Measurement of stress effects (scope for growth) and contaminant levels in mussels (Mytilus edulis) collected from the Irish Sea

The objective of this research was to quantify the impact of pollution along the coastlines of the Irish Sea. Pollution assessment was based on the combined measurement of scope for growth (SFG), and chemical contaminants in the tissues of mussels (Mytilus edulis) collected from 38 coastal sites around the Irish Sea during June-July in 1996 and 1997. On the UK mainland coast, the SFG showed a general trend with a significant decline in water quality in the Liverpool and Morecambe Bay region. High water quality was recorded along the west coast of Wales, as well as southwest England and northwest Scotland (clean reference sites outside the Irish Sea). Along the coast of Ireland there was a similar trend with reduced SFG within the Irish Sea region. SFG was generally low north of Duncannon and then improved north of Belfast. The poor water quality on both sides of the Irish Sea is consistent with the prevailing hydrodynamics and the spatial distribution of contaminants associated with urban/ industrial development. The decline in SFG of mussels on both sides of the Irish Sea was associated with a general increase in contaminant levels in the mussels. Certain contaminants, including PAHs, TBT, sigmaDDT, Dieldrin, gamma-HCH, PCBs, and a few of the metals (Cd, Se, Ag, Pb), showed elevated concentrations. Many of these contaminants were particularly elevated in the coastal margins of Liverpool Bay, Morecambe Bay and Dublin Bay. A quantitative toxicological interpretation (QTI) of the combined tissue residue chemistry and SFG measurements indicated that at the majority of coastal sites, c. 50 to > 80% of the observed decline in SFG was due to PAHs as a result of fossil fuel combustion and oil spills. TBT levels were highest at major ports and harbours, but these concentrations only made a minor contribution to the overall reduction in SFG. At no sites were individual metals accumulated to concentrations that could cause a significant effect on SFG. The study identified many sites where the observed reduction in SFG was far greater than predicted from the limited number of chemical contaminants analysed, thus indicating the presence of additional 'unknown toxicants'. Sewage (containing domestic, agricultural and industrial components) appears to be an important contributor to reduced SFG and linear alkylbenzenes (LABs) and As may provide suitable 'sewage markers'. There was a highly significant positive correlation between SFG and As (P < 0.001). This relationship may be due to reduced As uptake by algal food material and mussels at sites with elevated P04 concentrations (e.g. at sites with sewage inputs). Phosphate is a known competitive inhibitor of As accumulation, at least in algae. The results highlight that further research is required on 'sewage markers' in mussels. The SFG approach therefore provides a rapid, cost-effective and quantitative measure of pollution impact, as well as a means of identifying the causes through a QTI of tissue contaminants levels. It also serves to identify the presence of unidentified toxicants and areas that require further study.     

Implications from a field study regarding the relationship between polycyclic aromatic hydrocarbons and glutathione S-transferase activity in mussels

An aluminium smelter on the west coast of Scotland discharges an aqueous effluent containing polycyclic aromatic hydrocarbons (PAHs) at the head of Loch Leven. The loch also supports two mussel (Mytilus edulis) farms. Data are presented on burdens of PAHs in the soft tissues of mussels and the effect of these contaminants on glutathione S-transferase (GST) activity in mussel hepatopancreas. GST activity is shown to be correlated with total PAH burden and also with the concentrations of certain individual PAHs. These field data show that high molecular weight PAHs are closely correlated to GST activity, whereas low molecular weight PAHs are not. This suggests that 5- and 6-ring PAHs have a more pronounced role than 2- to 4-ring compounds in inducing GST activity in mussels from Loch Leven. It is proposed that it may be more appropriate to link GST activity with 5- and 6-ring compounds only, rather than with the total PAH burden.     

Seasonally Hypersaline Estuaries in Mediterranean-climate Regions

Data collected in three Californian estuaries indicate that hypersaline conditions exist during the dry summers typical of a Mediterranean climate. The generalised seasonal and longitudinal hydrographic structures are described and explained. It is argued that this seasonal hypersalinity is common and that it represents a major class of estuaries. The observed accumulation of salt indicates surprisingly long residence times in small basins which have free exchange with the ocean. This semi-isolation of the inner basin leads to a large build-up or severe depletion of nutrients, pollutants and plankton in these systems. Of concern are the trends to increase pollutant loading in the same systems that are experiencing an increase in residence times owing to freshwater extraction in the watershed.     

Sensitivity to stress of the estuarine bivalve Macoma balthica from areas between the Netherlands and its southern limits (Gironde)

Variation in the sensitivity to stress of Macoma balthica was measured in several French and Dutch estuaries. For adult and juvenile Macoma balthica exposed to copper under conditions of starvation, differences in mortality rate, condition, glycogen, burrowing rate and copper content were assessed. No significant differences were observed between adults and juveniles; the influence of treatment and origin was always evident. Animals from the most southern estuaries, Loire and Gironde, near to the species's southern limit of distribution, showed, in the field, the strongest deviations for the ecophysiological traits measured, and were in the experiments the most sensitive to stress.     

Mixed-function oxygenases as biological monitors around petroleum hydrocarbon development sites: Potential for induction by diesel and other drilling mud base oils containing reduced levels of polycyclic aromatic hydrocarbons

The use of oil-based drilling muds has been discouraged in hydrocarbon exploration and production in the marine environment but these muds are presently being used to a considerable degree in the United Kingdom and Norwegian sectors of the North Sea. Field studies in the North Sea have demonstrated only localized impacts around individual drilling sites,^1,2 even including those sites where ‘toxic’ diesel oils were employed as base fluids in drilling muds. Yet the question of disposal of cuttings contaminated with oil from drilling muds remains somewhat controversial. The induction of mixed-function oxygenases (MFO) has been validated on a number of occasions in the field as a sensitive index of low level hydrocarbon exposure (reviewed by Payne),³ including sites in the North Sea where diesel-based muds were used.⁴ The present study demonstrates that any potential for induction by hydrocarbon contaminated cuttings will probably be reduced by substitution of low-aromatic base oils for diesel in drilling mud formulations.     

The distribution of tritium and CFCs in the Weddell Sea during the mid-1980s

Transient tracer data (tritium, CFC11 and CFC12) from the southern, central and northwestern Weddell Sea collected during Polarstern cruises ANT III-3, ANT V-2/3/4 and during Andenes cruise NARE 85 are presented and discussed in the context of hydrographic observations. A kinematic, time-dependent, multi-box model is used to estimate mean residence times and formation rates of several water masses observed in the Weddell Sea.Ice Shelf Water is marked by higher tritium and lower CFC concentrations compared to surface waters. The tracer signature of Ice Shelf Water can only be explained by assuming that its source water mass, Western Shelf Water, has characteristics different from those of surface waters. Using the transient nature of tritium and the CFCs, the mean residence time of Western Shelf Water on the shelf is estimated to be approximately 5 years. Ice Shelf Water is renewed on a time scale of about 14 years from Western Shelf Water by interaction of this water mass with glacial ice underneath the Filchner-Ronne Ice shelf. The Ice Shelf Water signature can be traced across the sill of the Filchner Depression and down the continental slope of the southern Weddell Sea. On the continental slope, new Weddell Sea Bottom Water is formed by entrainment of Weddell Deep Water and Weddell Sea Deep Water into the Ice Shelf Water plume. In the northwestern Weddell Sea, new Weddell Sea Bottom Water is observed in two narrow, deep boundary currents flowing along the base of the continental slope. Classically defined Weddell Sea Bottom Water (θ ≤ −0.7°C) and Weddell Sea Deep Water (−0.7°C ≤ θ ≤ 0°C) are ventilated from the deeper of these boundary currents by lateral spreading and mixing. Model-based estimates yield a total formation rate of 3.5Sv for new Weddell Sea Bottom Water (θ = −1.0°C) and a formation rate of at least 11Sv for Antarctic Bottom Water (θ = −0.5°C).     

Sedimentology and morphodynamics of a macrotidal beach, Pendine Sands, SW Wales

The foreshore of Pendine Sands forms the seaward part of an extensive, sandy coastal barrier in a shallow Carmarthen Bay, SW Wales. The sedimentological features of the macrotidal foreshore reflect a tide-induced modification of nearshore wave characteristics. As the tide ebbs, the breaker height may decrease, the surf zone widens and becomes increasingly dissipative, and swash/backwash velocities diminish. A concomitant change from plunging to spilling breakers and increasingly symmetrical swash zone flows are associated with a decreasing beach gradient.

A zero net transport model demonstrates that the beach profile is self-stabilising in the short-term, and periodic levelling has shown that the beach is in long-term equilibrium with prevailing conditions, though this does not preclude a significant dynamic response to changing tides and waves.

The flow regimes of wave-generated currents decline as the tide ebbs, and normal beach processes do not usually affect the lower foreshore. Accordingly, there is an overall seaward-fining of the primary framework component of the sands. In more detail, this framework component displays a slight seaward-coarsening across an upper foreshore dominated by high water swash and surf; a rapid seaward-fining across the mid-foreshore in response to the ebb-attenuating swash zone flow velocities; and a slight seaward-fining across the lower foreshore under the action of nearshore shoaling waves. Bedforms vary from a swash/backwash emplaced flat bed across the upper foreshore to the small ripples of nearshore asymmetric oscillatory flows across the lower foreshore.

The surface sediment veneer is not representative of the subsurface sediments which form in response partly to fairweather conditions, partly to storms. The upper foreshore is characterised by swash/backwash emplaced plane bedding in fine sands frequently disrupted by bubble cavities. The mid-foreshore is composed of coarser-grained shelly traction clogs arranged as landward- and seaward-dipping large-scale cross bedding and/or plane bedding; these are probably storm breaker/surf deposits. The lower foreshore, though partially and sometimes totally bioturbated, shows landward-dipping small-scale cross bedding in very fine sands sorted by nearshore shoaling waves.

Tide- and storm-induced modification of the nearshore flow regimes therefore produces a distinctive shore-normal array of sedimentary facies. Each facies is characterised by diagnostic textural and structural signatures. A prograding sequence of such macrotidal deposits would be similar to, but more extensive than, a comparable microtidal sequence.     

On the use of poorly soluble hygroscopic substances for modification of warm clouds and fogs

From analysis of the relationships between the equilibrium state of condensation nuclei and the relative humidity, a conclusion is made concerning the preferred use of poorly soluble substances for the generation of artificial condensation nuclei (ACN) designed for modification of warm clouds and fogs with the purpose of their dissipation and precipitation formation. The advantage of poorly soluble substances over commonly used soluble salts is that the finely dispersed part of the spectrum of the poorly soluble ACN does not deliquesce and so is not involved in the formation of cloud droplets. For experimental testing of the conclusions, preference was given to cement, whose main soluble substance is calcium oxide with a solubility of about 1 g/l. The spectrum of dispersed cement particles was measured and compared with the spectra of pyrotechnic flares widely used for modification at present. The process of formation of the cloud droplet spectra was simulated in the aerosol chamber of the Institute of Experimental Meteorology by decreasing the preliminarily generated excess pressure. It was found in these experiments that, compared to the spectra of particles formed on background condensation nuclei, the introduction of dispersed cement leads to the broadening of spectra and to a decrease in the concentration of droplets. Even at the early stage of condensation, droplets with radii of ∼20 μm appear. In this case, no “overseeding” phenomenon is observed, which, for soluble substances, manifests itself in an increase in the concentration of cloud droplets with a large ACN concentration. These effects indicate that, according to the existing concepts about the mechanism of warm-cloud modification with hygroscopic substances, the introduction of poorly soluble ACN (in particular, dispersed cement) below the base of cumulus clouds should stimulate coagulation processes and accelerate rain-formation processes. Considerations are given that the introduction of poorly soluble ACN into the already existing cumulus or stratocumulus clouds or fogs should also result in the acceleration of precipitation-formation processes or cloud dispersal. Comparison of cement powder with the well-known means of warm-cloud and fog modification is carried out. Original Russian Text ? N.P. Romanov, A.S. Drofa, N.S. Kim, A.V. Savchenko, G.F. Yaskevich, 2006, published in Izvestiya AN. Fizika Atmosfery i Okeana, 2006, Vol. 42, No. 1, pp. 80–91.     

Modeling drift currents in a shallow basin with allowance for variations in tangential stresses induced by wind waves

A coupling model for calculating wind-driven currents and waves in a shallow basin with allowance for current-wave interactions is introduced. The model is constructed on the basis of the three-dimensional σ-coordinate model of currents [3] and the SWAN (Simulating Waves Nearshore) spectral wave model [4]. The effect of waves on currents is taken into account in the coefficients of surface and bottom friction through roughness parameters. Results of combined modeling of stationary fields of currents and waves generated by spatially homogeneous wind are correlated with the corresponding results of separate modeling for a cylindrical basin of constant depth and the water area of Lake Donuzlav (the northwestern coast of the Crimea). The allowance for the effect of waves during calculation of tangential wind stresses in the model of currents is shown to be among major factors intensifying water circulation and forming spatial inhomogeneities of the vortex type. In addition, some cases of local decreases in tangential wind stresses are revealed; they appear when the lake is penetrated from the side of the open sea by relatively long waves, which significantly decrease the roughness of the water surface.