Optical observations of an infrared selected sample of galaxies

Extragalactic IRAS sources with previously unknown optical counterparts were selected from thePoint Source Catalog within two 300 deg² areas. Deep CCD images have been obtained for 99 objects and long-slit spectroscopy has been performed in 55 fields. The morphological, spectroscopic and photometric properties of these objects are summarized.     

Nanoscale zero-valent iron flakes for groundwater treatment

Even today the remediation of organic contaminant source zones poses significant technical and economic challenges. Nanoscale zero-valent iron (NZVI) injections have proved to be a promising approach especially for source zone treatment. We present the development and the characterization of a new kind of NZVI with several advantages on the basis of laboratory experiments, model simulations and a field test. The developed NZVI particles are manufactured by milling, consist of 85 % Fe(0) and exhibit a flake-like shape with a thickness of <100 nm. The mass normalized perchloroethylene (PCE) dechlorination rate constant was 4.1 × 10^?3 L/g h compared to 4.0 × 10^?4 L/g h for a commercially available reference product. A transport distance of at least 190 cm in quartz sand with a grain size of 0.2–0.8 mm and Fe(0) concentrations between 6 and 160 g/kg (sand) were achieved without significant indications of clogging. The particles showed only a low acute toxicity and had no longterm inhibitory effects on dechlorinating microorganisms. During a field test 280 kg of the iron flakes was injected to a depth of 10–12 m into quaternary sand layers with hydraulic conductivities ranging between 10^?4 and 10^?5 m/s. Fe(0) concentrations of 1 g/kg (sand) or more [up to 100 g/kg (sand)] were achieved in 80 % of the targeted area. The iron flakes have so far remained reactive for more than 1 year and caused a PCE concentration decrease from 20.000–30.000 to 100–200 µg/L. Integration of particle transport processes into the OpenGeoSys model code proved suitable for site-specific 3D prediction and optimization of iron flake injections.     

The omnipresent water fern Azolla caroliniana does not contain lignin

Several studies have reported the presence of large amounts of lignin in ubiquitously occurring species of the freshwater fern Azolla. Molecular analysis using flash pyrolysis and thermally assisted hydrolysis and methylation shows, however, that neither the leaves nor the roots of Azolla contain lignin. Instead, both contain polyphenolic constituents that have a close resemblance to condensed tannins, albeit with a slightly different composition than the common tannins of higher plants.     

Inputs of iron,manganese and aluminium to surface waters of the Northeast Atlantic Ocean and the European continental shelf

Dissolved Fe, Mn and Al concentrations (dFe, dMn and dAl hereafter) in surface waters and the water column of the Northeast Atlantic and the European continental shelf are reported. Following an episode of enhanced Saharan dust inputs over the Northeast Atlantic Ocean prior and during the cruise in March 1998, surface concentrations were enhanced up to 4 nmol L^− 1 dFe, 3 nmol L^− 1 dMn and 40 nmol L^− 1 dAl and returned to 0.6 nmol L^− 1 dFe, 0.5 nmol L^− 1 dMn and 10 nmol L^− 1 dAl towards the end of the cruise three weeks later. A simple steady state model (MADCOW, [Measures, C.I., Brown, E.T., 1996. Estimating dust input to the Atlantic Ocean using surface water aluminium concentrations. In: Guerzoni. S. and Chester. R. (Eds.), The impact of desert dust across the Mediterranean, Kluwer Academic Publishers, The Netherlands, pp. 301–311.]) was used which relies on surface ocean dAl as a proxy for atmospheric deposition of mineral dust. We estimated dust input at 1.8 g m^− 2 yr^− 1 (range 1.0–2.9 g m^− 2 yr^− 1) and fluxes of dFe, dMn and dAl were inferred. Mixed layer steady state residence times for dissolved metals were estimated at 1.3 yr for dFe (range 0.3–2.9 yr) and 1.9 yr for dMn (range 1.0–3.8 yr). The dFe residence time may have been overestimated and it is shown that 0.2–0.4 yr is probably more realistic. Using vertical dFe versus Apparent Oxygen Utilization (AOU) relationships as well as a biogeochemical two end member mixing model, regenerative Fe:C ratios were estimated respectively to be 20 ± 6 and 22 ± 5 μmol Fe:mol C. Combining the atmospheric flux of dFe to the upper water column with the latter Fe:C ratio, a ‘new iron’ supported primary productivity of only 15% (range 7%–56%) was deduced. This would imply that 85% (range 44–93%) of primary productivity could be supported by regenerated dFe. The open ocean surface data suggest that the continental shelf is probably not a major source of dissolved metals to the surface of the adjacent open ocean. Continental shelf concentrations of dMn, dFe, and to a lesser extent dAl, were well correlated with salinity and express mixing of a fresher continental end member with Atlantic Ocean water flowing onto the shelf. This means probably that diffusive benthic fluxes did not play a major role at the time of the cruise.     

Warming at 18,000 yr B.P. in the Tropical Andes

Palynological, paleopedological, and glacial geomorphological evidence from the area of the high plain of Bogotá in the Colombian Eastern Cordillera indicates a significant climatic warming around 18,000¹⁴C yr B.P. Comparison of dated vegetation changes, pedogenic episodes, and glacier fluctuations provides the basis for defining the so-called “La Laguna Interstadial” that lasted from 19,500 to 17,000 yr B.P. During this interstadial period, mean annual temperatures in the tropical Andes were up to 4°C higher than during the preceding and following stadial periods, when full-glacial conditions prevailed and temperatures were up to 8°C colder than at present.     

Salinity‐induced increase of the hydraulic conductivity in the hyporheic zone of coastal wetlands

In coastal zones globally, salinization is rapidly taking place due to the combined effects of sea level rise, land subsidence, altered hydrology, and climate change. Although increased salinity levels are known to have a great impact on both biogeochemical and hydrological processes in aquatic sediments, only few studies have included both types of processes and their potential interactions. In the present paper, we used a controlled 3‐year experimental mesocosm approach to test salinity induced interactions and discuss mechanisms explaining the observed hydrological changes. Surface water salinity was experimentally increased from 14 to 140 mmol Cl per L (0.9 and 9 PSU) by adding sea salt which increased pore water salinity but also increased sulfate reduction rates, leading to higher sulfide, and lower methane concentrations. By analyzing slug test data with different slug test analysis methods, we were able to show that hydraulic conductivity of the hyporheic zone increased 2.8 times by salinization. Based on our hydrological and biogeochemical measurements, we conclude that the combination of pore dilation and decreased methane production rates were major controls on the observed increase in hydraulic conductivity. The slug test analysis method comparison allowed to conclude that the adjusted Bouwer and Rice method results in the most reliable estimate of the hydraulic conductivity for hyporheic zones. Our work shows that both physical and biogeochemical processes are vital to explain and predict hydrological changes related to the salinization of hyporheic zones in coastal wetlands and provides a robust methodological approach for doing so.     

Erosion rates on subalpine paleosurfaces in the western Mediterranean by in-situ <Superscript>10</Superscript>Be concentrations in granites: implications for surface processes and long-term landscape evolution in Corsica (France)

A study of erosion rates by in-situ ¹⁰Be concentrations in granites of Miocene high-elevation paleosurfaces in Corsica indicates maximum erosion rates between 8 and 24 mm/kyear. The regional distribution of measured erosion rates indicates that the local climatic conditions, namely precipitation, the petrographic composition of granites, and the degree of brittle deformation govern erosion rates. Chemical erosion dominates even at elevations around 2,000 m in presently subalpine climate conditions. Field evidence indicates that erosion operates by continuous dissolution and/or disintegration to grains (grusification). The erosion rates are relatively high with respect to the preservation of inferred Early Miocene landscapes. We infer temporal burial in the Middle Miocene and significantly lower erosion rates in the Neogene until ∼3 Ma to explain the preservation of paleosurfaces, in line with fission track data. Valley incision rates that are a magnitude higher than erosion rates on summit surfaces result in relief enhancement and long-term isostatic surface uplift. On the other hand, widening and deepening of valleys by cyclic glaciation progressively destroys the summit surface relics.

The beginning heights and light curves of high‐altitude meteors

Abstract— In this paper, we provide an overview of meteors with high beginning height. During the recent Leonid meteor storms, as well as within the regular double station video observations of other meteor showers, we recorded 164 meteors with a beginning height above 130 km. We found that beginning heights between 130 and 150 km are quite usual, especially for the Leonid meteor shower. Conversely, meteors with beginning heights above 160 km are very rare even among Leonids. From the meteor light curves, we are able to distinguish two different processes that govern radiation of the meteors at different altitudes. Light curves vary greatly above 130 km and exhibit sudden changes in meteor brightness. Sputtering from the meteoroid surface is the dominating process during this phase of the meteor luminous trajectory. Around 130 km, the process switches to ablation and the light curves become similar to the light curves of standard meteors. The sputtering model was successfully applied to explain the difference in the beginning heights of high‐altitude Leonid and Perseid meteors. We show also that this process in connection with high altitude fragmentation could explain the anomalously high beginning heights of several relatively faint meteors.     

Cyclic channel-shoal dynamics at the Ameland inlet: the impact on waves,tides, and sediment transport

Ocean Dynamics - Ebb-tidal deltas are shallow features seaward of tidal inlets, acting as a wave filter for the nearby barrier island and a source of sediment for the landward tidal basin. On many...