Improved Resolution of Ambient Flow through Fractured Rock with Temperature Logs

In contaminant hydrogeology, investigations at fractured rock sites are typically undertaken to improve understanding of the fracture networks and associated groundwater flow that govern past and/or future contaminant transport. Conventional hydrogeologic, geophysical, and hydrophysical techniques used to develop a conceptual model are often implemented in open boreholes under conditions of cross-connected flow. A new approach using high-resolution temperature (±0.001°C) profiles measured within static water columns of boreholes sealed using continuous, water-inflated, flexible liners (FLUTe™) identifies hydraulically active fractures under ambient (natural) groundwater flow conditions. The value of this approach is assessed by comparisons of temperature profiles from holes (100 to 200 m deep) with and without liners at four contaminated sites with distinctly different hydrogeologic conditions. The results from the lined holes consistently show many more hydraulically active fractures than the open-hole profiles, in which the influence of vertical flow through the borehole between a few fractures masks important intermediary flow zones. Temperature measurements in temporarily sealed boreholes not only improve the sensitivity and accuracy of identifying hydraulically active fractures under ambient conditions but also offer new insights regarding previously unresolvable flow distributions in fractured rock systems, while leaving the borehole available for other forms of testing and monitoring device installation.     

Impact of Sea-level Rise and Storm Surges on a Coastal Community

A technique to evaluate the risk of storm tides (the combination of a storm surge and tide) under present and enhanced greenhouse conditions has been applied to Cairns on the north-eastern Australian coast. The technique combines a statistical model for cyclone occurrence with a state-of-the-art storm surge inundation model and involves the random generation of a large number of storm tide simulations. The set of simulations constitutes a synthetic record of extreme sea-level events that can be analysed to produce storm tide return periods. The use of a dynamic storm surge model with overland flooding capability means that the spatial extent of flooding is also implicitly modelled. The technique has the advantage that it can readily be modified to include projected changes to cyclone behaviour due to the enhanced greenhouse effect. Sea-level heights in the current climate for return periods of 50, 100, 500 and 1000 years have been determined to be 2.0 m, 2.3 m, 3.0 m and 3.4 m respectively. In an enhanced greenhouse climate (around 2050), projected increases in cyclone intensity and mean sea-level see these heights increase to 2.4 m, 2.8 m, 3.8 m and 4.2 m respectively. The average area inundated by events with a return period greater than 100 years is found to more than double under enhanced greenhouse conditions.     

Arsenic anomalies in shallow Venetian Plain (Northeast Italy) groundwater

A pilot area within the Venetian Plain was selected to assess the arsenic (As) contamination of groundwater. The area represents a typical residential, industrial and agricultural organization representative of most western countries, and is also devoid of lithologies with high or anomalous As content. Hydrogeological and chemical data have been collected, the latter spatialized by a geostatistical approach. The unconfined aquifer reservoir varies from a predominantly gravel composition in the north to a sandy and silt–clay composition further south, including peat layers. The hydrochemical features of the waters are rather homogeneous, featuring low mineral content and a Ca-bicarbonate signature. In contrast, the redox state is highly variable; oxidizing conditions are predominant in the northern and coarse parts of the aquifer, whereas reducing potentials prevail in the southern and silt–clay parts. Several well waters contain arsenic in excess of drinkable limits (=10 ppb), and most of these wells are located in the southern area. A large portion of the studied area has a high probability of containing non-potable water (up to 150 ppb As). Remarkably, As “hot spots” (As > 300 ppb, up to 431 ppb) were identified at the transition from gravel to silt–clay sediments. No industrial or agricultural source of As has been found.     

The use of acidimetric titration as a novel approach to study particulate trace metal speciation and mobility: Application to sediments of the Scheldt estuary

The study of trace metal speciation has benefited from a great deal of interest leading to the development and the diversification of sequential extraction schemes (SES), which triggered the need for harmonization by the standard, measurements and testing programme (SM & T). However, some uncertainties still persist in the application of the harmonized 3-step protocol, because of the difficulty in conceptualizing a technique that can be applied to environmental samples irrespective of their nature. The alternative method proposed in this study is based on the solubility of the sample components progressively dissolved during the course of an acidimetric titration by 1 mol L⁻¹ HCl. The major HCl-reactive mineralogical components are identified using mass balance calculation of H⁺ consumed by their dissolution together with the amount of major elements released into solution. The speciation of minor and trace elements is investigated by comparing their titrations to those of the major elements. This approach is much simpler than SES because it uses simple non-selective H⁺ at room temperature instead of a complex experimental design of so-called specific reagents. The different mineral components of the solid are no longer operationally defined and the problem of selectivity is irrelevant to the titration approach. The method was applied to several sediment samples from the Scheldt estuary and the particulate phase was further examined by Scanning Electron Microprobe and X-ray Diffraction techniques. The nearly complete consumption of H⁺ in the suspension is balanced by the total dissolution of carbonates and Fe-oxyhydroxides. In contrast to the speciation inferred from the Tessier SES, the acidimetric titration has demonstrated that the carbonate phase does not significantly contain trace metals with the exceptions of 40% of the Mn and 30% of the Co. In contrast, the Fe-oxyhydroxides seem to play a major role and account for 70% of Pb and 20% of Cr, in addition to 60% of P and additional amounts of 20% Co and 40% Mn. 70% of the Cu also occur in the oxyhydroxide phase, more likely coprecipitated with gibbsite. 90% of the Cd and 85% of Zn can be attributed to the Acid Volatile Sulfide (AVS) phase as evidenced from S titration. The acidimetric titration method not only provides information on the speciation of trace metals but also allows the quantification of their reactivity and mobility, if one considers that the titration roughly mimics pH changes that may occur as a result of chemical disequilibrium in the environment. The results demonstrate the potential of the acidimetric titration as an alternative to SES protocols in geochemical and environmental regulation studies. This method is applicable to a wide variety of environmental materials with little or minor adjustments.     

Saturn's electrostatic discharges: Could lightning be the cause?

It is proposed that Saturn's electrostatic discharges (SED) might be generated in the planet's equatorial atmosphere, perhaps as lightning from a storm system. The 10^h10^m periodicity of the signal envelope duplicates that of Saturn's equatorial jet. The rings shield the atmosphere from solar EUV photons, and thereby substantially reduce the local ionospheric cutoff frequency to allow low-frequency SED to leak out. Many of the unusual properties of SED could be explained in terms of changes in the storm system, the relative spacecraft position in the beaming pattern of the source, local refraction of the signal by the highly disturbed ionosphere, and the influence of the ring particles on the highest frequency component of SED. A comparison of SED with planetary lightning on other planets shows that the two are similar in general character and some time behavior; the power output of SED may be higher than most planetary lightnings but that is unclear because of uncertainties in the measurements and variations in the signal's spectrum. Our simple discussion suggests that lightning could be a viable source for SED and that exotic ring mechanisms are not necessarily required.     

Laboratory study of deep-water breaking waves

In an attempt to elucidate the mechanics of deep-water wave breaking, a variety of breaking waves, including spilling and plunging waves, of different length scales and geometries was studied. The waves were generated through wave-wave interactions using wave packets with constant-steepness components, constant-amplitude components, and also components following the Pierson-Moskowitz distribution. Wave steepening prior to breaking were found to cause an increase in the high frequency spectral slope of the wave spectrum. The slopes were correlated to the type of breaking and the intensity of the breaking. The energy loss through breaking varied with the spectral characteristics of the wave packet. On the other hand, it was also noted that, irrespective of the wave packet, the losses were from the higher frequency end of the first harmonics.     

Biosorption of Rare-Earth Elements and Yttrium by Heterotrophic Bacteria in an Aqueous Environment

This paper reports the results of the experimental determination of the coefficient of sorption of rare-earth elements and yttrium (REY) under conditions of acidic pH using several strains of heterotrophic bacteria (Microbacterium sp., Curtobacterium sp., Bacillus subtilis, Pseudomonas putida, and Bacillus pumilis) that are widespread in natural and technogenic waters of the Far East (Russia). Insignificant fractionation between heavy and light rare-earth elements, negative cerium and dysprosium anomalies, and a positive europium anomaly were revealed. The selectivity of REY biosorption by gram-positive and gram-negative bacteria, as well as inertia of the biosorption process under more acidic conditions of the medium, were shown.