Laboratory Study of Topographic Effects on the Near-surface Tornado Flow Field

To study topographic effects on the near-surface tornado flow field, the Iowa State University tornado simulator was used to simulate a translating tornado passing over three different two-dimensional topographies: a ridge, an escarpment and a valley. The effect of the translation speed on maximum horizontal wind speeds is observed for translation speeds of 0.15 and 0.50 \(\hbox {m}\,\hbox {s}^{-1}\), with the lower value resulting in a larger maximum horizontal wind speed. The tornado translation over the three topographies with respect to flat terrain is assessed for changes in: (a) the maximum horizontal wind speeds in terms of the flow-amplification factor; (b) the maximum aerodynamic drag in terms of the tornado speed-up ratio; (c) the maximum duration of exposure at any location to high wind speeds of a specific range in terms of the exposure amplification factor. Results show that both the maximum wind amplification factor of 14%, as well as the maximum speed-up ratio of 14%, occur on the ridge. For all topographies, the increase in aerodynamic drag is observed to be maximized for low-rise buildings, which illustrates the importance of the vertical profiles of the horizontal wind speed near the ground. The maximum exposure amplification factors, estimated for the range of wind speeds corresponding to the EF2 (50–60 \(\hbox {m}\,\hbox {s}^{-1}\)) and EF3 (61–75 \(\hbox {m}\,\hbox {s}^{-1})\) scales, are 86 and 110% for the ridge, 4 and 60% for the escarpment and ? 6 and 47% for the valley, respectively.     

Ultraviolet absorption spectra of some Br-containing haloalkanes

The ultraviolet absorption cross sections were measured for CF₃Br, CF₂ClBr, CF₂Br-CF₂Br, CF₂Br₂, CHF₂Br, CHFBr-CF₃, CH₂Br-CF₃, CHClBr-CF₃ in the wavelength range 190–320 nm at 295 K. The photolysis is concluded to be the minor atmospheric sink for CHF₂Br, CHFBr-CF₃, CH₂Br-CF₃, CHClBr-CF₃.     

Extinction in a photo-electric nucleus counter using adiabatic expansion of 1.21 pressure ratio achieved by increasing or decreasing the original pressure

Summary Comparisons were made of the extinctions as measured with a photoelectric condensation nucleus counter, Dublin School of Cosmic Physics Model 1957, when the «over-pressure method» or the «under-pressure method» with equal pressure expansion ratios were used for producing the adiabatic cooling of the sample in, the fogtube of the counter. Due to theSchlarb effect the extinction measured by the second method is smaller than that by the first. Tables and graphs for converting the extinction obtained by one method into that by the other are given. The advantages of the underpressure method are given and discussed.

---

Zusammenfassung Es wird über die Vergleichung der Extinktionen, welche mit einem photo-elektrischen Kondensationskernzähler Modell 1957 der Schule für kosmische Physik in Dublin gemessen werden, berichtet, wenn, bei gleichem Druckexpansions-Verhältnis, die Druckerhöhungs- oder die Expansionsmethode in ein partielles Vakuum für die Erzeugung der adiabatischen Abkühlung der im Nebelrohr des Kernzählers eingeschlossenen Aerosolprobe benützt wird. Wie erwartet, ist als Folge desSchlarb-Effektes die mit der zweiten Methode gemessene Extinktion kleiner. Tabellen und Kurven werden mitgeteilt, welche die Umwandlung der mit der einen Methode erhaltenen Extinktion in jene der anderen ermöglichen, und die Vorteile der Vakuum-Expansions-Methode diskutiert.

---

---

The research reported in this article has been supported in part by the Geophysics Research Directorate of the Air Force Cambridge Research Laboratories, through the European Office of the Air Research Division, United States Air Force under Contract AF 61 (052)-26 and by the Instrumentation Engineering Physics & Analysis Laboratory of the General Electric Co. Schenectady, New York under Retainer Agreement.     

Isotopic and other geochemical evidence for the origin of the Loch Uisg Granophyre,Isle of Mull,Scotland

Full chemical analyses, including some trace elements and both oxygen and strontium isotope abundance data are presented for samples collected from a traverse across the outcrop of the early Tertiary Loch Uisg Granophyre. Chemically, the body is rhyodacite with very uniform major and trace element composition. In contrast, depleted δ¹⁸O values vary widely from +1.5‰ in the south to ?3.7‰ in the north (a distance of about 21/2 km), a range comparable to that for the intrusive rocks of Mull as a whole. This indicates more extensive groundwater interaction (i.e. higher water/rock ratios and/or higher temperatures of isotope exchange) towards the focus of the central intrusive complex. There is some degree of correlation between δ¹⁸O and iron oxidation ratios but no other evidence that the primary igneous geochemistry of these rocks has been significantly modified by hydrothermal alteration after emplacement of the pluton. Initial⁸⁷Sr/⁸⁶Sr ratios range from 0.71350 ± 9 to 0.71624 ± 6 and correlate with both Rb content and Rb/Sr ratio, the latter correlation yielding a pseudo-isochron of 260 ± 54 Ma at the time of emplacement. These results confirm a major contribution from an old crustal source region, ruling out formation of the granophyre solely from a basic parent magma. However, Rb-Sr data are presented for the Moine schists exposed in Mull and Morvern which also appear to rule out their involvement in the petrogenesis of the granophyre, either as a source region for melting, or as a bulk contaminant for a mantle-derived magma. The only viable hypotheses are assimilation at depth of? Lewisian into a basaltic fractionation sequence or partial melting of a Proterozoic basement such as that involved in the production of Caledonian granites in the Scottish Highlands.     

Fractal analysis of magnetite grains — implications for interpreting deformation mechanism

In the present study, the grain size (d) and shape of 225 magnetite grains, that crystallized at T>600°C in a syntectonic granite (Godhra Granite, India) are evaluated and implications of data to decipher deformation mechanism of magnetite are discussed. Fractal (ruler) dimension (D) analysis of magnetite grains is performed and it is demonstrated that they show fractal behaviour. Smaller magnetite grains tend to be more serrated than the larger ones, which is manifested in the higher fractal (ruler) dimension (D) of the former. Assuming a natural strain rate ranging between 10⁻¹⁰ s⁻¹ and 10⁻¹⁴ s⁻¹, the grain size data fall dominantly in the dislocation creep field of the existing deformation mechanism map of magnetite for 630°C. However, SEM-EBSD studies reveal that subgrains are absent in the magnetite grains and they did not undergo dislocation creep. Thus it is inferred that the shape of magnetite grains was not controlled by dislocation creep. It is concluded that the higher serration and increased fractal dimension of finer magnetite grains implies the importance of diffusion creep as an important deformation mechanism at high-T for magnetite in polymineralic rocks.     

Integrated methodology for flood risk assessment and application in urban communities of Pakistan

Flood disasters and its consequent damages are on the rise globally. Pakistan has been experiencing an increase in flood frequency and severity along with resultant damages in the past. In addition to the regular practices of loss and damage estimation, current focus is on risk assessment of hazard-prone communities. Risk measurement is complex as scholars engaged in disaster science and management use different quantitative models with diverse interpretations. This study tries to provide clarity in conceptualizing disaster risk and proposes a risk assessment methodology with constituent components such as hazard, vulnerability (exposure and sensitivity) and coping/adaptive capacity. Three communities from different urban centers in Pakistan have been selected based on high flood frequency and intensity. A primary survey was conducted in selected urban communities to capture data on a number of variables relating to flood hazard, vulnerability and capacity to compute flood risk index. Households were categorized into different risk levels, such as can manage risk, can survive and cope, and cannot cope. It was found that risk levels varied significantly across the households of the three communities. Metropolitan city was found to be highly vulnerable as compared to smaller cities due to weak capacity. Households living in medium town had devised coping mechanisms to manage risk. The proposed methodology is tested and found operational for risk assessment of flood-prone areas and communities irrespective of locations and countries.     

Lower-Middle Triassic rocks in the Enmynveem River (western Chukotka)

The Lower-Middle Triassic section of the Enmynveem River dated on the basis of macrofauna includes three genetic types of sediments with different structural-textural features: (1) sediments of high-density autokinetic flows; (2) sediments of low-density turbidity flows; and (3) background sediments with thin interlayers of fine-grained turbidites. It has been established that sandy-silty sediments of all three genetic types formed on the continental slope in deep-water conditions, but their accumulation was related to the erosion of rocks in various provenances. Some sediments were formed as the result of the erosion of proximal volcanic complexes, whereas other sediments were related to the erosion of metamorphic rocks on the distal continental land.     

Part II. Evaluation of Ar-Ar quartz ages: Implications for fluid inclusion retentivity and determination of initial Ar/Ar values in Proterozoic samples

The argon isotope systematics of vein-quartz samples with two different K-reservoirs have been evaluated in detail. Potassium is hosted by ultra-high-salinity fluid inclusions in quartz samples from the Eloise and Osborne iron-oxide-copper-gold (IOCG) deposits of the Mt Isa Inlier, Australia. In contrast, K is hosted by accidentally trapped mica within lower-salinity fluid inclusions of a sample selected from the Railway Fault, 13 km south of the Mt Isa copper mine, Australia. Imprecise apparent ages have been obtained for all of the samples studied and conclusively demonstrate that quartz fluid inclusions are retentive to Ar and have not leaked over billions of years. IOCG samples that host K in fluid inclusions only, have K/Cl values of <1 and the ages obtained represent the maximum ages for mineralization. In contrast, the Railway Fault samples that include accidentally trapped mica have K/Cl values of ?1. Excess ⁴⁰Ar_E plus Cl hosted by fluid inclusions, and radiogenic ⁴⁰Ar_R plus K, are strongly correlated in these samples and define a plane in 3D ⁴⁰Ar-³⁶Ar-K-Cl space. In this case, the plane yields an ‘excess ⁴⁰Ar_E’ corrected age of ∼1030 Ma that is 100’s of Ma younger than nearby Cu-mineralization at Mt Isa. The age is interpreted to reflect ⁴⁰Ar-loss from the accidentally trapped mica into the surrounding fluid inclusions, and is not related to the samples’ age of formation. The initial ⁴⁰Ar/³⁶Ar value of fluid inclusions is widely used to provide information on fluid origin. For the IOCG samples that host K in fluid inclusions only, the initial ⁴⁰Ar/³⁶Ar values are close to the measured values at every temperature of stepped heating experiments. For samples that include accidentally trapped mica, the correction for post-entrapment radiogenic ⁴⁰Ar_R production is significant. Furthermore, because ³⁹Ar_K present in accidentally trapped mica crystals is released at different temperatures to radiogenic ⁴⁰Ar_R lost to the surrounding fluid inclusions, intra-sample ⁴⁰Ar/³⁶Ar variation cannot be reliably documented. The results demonstrate that noble gas analysis is readily applicable to Proterozoic, or older, samples but that if K-mineral impurities are present within quartz the abundance of K must be determined before calculation of mean ⁴⁰Ar/³⁶Ar values that are representative of the samples’ initial composition.     

Evolution of the Landscape of the Western Part of the Turan–Uyuk Basin (Tuva Highland) in the Late Pleistocene

Doklady Earth Sciences - A complex of works including geomorphological deciphering, field survey, drilling, electric prospecting, and dating of deposits using the radiocarbon method and optically...     

Electronic structures of sulfide minerals — Theory and experiment

The sulfide minerals exhibit a rich diversity in sturctural chemistry and in electrical, magnetic and other physical properties. Models based on molecular orbital theory and incorporating some elements of band theory can be developed to describe the diverse valence electron behavior in these minerals. Qualitative models can be proposed on the basis of observed properties, and the models can be tested and refined using experimental data from X-ray emission and X-ray photoelectron spectroscopy and quantum mechanical calculations performed on cluster units which form the basic building blocks of the crystals. This approach to chemical bonding in sulfide minerals is illustrated for binary non-transition metal sulfides (ZnS, CdS, HgS, PbS), binary transition metal sulfides (FeS₂, CoS₂, NiS₂, CuS₂ ZnS₂) and more complex sulfides (CuFeS₂, Cu₂S, Ag₂S, CuS, Co₃S₄, CuCo₂S₄, Fe₃S₄). The relationship between qualitative and quantitative theories is reviewed with reference to the pyrite-marcasite-arsenopyrite-loellingite series of minerals. Application of the models to understanding structure-determining principles, relative stabilities, solid solution limits and properties such as color, reflectance and hardness are discussed.