Transboundary impacts on regional ground water modeling in Texas

Recent legislation required regional grassroots water resources planning across the entire state of Texas. The Texas Water Development Board (TWDB), the state's primary water resource planning agency, divided the state into 16 planning regions. Each planning group developed plans to manage both ground water and surface water sources and to meet future demands of various combinations of domestic, agricultural, municipal, and industrial water consumers. This presentation describes the challenges in developing a ground water model for the Llano Estacado Regional Water Planning Group (LERWPG), whose region includes 21 counties in the Southern High Plains of Texas. While surface water is supplied to several cities in this region, the vast majority of the regional water use comes from the High Plains aquifer system, often locally referred to as the Ogallala Aquifer. Over 95% of the ground water demand is for irrigated agriculture. The LERWPG had to predict the impact of future TWDB-projected water demands, as provided by the TWDB, on the aquifer for the period 2000 to 2050. If detrimental impacts were noted, alternative management strategies must be proposed. While much effort was spent on evaluating the current status of the ground water reserves, an appropriate numerical model of the aquifer system was necessary to demonstrate future impacts of the predicted withdrawals as well as the effects of the alternative strategies. The modeling effort was completed in the summer of 2000. This presentation concentrates on the political, scientific, and nontechnical issues in this planning process that complicated the modeling effort. Uncertainties in data, most significantly in distribution and intensity of recharge and withdrawals, significantly impacted the calibration and predictive modeling efforts. Four predictive scenarios, including baseline projections, recurrence of the drought of record, precipitation enhancement, and reduced irrigation demand, were simulated to identify counties at risk of low final ground water storage volume or low levels of satisfied demand by 2050.     

Influence of shear angle on hangingwall deformation during tectonic inversion

Tectonic inversion is a common phenomenon in island arc settings, especially in back‐arc basins. The reactivation of normal faults as thrusts, triggered by tectonic inversion, produces typical inversion fault‐related folds and thrusts in the hangingwall. These hangingwall inversion geometries are affected by two factors: the geometry of the underlying master fault and the angle of inclined simple shear relative to the regional dip of strata, in the case that the deformation is approximated by simple shear. This study employed numerical simulations to analyse the influence of the antithetic shear angle on the geometry of the hangingwall and displacement along the master fault. The simulation results reveal that a steeply inclined shear vector during extension produces a narrow, steep‐sided half‐graben, whereas a gently inclined shear produces a wide, open basin. After tectonic inversion, a tight anticline is formed under steeply inclined shear, whereas an open anticline is formed under gently inclined shear. Antithetic shear results in reduced total displacement along the master fault, and the greater the angle between the shear direction and the regional dip, the greater the displacement along the master fault. Because the deformation geometry of syn‐extension layers is affected by extension followed by contraction, a change in the shear angle during tectonic inversion produces a wide variety of deformation geometries. Comparison of the simulation results with the results of analogue modelling suggests that the shear angle decreases by 5° during the transition from extension to tectonic inversion and that such a change may be commonly observed in natural geological structures. These results highlight the benefits of numerical simulations, which can be used to readily examine a variety of constraining parameters and thereby lead to a better understanding of the mechanism of hangingwall deformation, avoiding erroneous estimates of the amount of fault displacement.     

Characterization of the crust of the Coast Mountains Batholith,British Columbia,from P to S converted seismic waves and petrologic modeling

The late Triassic to early Tertiary Coast Mountains Batholith (CMB) of British Columbia provides an ideal locale to study the processes whereby accreted terranes and subduction-related melts interact to form stable continental crust of intermediate to felsic composition and complementary ultramafic residuals. Seismic measurements, combined with calculated elastic properties of various CMB rock compositions, provide a window into the deep-crustal lithologies that are key to understanding the processes of continental growth and evolution. We use a combination of seismic observations and petrologic modeling to construct hypothetical crustal sections at representative locations across the CMB, then test the viability of these sections via forward modeling with synthetic seismic data. The compositions that make up our petrologic forward models are based on calculations using the free energy minimization program Perple_X to predict mineral assemblages at depth for the bulk compositions of exposed plutonic rocks collected in the study area. Seismic data were collected along two transects in west-central British Columbia: a southern line that crossed the CMB near the town of Bella Coola (near 52° N), and a northern line centered on the towns of Terrace and Kitimat (near 54° N). Along both transects, seismic receiver functions reveal high V_p/V_s ratios near the Insular/Intermontane terrane boundary and crustal thickness increasing from 26 ± 3 km to 34 ± 3 km (at the 1 sigma certainty level) from west to east across the Coast Shear Zone (CSZ). On the southern line, we observe an anomalous region of complex receiver functions and diminished Moho signals beneath the central portion of the CMB. Our petrologic and seismic profiles show that observed seismic data from much of the CMB can be well-matched in terms of crustal thickness and structure, average V_p/V_s, and amplitude of the Moho converted phase, without including ultramafic residual material in the lower crust.     

Influence of oscillating flow on hyporheic zone development

The hyporheic zone is an ecologically important ecotone that describes the extent to which nutrient-rich surface waters penetrate the shallow subsurface adjacent to a flowing surface water body. Although steady-state models satisfactorily explain the incursion of surface water into the subsurface as a function of head gradients developed across streambed riffles, they fail to account for the depth that surface water is observed to penetrate the subsurface or for the extent to which the hyporheic zone develops adjacent to the stream channel. To investigate these issues, transient flow modeling has been conducted at the riffle scale and supported by data for an instrumented site in northern Ontario where stream-stage fluctuations are strictly regulated. Model results show that daily stream-stage fluctuations between 0.6 and 4 m produce oscillating solute flow paths that typically reduce residence times of water and solutes in the hyporheic zone from 60 days or more under steady-state conditions to less than 1 day. Furthermore, similar stream-stage fluctuations increase the depth that solutes pervade the subsurface and banks lateral to the stream from around 1 m under steady-state conditions to as much as 2 and 10 m, respectively. The results demonstrate that the transient flow conditions triggered in the subsurface by variable stream stage can exert a strong influence on hyporheic zone development and have important implications for the hyporheos. The results are especially important for hyporheic communities that may survive gradual changes to their living conditions by migrating to more hospitable aquatic habitats, but are unable to respond to rapid changes provoked by more extreme hydrological events.     

Microbial responses using denaturing gradient gel electrophoresis to oil and chemical dispersant in enclosed ecosystems

Microbial responses to the addition of oil with or without a chemical dispersant were examined in mesocosm and microcosm experiments by using denaturing gradient gel electrophoresis of bacterial ribosomal DNA and direct cell counting. When a water-soluble fraction of oil was added to seawater, increases in cell density were observed in the first 24h, followed by a decrease in abundance and a change in bacterial species composition. After addition of an oil-dispersant mixture, increases in cell density and changes in community structure coincided, and the amount of bacteria remained high. These phenomena also occurred in response to addition of only dispersant. Our results suggest that the chemical dispersant may be used as a nutrient source by some bacterial groups and may directly or indirectly prevent the growth of other bacterial groups.     

Distribution and fluxes of metals in the St. Lawrence River from the outflow of Lake Ontario to Québec City

Six anchor stations in the St. Lawrence River from the outflow of Lake Ontario to Quebec City, were occupied for ca. 24 hours in June 1987 during low flow conditions. Samples of water and suspended particulate matter were separated by continuous-flow centrifugation, and were collected every two hours.During this sampling period, fluxes of dissolved forms of zinc, copper and nickel increased in Lac St. François and downstream relative to the sum of the fluxes for the two upstream stations at the outflow of Lake Ontario. Increases in the flux of dissolved zinc and copper were pronounced below Montreal and above Lac St. Pierre. For particulate forms of metals, all five metals show that there are significant inputs in the section of the St. Lawrence River between Lac St. François and the station just above the entrance to Lac St. Pierre.The average concentrations of dissolved cadmium, lead, zinc, copper and nickel ranged from 7–23 ng/l; 9–35 ng/l; 0.434–0.939 g/l; 0.15–0.89 g/l and 0.58–1.12 g/l respectively.Regression analysis of the dissolved and particulate metal concentrations suggests that the concentration of dissolved cadmium, lead, zinc and nickel can be predicted from the regression equation and the determination of particulate metal concentration. This prediction appears to be independent of the suspended particulate matter concentration which varies from ca. 1 to 10 mg/l from the outflow of Lake Ontario to Québec City.     

Agricultural lands are hot-spots for annual runoff polluting the southern Great Barrier Reef lagoon

The world’s largest coral reef ecosystem, the Great Barrier Reef (GBR), continues to be degraded from land-based pollution. Information about the source of pollutants is critical for catchment management to improve GBR water quality. We report here on an 11-year source to sea study of pollutant delivery in runoff from the Fitzroy River Basin (FRB), the largest GBR catchment. An innovative technique that relates land use to pollutant generation is presented. Study results indicate that maximum pollutant concentrations at basin and sub-catchment scales are closely related to the percentage area of croplands receiving heavy rain. However, grazing lands contribute the majority of the long-term average annual load of most common pollutants. Findings suggest improved land management targets, rather than water quality targets should be implemented to reduce GBR pollution. This study provides a substantial contribution to the knowledge base for the targeted management of pollution ‘hot-spots’ to improve GBR water quality.     

Multispectral thermal infrared mapping of the 1 October 1988 Kupaianaha flow field,Kilauea volcano,Hawaii

Multispectral thermal infrared radiance measurements of the Kupaianaha flow field were acquired with the NASA airborne Thermal Infrared Multispectral Scanner (TIMS) on the morning of 1 October 1988. The TIMS data were used to map both the temperature and emissivity of the surface of the flow field. The temperature map depicted the underground storage and transport of lava. The presence of molten lava in a tube or tumulus resulted in surface temperatures that were at least 10° C above ambient. The temperature map also clearly defined the boundaries of hydrothermal plumes which resulted from the entry of lava into the ocean. The emissivity map revealed the boundaries between individual flow units within the Kupaianaha field. In general, the emissivity of the flows varied systematically with age but the relationship between age and emissivity was not unique. Distinct spectral anomalies, indicative of silica-rich surface materials, were mapped near fumaroles and ocean entry sites. This apparent enrichment in silica may have resulted from an acid-induced leaching of cations from the surfaces of glassy flows. Such incipient alteration may have been the cause for virtually all of the emissivity variations observed on the flow field, the spectral anomalies representing areas where the acid attack was most intense.     

Geophysical Expression of Low Sulphidation Epithermal Au-Ag Deposits and Exploration Implications –Examples from the Hokusatsu Region of SW Kyushu, Japan–

Abstract: Low sulphidation epithermal Au-Ag deposits constitute a major exploration target for many mining companies worldwide. These deposits are commonly characterized by quartz vein systems which formed at temperatures often in the range 150–250°C giving rise to major alteration halos. Accompanying mineralization and associated alteration is the destruction and redistribution of magnetite in the host rocks and the formation of various K-bearing minerals such as adularia, illite and alunite. These alteration halos can often cover an area of at least several square kilometres and as such have the potential to be detected during reconnaissance geological surveys utilizing high resolution airborne aeromagnetic and radiometric sensors.
Analysis of airborne magnetic and radiometric data recently acquired over the Hokusatsu Region of SW Kyushu indicates that major low sulphidation epithermal Au-Ag deposits are characterized by several distinct geophysical features varying with the degree of post-mineralization cover and level of erosion. Several deposits coincide with extensive magnetic "flat" and high radiometric K–counts. In addition, several workers have shown that a very close association exists between Bouguer gravity highs and epithermal Au mineralization in the Hokusatsu Region. The combined use of areomagnetics, radiometrics and gravity data therefore provides an exceptionally effective approach to exploration for low sulphidation epithermal Au–Ag deposits in the Hokusatsu Region of Japan.     

Organic facies and geochemical aspects in Neogene neritic sediments of the Takafu syncline area of central Japan: Paleoenvironmental and sedimentological reconstructions

Abstract Organic petrological observations of kerogen macerals and organic geochemical analyses of carbon isotopes of kerogen macerals and biomarkers were conducted on Neogene neritic sediments of the Takafu syncline area of central Japan. The Senmi, Sakainomiya and Lower Shigarami Formations in that area were deposited at the neritic provinces on the southern edge of the paleo‐Japan Sea during the Late Miocene to Early Pliocene. Sedimentary organic matter in these formations was almost terrigenous in origin. Changes in kerogen maceral compositions reflect sedimentological and tectonic histories evaluated in previous studies from sedimentary facies and paleontology. It was found that carbon isotope ratios (δ¹³C) of kerogen macerals increased from ?28‰ to ?25‰ from the Sakainomiya to the lower part of the Lower Shigarami Formations. The cause of that increase was presumably the expansion of C₄ plants into southwest Japan. The timing was concordant with that of the expansion of C₄ plant grasslands in East Asia. The oxicity (oxic to anoxic) conditions of sea bottoms evaluated from pristane/phytane ratios varied. Particularly, in the lower part of the Senmi Formation, layers in which no steroid biomarkers could be detected were found, and had presumably formed under oxic conditions when strong biodegradation had occurred. Concentrations of regular (C₂₇–C₂₉) steranes and dinosteranes were higher in the Sakainomiya and Lower Shigarami Formations. This indicates that dinoflagellates‐dominant primary productions were higher at those stages. In addition, concentrations of diatomaceous biomarkers such as C₂₆ norsterane increased from the Lower Shigarami Formation, thus adding diatoms to the major producers. Furthermore, similar associations between the increases of δ¹³C values of kerogen macerals and concentrations of diatomaceous biomarkers were observed in the Takafu syncline area. Thus, the expansion of C₄ plants was possibly associated with the high production of diatom in the shallow‐marine areas of the paleo‐Japan Sea during the Neogene Period.