An algorithm for fast 3D inversion of surface electrical resistivity tomography data: application on imaging buried antiquities

In this work a new algorithm for the fast and efficient 3D inversion of conventional 2D surface electrical resistivity tomography lines is presented. The proposed approach lies on the assumption that for every surface measurement there is a large number of 3D parameters with very small absolute Jacobian matrix values, which can be excluded in advance from the Jacobian matrix calculation, as they do not contribute significant information in the inversion procedure. A sensitivity analysis for both homogeneous and inhomogeneous earth models showed that each measurement has a specific region of influence, which can be limited to parameters in a critical rectangular prism volume. Application of the proposed algorithm accelerated almost three times the Jacobian (sensitivity) matrix calculation for the data sets tested in this work. Moreover, application of the least squares regression iterative inversion technique, resulted in a new 3D resistivity inversion algorithm more than 2.7 times faster and with computer memory requirements less than half compared to the original algorithm. The efficiency and accuracy of the algorithm was verified using synthetic models representing typical archaeological structures, as well as field data collected from two archaeological sites in Greece, employing different electrode configurations. The applicability of the presented approach is demonstrated for archaeological investigations and the basic idea of the proposed algorithm can be easily extended for the inversion of other geophysical data.     

Contribution of geophysical methods to karst-system exploration: an overview

The karst environment is one of the most challenging in terms of groundwater, engineering and environmental issues. Geophysical methods can provide useful subsurface information in karst regions concerning, for instance, hazard estimation or groundwater exploration and vulnerability assessment. However, a karst area remains a very difficult environment for any geophysical exploration; selection of the best-suited geophysical method is not always straightforward, due to the highly variable and unpredictable target characteristics. The state of the art is presented, in terms of the contributions made by geophysical methods to karst-system exploration, based on extensive analysis of the published scientific results. This report is an overview and should be used as a preliminary methodological approach, rather than a guideline.     

Improving NWP through radar rainfall-driven land surface parameters: A case study on convective precipitation forecasting

In this study we investigate the effect of forcing the land surface scheme of an atmospheric mesoscale model with radar rainfall data instead of the model-generated rainfall fields. The goal is to provide improved surface conditions for the atmospheric model in order to achieve accurate simulations of the mesoscale circulations that can significantly affect the timing, distribution and intensity of convective precipitation. The performance of the approach is evaluated in a set of numerical experiments on the basis of a 2-day-long mesoscale convective system that occurred over the US Great Plains in July 2004. The experimental design includes multiple runs covering a variety of forcing periods. Continuous data integration was initially used to investigate the sensitivity of the model’s performance in varying soil state conditions, while shorter time windows prior to the storm event were utilized to assess the effectiveness of the procedure for improving convective precipitation forecasting. Results indicate that continuous integration of radar rainfall data brings the simulated precipitation fields closer to the observed ones, as compared to the control simulation. The precipitation forecasts (up to 48 h) appear improved also in the cases of shorter integration periods (24 and 36 h), making this technique potentially useful for operational settings of weather forecasting systems. A physical interpretation of the results is provided on the basis of surface moisture and energy exchange.     

On magma fragmentation by conduit shear stress: Evidence from the Kos Plateau Tuff,Aegean Volcanic Arc

Large silicic explosive eruptions are the most catastrophic volcanic events. Yet, the intratelluric mechanisms underlying are not fully understood. Here we report a field and laboratory study of the Kos Plateau Tuff (KPT, 161 ka, Aegean Volcanic Arc), which provides an excellent geological example of conduit processes that control magma vesiculation and fragmentation during intermediate- to large-scale caldera-forming eruptions. A prominent feature of the KPT is the occurrence of quite unusual platy-shaped tube pumice clasts in pyroclastic fall and current deposits from the early eruption phases preceding caldera collapse. On macroscopic and SEM observations, flat clast faces are elongated parallel to tube vesicles, while transverse surfaces often occur at ~ 45° to vesicle elongation. This peculiar pumice texture provides evidence of high shear stresses related to strong velocity gradients normal to conduit walls, which induced vesiculation and fragmentation of the ascending magma. Either an increasing mass discharge rate without adequate enlargement of a narrow central feeder conduit or a developing fissure-like feeder system related to incipient caldera collapse provided suitable conditions for the generation of plate tube pumice within magma volumes under high shear during the pre-climactic KPT eruption phases. This mechanism implies that the closer to the conduit walls (where the stronger are the velocity gradients) the larger was the proportion of plate vs. conventional (lensoid) juvenile fragments in the ascending gas–pyroclast mixture. Consequently, plate pumice clasts were mainly entrained in the outer portions of the jet and convecting regions of a sustained, Plinian-type, eruption column, as well as in occasional lateral blast currents generated at the vent. As a whole, plate pumice clasts in the peripheral portions of the column were transported at lower altitudes and deposited by fallout or partial collapse closer to the vent relative to lensoid ones that dominated in the inner column portions. The plate tube pumice proportion decreased abruptly up to disappearance during the emplacement of the main pyroclastic currents and lithic-rich breccias related to extensive caldera collapse at the eruption climax, as a consequence of an overall widening of the magma feeder system through the opening of multiple conduits and eruptive vents, along with fissure erosion, concomitant to the disruption of the collapsing block.     

Seismic fragility curves for greek bridges: methodology and case studies

This study focusses on the estimation of seismic fragility curves for all common bridge types found in modern greek motorways. At first a classification scheme is developed in order to classify the existing bridges into a sufficient number of classes. A total of 11 representative bridge classes resulted, based on the type of piers, deck, and pier-to-deck connection. Then an analytical methodology for deriving fragility curves is proposed and applied to the representative bridge models. This procedure is based on pushover analysis of the entire bridge and definition of damage states in terms of parameters of the bridge pushover curves. The procedure differentiates the way of defining damage according to the seismic energy dissipation mechanism in each bridge, i.e. bridges with yielding piers of the column type and bridges with bearings (with or without seismic links) and non-yielding piers of the wall type. The activation of the abutment-backfill system due to closure of the gap between the deck and the abutments is also taken into account. The derived fragility curves are subjected to a first calibration against empirical curves based on damage data from the US and Japan.     

The S(c) spectrum machine to visualize the motion in galaxies

The behavior of the orbits in a galaxy model composed of an harmonic core and a strong bar potential is studied. Numerical calculations show that a large number of orbits display chaotic motion. These orbits are low angular momentun orbits. The percentage of chaotic orbits increases as the angular velocity of the system increases or the strength of the harmonic term decreases. A new dynamical parameter, the S(c) spectrum, is introduced and used to detect the island motion and the evolution of the sticky regions. Comparison to previously obtained results reveals the leading role of the new spectrum. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Polyorogenic reworking of ore‐controlling shear zones at the South Range of the Sudbury impact structure: A telltale story from in situ U–Pb titanite geochronology

The post‐impact orogenic evolution of the world class Ni–Cu–PGE Sudbury mining camp in Ontario remains poorly understood. New temporal constraints from ore‐controlling, epidote–amphibolite facies shear zones in the heavily mineralised Creighton Mine (Sudbury, South Range) illuminate the complex orogenic history of the Sudbury structure. In situ U–Pb dating of shear‐hosted titanite grains by LA‐ICP‐MS reveals new evidence for shear zone reworking during the Yavapai (ca. 1.77–1.7 Ga), Mazatzalian–Labradorian (1.7–1.6 Ga) and Chieflakian–Pinwarian (1.5–1.4 Ga) accretionary events. The new age data show that the effects of the Penokean orogeny (1.9–1.8 Ga) on the structural architecture of the Sudbury structure have been overestimated. At a regional scale, the new titanite age populations corroborate that the Southern Province of the Canadian Shield documents the same tectonothermal episodes that are recorded along orogenic strike within the accretionary provinces of the Southwestern United States.     

Physical identification of static and axially-symmetric vacuum metric tensors

We present a method of a possible physical identification of the static and axially symmetric Weyl-type vacuum γ and nγ metrics. This method, in which no interior solutions of any kind are involved, is based on the comparison of the far-field forms of the γ and nγ metrics, and of the far-field form of the metric tensor due to a bounded gravitating perfect-fluid source given correctly to post-Newtonian accuracy. The parameters of the vacuum solutions are expressed in terms of physical parameters of a prolate fluid source, namely total mass-energy, semiaxes and eccentricity, defined consistently to post-Newtonian accuracy. The results, based on the otherwise arbitrary fluid source, appear physically general. Possible astrophysical candidates for the far-field γ andnγ metrics are proposed, based on the conditions imposed on them by the identification method. The advantages and deficiencies of the identification method are briefly discussed.     

Restructuring the kiosk trade in St. Petersburg: A new retail trade model for the post-Soviet period

This study explores the commercial kiosk phenomenon as a reflection of the socio-spatial reordering of St. Petersburg following the introduction of market forces. In this article we interpret empirical evidence on the restructuring of commercial opportunity in post-Soviet St. Petersburg as a result of the emergence of the kiosk phenomenon. Kiosk trade and processes that contribute to it have emerged as tools for mass socioeconomic and psychological adaptation, following the dismantling of the communist regime. In our opinion, the emergence and continuing mutation of St. Petersburg kiosks constitutes the backbone of a process of middle-class formation. An extensive field research of 1989, 1994 and 1995 made it possible to study the dynamics of spatial structures of kiosk phenomenon. It is our final conclusion that kiosks will remain an important feature of St. Petersburgs commercial geography in the foreseeable future.     

Occurrence and40Ar/39Ar dating of a granite in Thera (Santorini,Greece)

A granite was drilled in the prevolcanic basement of Thera, an island of the Attico-Cycladic belt. It intruded the blueschist facies country rocks. K-Ar biotite ages and Ar-Ar plateau ages on two feldspars indicate rapid cooling, as all ages cluster around 9.5 Ma. Its occurrence indicates that the thermometamorphic evolution that characterizes the Attiko-Cycladic belt extends as far as Thera.

---

Zusammenfassung Auf der Insel Thera, im Attiko-Kykladishen Gürtel, ist ein Granitkörper in einer Tiefe von ca. 250 m durch eine Bohrung aufgedeckt. Dieser Granitkörper ist in metamorphen Gesteinen von Blauschiefer-Facies intrudiert. K-Ar-Biotit- und Ar-Ar-Feldspat-Altersbestimmungen streuen um 9.5 Ma. Diese Alter weisen auf rasche Abkühlung des Granitkörpers hin. Es zeigt sich somit, daß die thermometamorphe Entwicklung des Attiko-Kykladischen Gürtels bis zur Insel Thera reicht.

---

Résumé Un forage a été pratiqué dans un granite du socle pré-volcanique de l'île de Thera, qui appartient à la ceinture attico-cycladique. Ce granite a intrudé les roches encaissantes de facies schistes bleus. Les datations effectuées sur les biotites par la méthode K-Ar et les âges-plateau des feldspaths obtenus par la méthode Ar-Ar indiquent un refroidissement rapide, puisque tous les âges sont de l'ordre de 9,5 Ma. Ce granite montre que l'évolution thermométamorphique qui caractérise la ceinture Attico-Cycladique s'étend jusqu'à l'île de Thera.

---

Thera 250 . . / / 9,5 . , . .. , Thera.