强潮流作用下桥墩不对称“双肾型”冲刷地貌特征与机理

本文在海图地形资料分析桥轴线附近的海床自然冲刷的基础上,利用多波束测深技术研究大桥主墩附近局部冲刷地形。结果表明,该大桥桥位附近地形冲刷较显著,且大桥主墩位置有持续冲刷的趋势;主墩上、下游群桩最大冲刷深度呈上游最深、中部淤积、下游渐深的不对称形态,最大局部冲刷深度为4 m;桥墩整体冲刷坑形态呈南北“双肾型”;潮流流向与桥墩迎流面存在偏南的入射角,使得各桥墩南侧的最大冲深和冲刷范围均大于北侧。     

我国海平面年速率的分布和长周期分潮的变化

应用验潮站潮汐资料计算海平面年速率,绘出我国海平面年速率和等值线分布图并进行讨论,分析了我国海平面长周期分潮的变化。     

An ecological study on the fouling organisms in Yantai Harbour

Yantai Harbour (37°33′15″N , 121°23′42″E) is situated at the north coast of Shandong Peninsula and is a large fishing and commercial port of North China. From June 1983 to May 1984, a yearly panel test on fouling organisms was carried out at the non-fixed jetties in the inner and outer harbour. The test method was according to "the Marine Survey     

黄河口及渤海中南部沉积物工程特性及其机理

采用Ｋａｓｔｅｎ取样器从黄河口及渤海湾中南部海底沉积物中取样，对样品通过土工性质、微结构研究以及粘土矿物分析，阐明本研究区三维空间展布的海底沉积物形成机理及其工程地质规律，论证水动力作用和斜坡不稳定性对工程特性和微结构的重要影响．     

福建南部沿海的江豚

在闽南厦门至漳浦沿海获22只江豚,根据背部棘状小结节的数量与分布,可明显分为两个亚种,即指名亚种(N.P.Phocaenoides,81%)和北方亚种(N.P.Sunameri,19%),表明本海域是几个亚种的混栖地带,分析了这些江豚的外部形态和种群结构,测定了脂肪层及各内脏的重量.     

盐碱水NaCl浓度和碱度对银鲫(Carassius auratus gibelio)幼鱼毒性的初步研究

通过对银鲫(Carassiusauratusgibelio)幼鱼(L=3.56±0.28cm)的NaCl浓度(pH=8.80±0.10)及碱度(pH=8.84±0.26)的急性毒性试验，用概率单位法求得其24，48，96h的半致死浓度(LC50值)NaCl浓度分别为11.53、10.77、8.58g/L；碱度分别为98.74、79.49、64.19mmol/L。在此基础上采用水生毒理联合效应相加指数法进行了氯化钠与碳酸氢钠浓度的联合毒性实验(浓度=11)，结果在96h内二者的关系全部为协同作用,且其协同性逐渐减弱并趋向于相加作用。     

去冬渤海及黄海北部海域冰情严重

去年入冬以来,我国大部分地区连续受冷空气的影响,气温比常年有显著的下降趋势,从而也导致了渤海及黄海北部海域冰情较为严重.根据海洋观测站、遥感中心、航空监测的实测资料以及NOAA卫星图像分析:辽东湾、渤海湾、莱州湾及黄海北部流冰范围分别在90海里、20海里、5海里、25海里内;最大冰厚分别是50厘米、25厘米、15厘米、30厘米;结冰类型大部分是灰冰、莲叶冰、冰皮和少量的灰白冰.今年该海域的结冰现象是近十几年来最为严重的一年.     

First arrival cycle-based calculation methods of in situ sound speed and attenuation in sediments

The acoustic properties of seafloor sediments are of great importance in geoacoustic modeling, detecting, and oceanic engineering. The methods based on the first arrival cycle are investigated to calculate sound speed and attenuation of sediment more precisely in in situ measurements. The comparison of different data analysis methods based on the first arrival cycle approach for in situ measurement results in the following conclusions: (1) the calculated methods can help find the effective cycles and reduce the errors in calculating sound speed and attenuation; (2) using this approach, the point judgment method-based data analysis has the same effectiveness as the cross-correlation method-based data analysis in calculating group sound speed and has the same effectiveness in calculating attenuation in the time domain as the spectrum analysis method-based data analysis has in calculating attenuation in frequency domain; and (3) measurement in water can help not only calibrate the transmitting distance but also can calculate the time delay for the sound speed and the attenuation loss in the transmitting process. Finally, theoretical calculation was used to calculate the measured results, indicating a good agreement, which supports that first arrival cycle-based calculated methods can be used to analyze the measured data and the effective density fluid model can be used to analyze more acoustic properties and invert several physical properties in this experiment.     

On the radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas

The radiation and diffraction of linear water waves by an infinitely long rectangular structure submerged in oblique seas of finite depth is investigated. The analytical expressions for the radiated and diffracted potentials are derived as infinite series by use of the method of separation of variables. The unknown coefficients in the series are determined by the eigenfunction expansion matching method. The expressions for wave forces, hydrodynamic coefficients and reflection and transmission coefficients are given and verified by the boundary element method. Using the present analytical solution, the hydrodynamic influences of the angle of incidence, the submergence, the width and the thickness of the structure on the wave forces, hydrodynamic coefficients, and reflection and transmission coefficients are discussed in detail.