Titan's surface at 2.2-cm wavelength imaged by the Cassini RADAR radiometer: Calibration and first results

The first comprehensive calibration and mapping of the thermal microwave emission from Titan's surface is reported based on radiometric data obtained at 2.2-cm wavelength by the passive radiometer included in the Cassini Radar instrument. The data reported were accumulated from 69 separate observational segments in Titan passes from Ta (October 2004) through T30 (May 2007) and include emission from 94% of Titan's surface. They are diverse in the key observing parameters of emission angle, polarization, and spatial resolution, and their reduction into calibrated global mosaic maps involved several steps. Analysis of the polarimetry obtained at low to moderate resolution (50+ km) enabled integration of the radiometry into a single mosaic of the equivalent brightness temperature at normal incidence with a relative precision of about 1 K. The Huygens probe measurement of Titan's surface temperature and radiometry obtained on Titan's dune fields allowed us to infer an absolute calibration estimated to be accurate to a level approaching 1 K. The results provide evidence for a surface that is complex and varied on large scales. The radiometry primarily constrains physical properties of the surface, where we see strong evidence for subsurface (volume) scattering as a dominant mechanism that determines the emissivity, with the possibility of a fluffy or graded-density surface layer in many regions. The results are consistent with, but not necessarily definitive of a surface composition resulting from the slow deposition and processing of organic compounds from the atmosphere.     

Valence state partitioning of V between pyroxene‐melt: Effects of pyroxene and melt composition,and direct determination of V valence states by XANES. Application to Martian basalt QUE 94201 composition

Abstract— Experiments on a Martian basalt composition show that D_v augite/melt is greater than D_v pigeonite/melt in samples equilibrated under the same fO₂ conditions. This increase is due to the increased availability of elements for coupled substitution with the V³⁺ or V⁴⁺ ions, namely A1 and Na. For this bulk composition, both A1 and Na are higher in concentration in augite compared with pigeonite; therefore more V can enter augite than pigeonite. Direct valence state determination by XANES shows that the V³⁺ and V⁴⁺ are the main V species in the melt at fO₂ conditions of IW‐1 to IW+3.5, whereas pyroxene grains at IW‐1, IW, and IW+1 contain mostly V³⁺. This confirms the idea that V³⁺ is more compatible in pyroxene than V⁴⁺. The XANES data also indicates that a small percentage of V²⁺ may exist in melt and pyroxene at IW‐1. The similar valence of V in glass and pyroxene at IW‐1 suggests that V²⁺ and V³⁺ may have similar compatibilities in pyroxene.     

Partially Fused Granite Blocks from Mt. Elephant, Victoria, Australia

Petrological and chemical evidence is presented to show thatsmall patches of brown glass found in blocks of granite eruptedin basaltic scoria at Mt. Elephant are the result of the partialfusion of biotite and quartz. The glass has moderate SiO₂ (63–66per cent), high AI₂O₃ (17.5–19 per cent), high FeO (3.8–5.2per cent) and very high K₂O (7.0–7.8 per cent) relativeto Na₂O (3.3–3.7 per cent) and is similar in compositionto many high K alkali syenites and trachytes.     

Tremblements de terre et anomalies magnétiques

Résumé On a déjà souvent signalé que le champ magné ique terrestre s'est trouvé modifié de fa?on durable à la suile de mouvements séismiques. L'auteur rappelle plusieurs exemples récents d'anomalies magnétiques mesurées au Japon à la suite d'importants séismes (Kato). L'anomalie magnélique duBassin de Paris se déforme dans le temps en liaison possible avec des déplacements magmatiques et une activité séismique avortée. Le séisme du 11 juin 1938 en Belgique montre d'intéressants rapports avec l'anomalie magnétique belge. Les cartes isoporiques mondiales présentent des relations avec les cartes de séismicité (Omer). L'auteur pense que séismes et déformations du champ magnétique terrestre sont plus ou moins étroitement liés et que peut être une réaction atomiqueen chaine peut expliquer les séismes orogéniques et leurs répliques.

---

Summary It was yet often noted that the earth's magnetic field has been steadily modified on the result of seismic earth movements. The author cites many recent examples of magnetic anomalies measured in Japan after major earthquakes (Kato). The ?Bassin de Paris?'s magnetic anomaly is modified during a certain time in a possible connection with magmatic removals and with some seismic activity. The earthquake of June 11 th., 1938 in Belgium shows some very interesting connections with the belgian magnetic anomaly. Suggestive relationships are noted between changes in the earth's secular magnetic field and areas of seismicity (Omer). The author thinks that the earthquakes and the deformations of the earth's magnetic field are more or less closely connected one with another, and it may perhaps be that the atomic energy (chain reactions) may explain some orogenic earthquakes and their aftershocks.

     

Konstruktive und thermodynamische Eigenschaften des Piche-Evaporimeters

Zusammenfassung Im ersten Teil der Arbeit werden der Einfluß von Temperaturänderungen auf die Anzeige des Piche-Evaporimeters und der Einfluß des Lochdurchmessers im Filterpapier auf den Unterdruck im Rohr untersucht. In beiden Fällen ergibt sich eine sehr gute Übereinstimmung zwischen dem experimentellen Ergebnis und entsprechenden theoretischen Überlegungen.Messungen der Verdunstung des Piche-Evaporimeters, bei denen die Strahlung durch eine äquivalente elektrische Heizung des Filterpapiers ersetzt wurde, erlauben zusammen mit den Messungen der übrigen für die Verdunstung maßgebenden Parameter die Bestimmung der Wärmeübergangszahl des Filterpapierblättchens des Piche-Evaporimeters als Funktion der Windgeschwindigkeit. Das dabei gefundene Potenzgesetz, welches weitgehend den aus der Literatur bekannten Formeln für die Wärmeübergangszahl folgt, ermöglicht es, die Verdunstung und die Mitteltemperatur des Filterpapiers des Piche-Evaporimeters mit Hilfe der vonG. Hofmann angegebenen Formeln und der in ihnen auftretenden meteorologischen Parameter (Lufttemperatur, Windgeschwindigkeit, Strahlungsbilanz, relative Luftfeuchtigkeit) zu errechnen. Auch hier ergibt sich eine sehr gute Übereinstimmung der berechneten Werte mit den gemessenen, so daß die Abhängigkeit der Meßwerte eines Piche-Evaporimeters von den für dessen Anzeige maßgebenden Parametern hinreichend geklärt erscheint.

---

Summary First are investigated the effect of temperature variations on the readings of a Piche evaporimeter, and the effect of the size of the hole pierced into the filter paper on the underpressure within the tube. In both cases good agreement is found between experimental results and theoretical considerations.The heat transfer coefficient of the filter paper as a function of wind velocity was ascertained by observing evaporation and the pertinent parameters; radiation, however, was replaced by an equivalent electric heating of the filter paper. The relationship follows a power law and corresponds largely with other formulae given in the literature. By applyingG. Hofmann's formulae (containing air temperature, wind velocity, net radiation, and relative humidity) the relationship can be used to calculate the mean temperature of the filter paper and the amount of evaporation. The agreement between calculated and observed results is very good. It seems, therefore, that the relationship between the Piche evaporimeter readings and the meteorological parameters governing its reactions is sufficiently clarified.

---

Résumé On étudie tout d'abord l'influence des variations de température sur les indications de l'évaporimètre de Piche, ainsi que l'effet du diamètre du trou du papier-filtre sur la dépression du tube. Dans les deux cas la théorie et l'expérience sont parfaitement d'accord.En mesurant ensuite l'évaporation de l'instrument exposé à un chauffage électrique équivalent à la radiation et en tenant compte des autres paramètres, on peut déterminer le coefficient de transfert de chaleur du filtre en fonction de la vitesse du vent. La loi exponentielle trouvée qui correspond bien aux formules connues pour le transfert de chaleur, permet alors de calculer l'évaporation et la température moyenne du filtre à l'aide des formules données parG. Hofmann et des paramètres météorologiques (température de l'air, vitesse du vent, bilan radiatif, humidité relative). Là aussi, l'accord entre la théorie et l'expérience est très satisfaisant, ce qui établit convenablement et de façon suffisante le lien entre les indications de l'évaporimètre de Piche et les conditions d'expérience.

---

Mit 10 TextabbildungenTeil einer Diplomarbeit für Meteorologie an der Universität München (1959).     

Geostrophic Wind, Gradient Wind, Thermal Wind And The Vertical Wind Profile – A Sample Analysis Within A Planetary Boundary Layer Over Arctic Sea-Ice

For the interpretation of many boundary-layer field experiments the geostrophic wind is needed as an external parameter. However, quite often and especially in remote areas this wind is not known at all or difficult to determine because there are not enough measurements of the surface pressure.Here it is shown how measurements carried out with the HELIPOD system, a helicopter-borne meteorological turbulence measuring system, may be used to evaluate the geostrophic wind. This is done by the analysis of the pressure field at different heights. An additional analysis of the temperature field in the same heights allows for the discussion of the quality of the derived geostrophic wind. An intercomparison with the vertical wind profile enables us to discuss the influence of the curvature of the isobars. From this, finally, also the gradient wind can be estimated.     

The Euro3D data format: A common FITS data format for integral field spectrographs

As integral field spectrographs have become more common around the world and in Europe in particular, the need for a common data format has been recognized. Here, we present the Euro3D format that is adapted as a post‐instrumentalsignature‐removal format for all instruments within the Euro3D network. It follows the FITS standard, and includes several extensions, all of them being binary FITS tables. This article is intended to give a comprehensive overview, but does not attempt to serve as a full definition document. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

考虑流固耦合效应的单桩式海上风电机组结构响应模拟

针对海上风电整机系统,建立了一体化流固耦合分析方法。在模拟过程中,采用浸入边界法解决风机叶片旋转引起的静动干涉问题,利用改进的守恒式 level set（简称 ICLS）方法捕捉海浪自由面,并使用交错迭代法求解流固耦合方程。通过构建 “风机—塔架—基础”一体化流固耦合数值模拟方法,能够在一次仿真计算中实现海上风电整机系统的全过程数值模拟,准确求解多荷载耦合作用下“风机—塔架—基础”的整体结构动力响应。以某单桩式海上风电工程为例,验证了本方法能够实现对海上风电整体系统的一体化分析。