide zonings at small spatial scales to identify priority areas susceptible to landslides (Tier 1) and to perform quantitative susceptibility evaluations within these (Tier 2). A heuristic, synoptic-scale Tier 1 assessment exploiting a reduced set of geoenvironmental factors derived from common pan-European data sources is proposed for the European Union and adjacent countries. Evaluation of the susceptibility estimate with national-level landslide inventory data suggests that a zonation of Europe according to, e.g. morphology and climate, and performing separate susceptibility assessments per zone could give more reliable results. To improve the Tier 1 assessment, a geomorphological terrain zoning and landslide typology differentiation are then applied for France. A multivariate landslide susceptibility assessment using additional information on landslide conditioning and triggering factors, together with a historical catalogue of landslides, is proposed for Tier 2 analysis. An approach is tested for priority areas in Italy using small administrative mapping units, allowing for relating socioeconomic census data with landslide susceptibility, which is mandatory for decision making regarding the adoption of landslide prevention and mitigation measures. The paper concludes with recommendations on further work to harmonise European landslide susceptibility assessments in the context of the European Soil Thematic Strategy.     

Consequences of past climate change for species engaged in obligatory interactions

Obligatory interactions between species are fundamental to ecosystem functioning and are expected to be particularly sensitive to climate change. Although the effect of past and current climate changes on individual species has been thoroughly investigated, their effect on obligatory interactions has been overlooked. In this review, we present predictions about the effects of climate change on obligatory interactions and illustrate these predictions with examples from the literature. We focus on abrupt past climate change, especially during the Quaternary, because knowing past responses is useful for understanding and predicting the response of organisms and ecosystems to the current climate change. We also pinpoint the need for better time calibration of demographic events from genetic data, and for more studies focused on particularly suitable biological models. We hope that this review will stimulate interaction between the earth sciences and the life sciences on this timely topic.     

Performance enhancement of a GIS-based facility location problem using desktop grid infrastructure

This paper presents the integration of desktop grid infrastructure with GIS technologies, by proposing a parallel resolution method in a generic distributed environment. A case study focused on a discrete facility location problem, in the biomass area, exemplifies the high amount of computing resources (CPU, memory, HDD) required to solve the spatial problem. A comprehensive analysis is undertaken in order to analyse the behaviour of the grid-enabled GIS system. This analysis, consisting of a set of the experiments on the case study, concludes that the desktop grid infrastructure is able to use a commercial GIS system to solve the spatial problem achieving high speedup and computational resource utilization. Particularly, the results of the experiments showed an increase in speedup of fourteen times using sixteen computers and a computational efficiency greater than 87 % compared with the sequential procedure.     

Web-GIS tool for the management of rural land markets

Land abandonment and stagnation of rural markets in the last few years have become one of the main concerns of rural administrations. The use of Web and GIS (Geographic Information System) technologies can help to mitigate the effects of these problems. This paper pro-poses a novel Web-GIS tool with spatial capabilities for the dynamization of rural land markets by encouraging the transfer of land from owners to farmers through the leasing of plots. The system, based on open source software, offers information about the properties, their environment and their owners. It uses standards for handling the geographic information and for communicating with external data sources. This system was used as the basis for the development of SITEGAL, the tool for the management of the Land Bank of Galicia (www.bantegal.com/sitegal). SITEGAL has been operational since 2007 obtaining benefits for both administration and users (farmers and land owners), and promoting the e-Government.     

Study of a rockfall in a limy conglomerate canyon (Covarrubias, Burgos, N. Spain)

In this paper, a rockfall of some tenths of cubic metres of rock, occurred in a conglomerate canyon in the northern Castilian plateau (N-Central Spain), is described in detail. This includes the basic data (geology, mapping, meteorological data and rock involved), the mechanical mechanism of the instability, the propagation and reach of the fallen rock boulders and the final location of the pieces. The study is based on detailed geological, aerial photography and geotechnical studies and advance topographical measurements. Geological engineering techniques are used to analyze the instability initiation and rockfall propagation. This study contributes to a better understanding of the geological processes leading to the occurrence of calcareous canyons and cliffs in the drainage network of the upper Castilian plateau. It is also helpful to improve our knowledge on natural rockfall phenomena for risk engineering purposes aiming to quantify, control and mitigate associated hazards.     

GIS-based land suitability analysis integrating multi-criteria evaluation for the allocation of potential pollution sources

The geological environment has been heavily polluted by chemical substances over the past few decades. Pollution sources located on the earth’s surface or underground have affected the quality of the environment. A significant amount of impact could be reduced if the allocation of potential pollution sources was based on an evaluation of environmental conditions. The main objective of this study was to develop a methodology for the allocation of potential pollution sources by employing GIS and multi-criteria evaluation techniques. This methodology was applied to a study area located in the eastern part of Lithuania. A GIS-based land suitability analysis was performed after identifying 16 factors concerning the geological and socio-economic environment, which were important for environmental protection, land use and spatial planning. The environmental and socio-economic factors were divided into eliminating and limiting criteria. Criteria maps based on the selected factors were compiled. Areas delineated by eliminating criteria were identified as unsuitable for development (according to national legislation). Limiting criteria were evaluated according to the suitability level, which were determined in this study considering the principles of sustainable development. The relative importance of each criterion was assessed utilising the Analytical Hierarchy Process (AHP). A land suitability index (LSI) was calculated and the final result of the land suitability analysis was summarized in three suitability maps (environmental, socio-economic and composite). Four suitability classes (unsuitable, least, moderately and most suitable) for the allocation of potential pollution sources in the study area were used, and the nine most suitable candidate sites were selected according to the proposed methodology.     

Trends and evolution of contamination in a well-dated water reservoir sedimentary archive: the Brno Dam, Moravia, Czech Republic

The sedimentary record from dams can provide important information about stratigraphy and pollution history of densely populated river basins. The Brno Dam is a small reservoir within the Morava River catchment (Czech Republic) accumulating lacustrine sediments since 1940 (dam filling). The stratigraphy of the dam sediments was studied using multiproxy stratigraphic analysis (X-ray densitometry, bulk magnetic susceptibility, diffuse spectral reflectance and cation-exchange capacity) of five sediment cores supported by ground-penetration radar sections. Concentrations of heavy metals were studied by X-ray fluorescence analysis. The thickness of the dam sediments decreases from 220 cm in the proximal part, near the feeder, to only 10 cm in the distal part, near the dyke. Sediments consist predominantly of finely-laminated silty sands, silts and clays. The sedimentation rate for the last ~22 years, inferred from ¹³⁷Cs dating, decreases from 4.2 cm per year in the proximal part of the dam to 0.29 cm per year in its distal part. Distinct long-term trends were found in the depth profiles of heavy metal concentrations. The heavy metal contents increase significantly after 1940 in all cores, with peak concentrations confined to layers deposited in the 1960s and 1980s. A decreasing trend occurred after 1989 (the decline in Czech heavy industry). The results also show that heavy metal contamination is dependent on lithology (hyperpycnal flow layers related to floods). Increased concentrations of phosphorus in the sediments indicate long-term eutrophication of the dam. Despite the recent decreasing trends in heavy metal concentrations the phosphorus contents remain high in recent years and have caused persisting problems with algal growth in the dam mentioned by previous authors.     

Determination of ecological significance based on geostatistical assessment: a case study from the Slovak Natura 2000 protected area

The Sitno Natura 2000 Site covers an area of 935,56 hectares. The Sitno region is significant due to the number of rare and endangered species of plants, and as a result is considered a location of great importance to the maintenance of floral gene pools. The study area suffers human impacts in the form of tourism. The main purpose of this study is to the measure landscape elements, determine the ecological significance of habitats within the Sitno area, and from this data, organize the study area into conservation zones. The results of this landscape quantification are numerical values that can be used to interpret the quality of ongoing ecological processes within individual landscape types. Interpretation of this quantified data can be used to determine the ecological significance of landscapes in other study areas. This research examines the habitats of Natura 2000 Sites by a set of landscape metrics for habitat area, size, density, and shape, such as Number of patches (NP), Patch density (PD), Mean patch size (MPS), Patch size standard deviation (PSSD) and Mean shape index (MSI). The classification of land cover patches is based on the Annex Code system.     

Cation exchange capacity of loess and overlying soil in the non-carbonate loess sections, North-Western Croatia

The adsorption properties in terms of cation exchange capacity and their relation to the soil and sediment constituents (clay minerals, Fe-, Mn-, and Al-oxyhydroxides, organic matter) were investigated in loess, soil-loess transition zone, and soil at four loess-soil sections in North-Western Croatia. Cation exchange capacity of the bulk samples, the samples after oxalate extraction of Fe, Mn and Al, and after removal of organic matter, as well as of the separated clay fraction, was determined using copper ethylenediamine. Cation exchange capacity (pH～7) of the bulk samples ranges from 5 to 12 cmol _c /kg in soil, from 7 to 15 cmol _c /kg in the soil-loess transition zone, and from 12 to 20 cmol _c /kg in loess. Generally, CEC values increase with depth. Oxalate extraction of Fe, Mn, and Al, and removal of organic matter cause a CEC decrease of 3–38% and 8–55%, respectively, proving a considerable influence of these constituents to the bulk CEC values. In the separated clay fraction (<2 μm) CEC values are up to several times higher relative to those in the bulk samples. The measured CEC values of the bulk samples generally correspond to the clay mineral content identified. Also, a slight increase in muscovite/illite content with depth and the vermiculite occurrence in the loess horizon are concomitant with the CEC increase in deeper horizons, irrespective of the sample pretreatment.