Survival of organic phases in porous IDPs during atmospheric entry: A pulse‐heating study

Abstract— In this study, we have performed pulse‐heating experiments at different temperatures for three organic molecules (a polycyclic aromatic hydrocarbon [PAH], a ketone, and an amino acid) absorbed into microporous aluminum oxide (Al₂O₃) in order to imitate the heating of the organic molecules in interplanetary dust particles (IDPs) and micrometeorites (MMs) during atmospheric entry and to investigate their survival. We have shown that modest amounts (a few percent) of these organic molecules survive pulse‐heating at temperatures in the 700 to 900 °C range. This suggests that the porosity in IDPs and MMs, combined with a sublimable phase (organic material, water), produces an ablative cooling effect, which permits the survival of organic molecules that would otherwise be lost either by thermal degradation or evaporation during atmospheric entry.     

Investigation of Failure Mechanisms and Migration of Organic Chemicals at Wilsonville, Illinois

Ground water contamination was discovered in 1981 in a monitoring well at the Earthline disposal facility near Wilsonville, Illinois. Organic chemicals had migrated at a rate 100 to 1000 times greater than predicted when the site received its permit to operate in 1978. Postulated failure mechanisms included migration through previously unmapped permeable zones, subsidence of an underground mine, organic-chemical and clay-mineral interactions, acid-mine drainage and clay interactions, trench-cover settlement, and erosion.
In this investigation, the Illinois State Geological Survey found the primary reason for the rapid migration: the presence of previously undetermined fractures and joints in glacial till. The inaccurate predictions of hydraulic conductivity were based on laboratory-determined values that did not adequately measure the effects of fractures and joints on the transit time calculations. Field-measured hydraulic conductivity values were generally 10 to 1000 times greater than their laboratory-measured counterparts, thus largely accounting for the discrepancy between predicted and actual migration rates in the transit time calculations. The problem was compounded, however, by the burial of liquid wastes and by trench covers that allowed excess surface runoff to enter the trenches. Organic-chemical and clay-mineral interactions may also have exacerbated the problem in areas where liquid organic wastes were buried.     

Nutrient (P, N) dynamics in the southwestern Kattegat, Scandinavia: sedimentation and resuspension effects

 The yearly nutrient supply from land and atmosphere to the study area in SW Kattegat is 10 900 tons of N and 365 tons of P. This is only few percent of the supply from adjacent marine areas, as the yearly transport through the study area is 218 000 tons of N and 18 250 tons of P. Yearly net deposition makes up 1340 tons of N (on average 2.5 g m^–2 yr^–1) and 477 ton of P (on average 0.9 g m^–2 yr^–1). Shallow-water parts of the study area have no net deposition because of frequent (>35% of the year) resuspension. Resuspension frequency in deep water is <1% of the year. Resuspension rates, as averages for the study area, are 10–17 times higher than net deposition rates. Because of resuspension, shallow-water sediments are coarse lag deposits with small amounts of organic matter (1.1%) and nutrients (0.04% N and 0.02% P). Deep-water sediments, in contrast, are fine grained with high levels of organic matter (11.7%) and nutrients (0.43% N and 0.15% P). Laboratory studies showed that resuspension changes the diffusive sediment water fluxes of nutrients, oxygen consumption, and penetration into the sediment. Fluxes of dissolved reactive phosphate from sediment to water after resuspension were negative in organic-rich sediments (13.2% organic matter) with low porosity (56) and close to zero in coarse sediments with a low organic matter content (2.3%) and high porosity (73). Fluxes of inorganic N after resuspension were reduced to 70% and 0–20% in relation to the rates before resuspension, respectively. Received: 10 July 1995 · Accepted: 19 January 1996     

A new method of initial orbit determination

Up to now we have been dealing with the construction of entirely analytical planetary theories such as VSOP82 (Bretagnon, 1982) and TOP82 (Simon, 1983). These theories take into account the whole of the Newtonian perturbations of nine point masses: the Sun, the Earth-Moon barycentre, the planets Mercury, Venus, Mars, Jupiter, Saturn, Uranus and Neptune. They also take into account perturbations due to some minor planets, to the action of the Moon and the relativistic effects. The perturbations of these last three types are in a very simple way under analytical form but they considerably increase the computations when introduced in the numerical integration programs.In the present paper we thus study a solution in which the Newtonian perturbations for the ten point masses are treated through numerical integration, the other perturbations being analytically added.     

Error estimates with L1 solutions

A method is given, based on the pseudoinverse of the equations of condition, to obtain error estimates for the solution in the normL ₁ of an over-determined linear system. The computational labor to obtain the errors, while not trivial, is less than that for various competing methods, particularly if there are many more equations of condition than unknowns. The error estimates for anL ₁ solution are substantially larger than those for a least squares solution of the some data. It is suggested that a complete discussion of a linear system include at least bothL ₁ and least squares solutions with their respective errors and the condition number of the linear system.     

Theoretical properties of radio-galaxies

We present optical photometric observations of the cataclysmic variables AO Psc and V 1223 Sgr, both of which are believed to contain slowly-rotating white-dwarf pulsars. These objectes belong to the new class of intermediate polars in which the magnetized-white-dwarf rotation period lies in between synchrous and extremely fast rotation periods. The observations reported here were carried out from the Kavalur Observatory using a 1 m reflector. High-time resolution light curves depicting a rich variety of flicker phenomena are presented. Results of a periodic analysis to search for coherent periodic modulations in the light curves are also presented. We have also derived the optical pulse profile of AO Psc and point out its similarities to the X-ray pulse profile.     

EUV observations of subflares and surges

EUV observations of two subflares and associated surges have been analyzed. At maximum brightness the emission measures and radiative outputs of the subflares were approximately 20% of the corresponding values for the active region. Multiple EUV surges were observed during and following each subflare, with surge material being ejected in a variety of directions, including toward a coronal bright point located outside of the active region. The total energy of the surges appears to be comparable to that radiated by the subflares, a few times 10²⁸ erg. As reported in previous studies of surges, we find that there was no significant emission from these features in spectral lines formed at temperatures T>10⁶K. The ejection of surges in several different directions and nearly simultaneous flaring of various areas of the active region suggest that the primary site of the subflares was magnetically connected to a variety of different areas in the active region and the surrounding quiet region.     

Interpretation of transient electromagnetic soundings over three-dimensional structures for the central-loop configuration

Summary. An assessment is made of the bias of fitting constrained layered-earth models to transient electromagnetic data obtained over 3-D structures. In this assessment we use the central-loop configuration and show that accurate estimates of the depth of burial of 3-D structures can be obtained with layered-earth model fitting. However, layered-earth interpretations are not reliable for estimating depth extents and resistivities of 3-D structures. When layered earths are used for interpretation, it is advantageous in some cases to use data based on the magnetic field instead of the voltage. A magnetic-field definition of apparent resistivity, in contrast to a definition based on the voltage, eliminates apparent-resistivity overshoots and undershoots in the data. A resistivity undershoot in the data can produce an extraneous and misleading layer in an interpretation of a 3-D resistive structure. Due to 3-D effects, apparent-resistivity soundings (magnetic field and voltage) may rise so steeply at late times that it may not be possible to fit a sounding to a reasonable layered-earth model. Truncating such a sounding, over a buried conductor, allows for a reasonable layered-earth fit and an accurate estimate of the depth to the conductor. However, the resistivity of the conductor is overestimated.
Measurements of the horizontal field in the central-loop configuration can map 3-D structures, provided the sensor is located accurately at the centre of the transmitting loop. Horizontal-field calculations show that the transients peak on the flanks of a 3-D structure, but are depressed over the structure's centre. Weak transient responses flanked by two large transient responses, which are opposite in sign, locate the structure. The sign reversal is caused by a corresponding reversal in the currents that are channelled through or deflected away from conductive or resistive structures, respectively.     

Design of a high update-rate star sensor for arcsec-level attitude determination from balloon-borne X/γ astronomy platforms

This paper describes the design of a star sensor based upon a high dynamic range CCD in order to reach an arcsec-level attitude determination in balloon-borne missions. A custom star identification software was developed and laboratory-tested on a prototype assembled using commercial components. A set of numerical simulations have been carried out to study the dependence on the pointing precision of the centroid position accuracy, the number of detected stars and the effect of the image focusing. Moreover, the role of the electronic noise and the discrete pixel structure on the light signals is identified by the analysis of numerical simulations. Laboratory tests confirm that the arcsec pointing accuracy with a 1 Hz update rate can be achieved with our combination of custom-developed software and selected hardware components.