Cratering and modification of wet‐target craters: Projectile impact experiments and field observations of the Lockne marine‐target crater (Sweden)

Abstract— Marine impacts are one category of crater formation in volatile targets. At target water depths exceeding the diameter of the impactor, the zones of vaporization, melting, and excavation of the standard land‐target cratering model develop partially or entirely in the water column. The part of the crater that has a potential of being preserved (seafloor crater) may to a great extent be formed by material emplacement and excavation processes that are very different from land‐target craters. These processes include a high‐energy, water‐jet‐driven excavation flow. At greater water depths, the difference in strength of the target layers causes a concentric crater to evolve. The crater consists of a wide water cavity with a shallow excavation flow along the seabed surrounding a nested, deeper crater in the basement. The modification of the crater is likewise influenced by the water through its forceful resurge to fill the cavity in the water mass and the seafloor. The resurge flow is strongly erosive and incorporates both ejecta and rip‐up material from the seabed surrounding the excavated crater. A combination of field observations and impact experiments has helped us analyze the processes affecting the zone between the basement crater and the maximum extent of the water cavity. The resurge erosion is facilitated by fragmentation of the upper parts of the solid target caused by a) spallation and b) vibrations from the shallow excavation flow and, subsequently, c) the vertical collapse of the water cavity rim wall. In addition, poorly consolidated and saturated sediments may collapse extensively, possibly aided by a violent expansion of the pore water volume when it turns into a spray during passage of the rarefaction wave. This process may also occur at impacts into water‐saturated targets without an upper layer of seawater present. Our results have implications for impacts on both Earth and Mars, and possibly anywhere in the solar system where volatiles exist/have existed in the upper part of the target.     

Analysis of the solar low-ℓ p-mode asymmetries using wavelets

It is presently widely accepted that the solar low p modes show asymmetric profiles when their power spectrum is analysed and that the fact of fitting symmetric profiles yields systematic effects in the obtained frequencies which could affect the results of inversions. In this paper the low p-mode profiles are analysed using wavelets to denoise the power spectra of the modes. This denoising method is applied both to artificial data generated by Kosovichev (the Hare and Hound exercise) and to real data obtained with the GOLF instrument. The asymmetries as well as the frequencies obtained are studied in both cases. The results show that although the obtained p-mode profiles present a slightly negative asymmetry, the use of symmetric profiles to fit the power spectra does not introduce any systematic effect in the obtained frequencies.     

Energy balance of simple elastodynamic sources

Complete relations are derived for energy and energy flux of elastic waves generated by an isotropic and double-couple source in a perfectly elastic, homogeneous, isotropic, and unbounded medium. In the energy balance of elastodynamic sources near-field waves play an essential role, transforming static energy into wave energy, andvice versa. For explosive and dislocation sources, the sources surface radiates a positive wave energy that is partially distributed to the medium transforming into static energy. For implosive and antidislocation sources, the source surface generates elastic waves, but it does not necessarily imply that it also radiates a positive wave energy. The energy transported by waves can originate in gradual transformation of the static-to-wave energy during propagation of waves through a stressed medium.On leave from Geophysical Institute, Czech Academy of Sciences, Boní II/1401, 41 31, Praha 4 Czech Republic     

Risk assessment of groundwater pollution using sensitivity analysis and a worst-case scenario analysis

This paper illustrates how sensitivity analysis and a worst-case scenario analysis can be useful tools in risk assessment of groundwater pollution. The approach is applied to a study area in Hungary with several known groundwater pollution sources and nearby drinking water production wells. The main concern is whether the contamination sources threaten the drinking water wells of the area. A groundwater flow and transport model is set up to answer this question. Due to limited data availability, the results of this model are associated with large uncertainty. Sensitivity analysis and a worst-case scenario analysis are applied to estimate this uncertainty and build confidence in the model results.     

The geochemistry of mafic metavolcanics: implications for the origin of the Devonian massive sulfide deposits at Zlaté Hory,Czechoslovakia

Mafic metavolcanic rocks in the area of the Zlaté Hory massive sulfide deposits are interpreted as convergent plate-margin basalts and basaltic andesites metamorphosed to the greenschist facies. According to the major- and trace-element compositions the metabasites exhibit island-arc tholeiitic to low-K, calc-alkaline composition.Approximately 50% of samples of maifc metavolcanics studied have a salient negative anomaly of Ce in chondrite-normalized REE patterns. The Ce-depleted greenschists are thought to represent hydrothermally altered equivalents of metabasites of island-arc tholeiitic composition. The alteration was accompanied by the sulfide mineralization. That is indicated by enrichment in Ba and S together with correlation of the Ce/Ce* values and CO₂ abundances in the Ce-depleted rocks. The Ce anomaly may be caused by alteraton of ore-forming, seawaterderived solutions. The occurrence of Ce-depleted greenschists supports the hypothesis of the volcanogenic origin of the ore deposits in the Zlaté Hory area.     

Infrared study of the pyrolysis products of sporopollenin and lignite

The effect of pyrolysis at increasing temperature on sporopollenin, lignite and sporopollenin oxidized at 200°C has been investigated using measured infrared band absorption coefficients.Oxidation of sporopollenin in air at 200°C is marked by a decrease in the content of saturated hydrocarbon chains and a strong increase in the concentration of carboxylic acid groups.Pyrolysis of a thick bed of sporopollenin at increasing temperatures leads to the removal of a large proportion of oxygenated functions, before the removal of hydrocarbons. For lignite and oxidized sporopollenin, the loss of both types of functional groups extends over a broader temperature range. Reorganization of the carbonaceous residue at high temperature is hindered if a sufficiently low content of oxygenated functions, carbonyl and carboxyl as well as hydroxyl and ether groups, is not reached before the elimination of hydrocarbons.     

Groundwater management by riverbank filtration and an infiltration channel: the case of Obrenovac, Serbia

The Vi? Bare groundwater source is used to supply water to the population and industry of Obrenovac, one of the municipalities of Belgrade (the capital of Serbia). It is a typical riverbank filtration site; exploitation is performed through 30 drilled wells and two radial wells located in the meander of the Sava River. The established hydraulic connection between the river and tapped aquifer is so great that the river regime has a dominant influence on the aquifer. As a consequence of this, water-delivery reduction occurs in the dry months (summer–autumn), when the population needs water the most. Based on the data associated with the river’s gauges, precipitation, quantity of pumped water and groundwater-level fluctuation, a simulation of the groundwater regime for non-steady-state flow conditions has been undertaken through a numerical model. To overcome problems of water shortage during the dry season, the possibility of artificial recharge using an infiltration channel, made up of two connected parts, was analyzed. During the dry months, 80 % of the wells receive water partly from the infiltration channel. In this way, possibilities for extracting additional water are created. The application of this concept is discussed.     

Geomorphic monitoring and response to two dam removals: rivers Urumea and Leitzaran (Basque Country,Spain)

Dam removal has been demonstrated to be one of the most frequent and effective fluvial restoration actions but at most dam removals, especially of small dams, there has been little geomorphological monitoring. The results of the geomorphological monitoring implemented in two dams in the rivers Urumea and Leitzaran (northern Spain) are presented. The one from the River Urumea, originally 3.5 m high and impounding 500 m of river course, was removed instantaneously whereas that in the River Leitzaran, 12.5 m high, and impounding 1500 m of river course, is in its second phase of a four‐stage removal process. Changes in channel morphology, sediment size and mobility and river bed morphologies were assessed. The monitoring included several different techniques: topographical measurements of the channel, terrestrial laser scanner measurements of river bed and bars, sediment grain size and transport; all of them repeated in four (May, August, November 2011 and May 2012) and five (July and September 2013, April and August 2014 and June 2015) fieldwork campaigns in the River Urumea and River Leitzaran, respectively. Geomorphic responses of both dam removals are presented, and compared. Morphological channel adjustments occurred mainly shortly after dam removals, but with differences among the one removed instantaneously, that was immediate, whereas that conducted by stages took longer. Degradational processes were observed upstream of both dams (up to 1.2 m and 4 m in the River Urumea and River Leitzaran, respectively), but also aggradational processes (pool filling), upstream of Inturia Dam (2.85 m at least). Less evident aggradational processes were observed downstream of the dams (up to 0.37 m and 0.50 m in the River Urumea and River Leitzaran, respectively). Flood events, especially a 100 year flood registered during the monitoring period of Mendaraz Dam removal, reactivated geomorphological processes as incision and bank erosion, whereas longitudinal profile recovery, grain‐size sorting and upstream erosion took longer. Copyright © 2016 John Wiley & Sons, Ltd.     

Heavy metals pollution of aquatic ecosystems in the vicinity of a recently closed underground lead-zinc mine (Basque Country, Spain)

A presentation is made of the study of an underground polymetallic sulphide mine and the pollution caused by this in the adjoining aquatic ecosystems. Troya Mine is in the Basque Cantabrian region (northern Spain). The annual production of the ore deposit of over 3.7 million tons of Pb (0.9%), Zn (11.2%) and Cu (0.2%) was 300,000 t. It was open and producing from 1986-1993. The mineralization was made up of pyrite, marcasite, sphalerite, galena, chalcopyrite and arsenopyrite. Only the Zn and the Pb were mined. We studied the distribution and behaviour of the heavy metals Zn, Pb, Fe, Mn, Cu, Cr and Cd in the water column, dissolved and suspended fractions, and in the sediments of Estanda Stream and of Gezala Creek. Zn, Cd and Mn tend to be found in the water; Fe, Pb, Cu and Cr appear as an adsorbed fractionin the solid phases. Those of the second group are significantly linked to the fluvial sediments and present very high levels. The concentrations of the metals are conditioned by the waters from the mine galleries, by the leached waste, by the surface runoff, and by overflow from the spillway of the tailings pond. Our observations provide knowledge on the extent of the polluting power of the metals, the physico-chemical effects in play and the subsequent chances of recovering these highly affected environments.     

Anthropogenic influence on trace element geochemistry of healing mud (peloid) from Makirina Cove (Croatia)

Due to their balneotherapeutic features, the organic-rich sediments in Makirina Cove are an important source of healing mud. An environmental geochemistry approach using normalization techniques was applied to evaluate the anthropogenic contribution of trace metals to sediments used as healing mud. Sediment geochemistry was found to be associated with land-use change and storm events, as well as with proximity of a road with heavy traffic in the summer months. Local valley topography preferentially channels lithogenic and pollutant transport to the cove. Concentrations and distribution of trace metals indicate lithogenic (Ni, Cr, Co) and anthropogenic (Pb, Cu, Zn and Se) contributions to the sediments. The calculation of enrichment factors indicates a moderate (EFs between 2–3.5) input of anthropogenic Cu and Pb in surficial sediments to a depth of 10 cm. Patients using the Makirina Cove sediments as healing mud could be to some extent exposed to enhanced uptake of metals from anthropogenic sources via dermal contact.