Cosmic‐ray exposure age and heliocentric distance of the parent body of the Rumuruti chondrite PRE 95410

We measured concentrations and isotopic ratios of noble gases in the Rumuruti (R) chondrite Mount Prestrud (PRE) 95410, a regolith breccia exhibiting dark/light structures. The meteorite contains solar and cosmogenic noble gases. Based on the solar and cosmogenic noble gas compositions, we calculated a heliocentric distance of its parent body, a cosmic‐ray exposure age on the parent body regolith (parent body exposure age), and a cosmic‐ray exposure age in interplanetary space (space exposure age) of the meteorite. Assuming a constant solar wind flux, the estimated heliocentric distance was smaller than 1.4 ± 0.3 au, suggesting inward migration from the asteroid belt regions where the parent body formed. The largest known Mars Trojan 5261 Eureka is a potential parent body of PRE 95410. Alternatively, it is possible that the solar wind flux at the time of the parent body exposure was higher by a factor of 2–3 compared to the lunar regolith exposure. In this case, the estimated heliocentric distance is within the asteroid belt region. The parent body exposure age is longer than 19.1 Ma. This result indicates frequent impact events on the parent body like that recorded for other solar‐gas‐rich meteorites. Assuming single‐stage exposure after an ejection event from the parent body, the space exposure age is 11.0 ± 1.1 Ma, which is close to the peak of ~10 Ma in the exposure age distribution for the solar‐gas‐free R chondrites.     

Variation in noble gas isotopic composition of gas samples from the Aegean arc, Greece

In contrast to most other arcs with oceanic plate subduction, the Aegean arc is characterized by continent–continent subduction. Noble gas abundances and isotopic compositions of 45 gas samples have been determined from 6 volcanoes along the arc, 2 islands in the back-arc region and 7 sites in the surrounding areas. The ³He/⁴He ratios of the samples ranged from 0.027R_A to 6.2R_A (R_A denotes the atmospheric ³He/⁴He ratio of 1.4×10⁻⁶), demonstrating that even the maximum ³He/⁴He ratio in the region is significantly lower than the maximum ratios of most oceanic subduction systems, which are equal to the MORB value of 8±1 R_A. Regional variations in the ³He/⁴He ratio were observed both along and across the arc. The maximum ³He/⁴He ratio was obtained from Nisyros volcano located in the eastern end of the arc, and the ratio decreased westward possibly reflecting the difference in potential degree of crustal assimilation or the present magmatic activity in each volcano. Across the volcanic arc, the ³He/⁴He ratio decreased with an increasing distance from the arc front, reaching a low ratio of 0.063R_A in Macedonia, which suggested a major contribution of radiogenic helium derived from the continental crust. At Nisyros, a temporal increase in ³He/⁴He ratio due to ascending subsurface magma was observed after the seismic crisis of 1995–1998 and mantle neon was possibly detected. The maximum ³He/⁴He ratio (6.2R_A) in the Aegean region, which is significantly lower than the MORB value, is not probably due to crustal assimilation at shallow depth or addition of slab-derived helium to MORB-like mantle wedge, but inherent characteristics of the subcontinental lithospheric mantle (SCLM) beneath the Aegean arc.     

http://www.sciencedirect.com/science/article/pii/S1674987112001028

A study on the effect of the solar ultra-violet radiation on the human skin fibroblast cells revealed that the production of matrix metalloproteinase-2 was inhibited by the radiation.A CO2 incubator connected by optical fibers to a reflector telescope for collecting the solar light was built at Syowa station by the 49th Japanese Antarctica Research Expedition.The direction of the telescope was continuously controlled by a sun-tracker to follow the movement of the Sun automatically.The intensity of the collected light was monitored by a portable spectrophotometer housed inside.The human skin fibroblast cells were incubated in the CO2 chamber to investigate the effect of the solar radiation at Syowa station and were compared with those reference experiments at a laboratory in Japan.The results showed cell damage by strong UV radiation.The production of matrix metalloproteinase-2 was prompted by the moderate UV-B,but was inhibited by the strong UV-B radiation,as studied under laboratory conditions in Japan.The effect of strong solar radiation at Syowa station involving the radiation of UV-B region was estimated to be of the same extent of the radiation caused by an artificial UV-B light with the intensity more than 50 mJ/cm2.     

Inversion of DC resistivity data using neural networks

The inversion of geoelectrical resistivity data is a difficult task due to its non-linear nature. In this work, the neural network (NN) approach is studied to solve both 1D and 2D resistivity inverse problems. The efficiency of a widespread, supervised training network, the back-propagation technique and its applicability to the resistivity problem, is investigated. Several NN paradigms have been tried on a basis of trial-and-error for two types of data set. In the 1D problem, the batch back-propagation paradigm was efficient while another paradigm, called resilient propagation, was used in the 2D problem. The network was trained with synthetic examples and tested on another set of synthetic data as well as on the field data. The neural network gave a result highly correlated with that of conventional serial algorithms. It proved to be a fast, accurate and objective method for depth and resistivity estimation of both 1D and 2D DC resistivity data. The main advantage of using NN for resistivity inversion is that once the network has been trained it can perform the inversion of any vertical electrical sounding data set very rapidly.     

Contributions of slab fluid and sediment melt components to magmatism in the Mariana Arc–Trough system: Evidence from geochemical compositions and Sr,Nd, and noble gas isotope systematics

This study presents new major and trace element, mineral, and Sr, Nd, and noble gas isotope geochemical analyses of basalts, gabbro, and clinopyroxenite from the Mariana Arc (Central Islands and Southern Seamount provinces) including the forearc, and the Mariana Trough (Central Graben and Spreading Ridge). Mantle source compositions beneath the Mariana Arc and the Mariana Trough indicate a mantle source that is depleted in high field strength elements relative to MORB (mid‐oceanic ridge basalt). Samples from the Mariana Arc, characterized by high ratios of Ba/Th, U/Th, ⁸⁴Kr/⁴He and ¹³²Xe/⁴He, are explained by addition of fluid from the subducted slab to the mantle wedge. Correlations of noble gas data, as well as large ion lithophile elements, indicate that heavy noble gases (Ar, Kr, and Xe) provide evidence for fluid fluxing into the mantle wedge. On the other hand, major elements and Sr, Nd, He, and Ne isotopic data of basalts from the Mariana Trough are geochemically indistinguishable from MORB. Correlations of ³He/⁴He and ⁴⁰Ar/³⁶Ar in the Mariana Trough samples are explained by mixing between MORB and atmosphere. One sample from the Central Graben indicates extreme enrichment in ²⁰Ne/²²Ne and ²¹Ne/²²Ne, suggesting incorporation of solar‐type Ne in the magma source. Excess ¹²⁹Xe is also observed in this sample suggesting primordial noble gases in the mantle source. The Mariana Trough basalts indicate that both fluid and sediment components contributed to the basalts, with slab‐derived fluids dominating beneath the Spreading Ridge, and that sediment melts, characterized by high La/Sm and relatively low U/Th and Zr/Nb, dominate in the source region of basalts from the Central Graben.     

Deep and Bottom Currents in the Challenger Deep,Mariana Trench,Measured with Super-Deep Current Meters

The bottom currents in the Challenger Deep, the deepest in the world, were measured with super-deep current meters moored at 11°22′ N and 142°35′ E, where the depth is 10915 m. Three current meters were set at 9687 m, 10489 m and 10890 m at the station in the center of the Challenger Deep for 442 days from 1 August 1995 to 16 October 1996. Although rotor revolutions in 60 minutes of recording interval were zero for 37.5% of the time, the maximum current at the deepest layer of 10890 m was 8.1 cm s⁻¹, being composed of tidal currents, inertia motion and long period variations. Two current meters were set at 6608 m and 7009 m at a station 24.9 km north of the center for 443 days from 31 July 1995 to 16 October 1996, and two current meters at 6214 m and 6615 m at a station 40.9 km south of the center for 441 days from 2 August 1995 to 16 October 1996. The mean flow at 7009 m depth at the northern station was 0.7 cm s⁻¹ to 240°T, and that at 6615 m depth at the southern station was 0.5 cm s⁻¹ to 267°T. A westward mean flow prevailed at the stations, and no cyclonic circulation with mean flows of the opposite directions was observed in the Mariana Trench at a longitude of 142°35′ E. Power spectra of daily mean currents showed three spectral peaks at periods of 100 days, 28–32 days and 14–15 days. The peak at 100 day period was common to the power spectra.     

Ore-forming mechanism for the Xiaoxinancha Au-rich Cu deposit in Yanbian,Jilin Province,China: Evidence from noble gas isotope geochemistry of fluid inclusions in minerals

The Xiaoxinancha Au-rich copper deposit is one of important Au-Cu deposits along the continental margin in Eastern China. The deposit consists of two sections: the Beishan mine (North), composed of altered rocks with veinlet-dissemination sulfides and melnicovite-dominated sulfide-quartz veins, and the Nanshan mine (South), composed of pyrrhotite-dominated sulfide-quartz veins and pure sulfide veins. The isotope compositions of noble gases extracted from fluid inclusions in ore minerals, i.e. ratios of 3He/4He, 20Ne/22Ne and40Ar/36Ar are in the ranges of 4.45―0.08 Ra, 10.2―8.8 and 306―430, respectively. Fluid inclusions in minerals from the Nanshan mine have higher 3He/4He and 20Ne/22Ne ratios whereas those from the Beishan mine have lower 3He/4He ratios. The analysis of origin, and evolution of the ore fluids and its relations with the ore-forming stages and the ages of mineralization suggests that the initial hydrothermal fluids probably come from the melts generated by partial melting of oceanic crust with the participation of fluids from the mantle (mantle-plume type)/aesthenosphere. This also corresponds to the continental margin settings during the subduction of Izanagi ocaneic plate towards the palaeo-Asian continent (123―102 Ma). The veinlet-dissemination ore bodies of the Beishan mine were formed through replacement and crystallization of the mixed fluids generated by mixing of the ascending high-temperature boiling fluid with young crustal fluid whereas the melnicovite-dominated sulfide-quartz veins were formed subsequently by filling of the high-temperature ore fluid in fissures. Pyrrhotite-dominated sulfide-quartz veins in the Nanshan mine were formed by filling-deposition-crystallization of the moderate-temperature ore fluids and the pure sulfide veins were formed later by filling-deposition-crystallization of ore substance-rich fluids after boiling of the moderate-temperature ore fluids. The metallogenic dynamic processes can be summarized as: (1) formation of fluidand ore substance-bearing Adakitic magma by degassing, dewatering and partial melting during subduction of the Izanagi plate; (2) separation and formation of ore fluids from the Adakitic magma; and (3) success-sive ascending of the ore fluids and final formation of the Au-rich Cu deposit of veinlet-dissemination and vein types by secondary boiling.     

Electromagnetic anomalies associated with 1995 Kobe earthquake

Occurrences of anomalous electro-magnetic phenomena at varied frequency ranges, covering ELF to VHF, have been reported in relation to the 17 January 1995 Kobe earthquake (M7.2), by several independent research groups. Prominent pre-seismic peaks, which could have been emitted from the focal area, were observed on 9-10 January in ELF, VLF, LF and HF ranges. Whether these changes were truly related to the earthquake is not certain, because atmospheric (thunderbolt discharge) activities also peaked on 9-10 January. The nomalous changes were markedly enhanced toward the catastrophe in agreement with many reports on unusual radio/TV noise. Anomalous transmission of man-made electromagnetic waves in VLF and VHF ranges was also detected from a few days before the earthquake, indicating the possibility that the ionosphere above the focal zone was disturbed at the final stage of the earthquake preparation process.     

Graphitization of carbonaceous matter during metamorphism with references to carbonate and pelitic rocks of contact and regional metamorphisms,Japan

This study is an attempt to correlate the graphitization process of carbonaceous matter during metamorphism with metamorphic grade. Graphitization can be parameterized using crystal structure and chemical and isotopic compositions. The extent of graphitization could be characterized mainly by temperature, duration of metamorphism and rock composition. We compared the graphitization trends for two metamorphic terrains, a contact aureole of the Kasuga area and a regional metamorphic terrain of high-temperature/low pressure type of the Ryoke metamorphic terrain in Northern Kiso area, Central Japan, and for two different lithologies (carbonate and pelite), using X-ray diffractogram, DTA-TG analysis, and chemical and stable isotope analyses. During contact metamorphism, graphitization and carbon isotopic exchange reactions proceeded simultaneously in pelitic and carbonate rocks. The decreases in basal spacing d(002) of the carbonaceous matter in carbonate rocks is greatly accelerated at temperatures higher than about 400° C. Furthermore, carbon isotopic ratios of graphite in carbonate rocks also change to ¹³C-enriched values implying exchange with carbonates. The beginning of this enrichment of ¹³C in the carbonaceous matter coincides with an abrupt increase of the graphitization processes. Carbon isotopic shifting up to 5 in pelites could be observed as metamorphic temperature increased probably by about 400° C. Carbonaceous matter in pelitic rocks is sometimes a mixture of poorly crystallized organic matter and well-crystallized graphite detritus. DTA-TG analysis is an effective tool for the distinction of detrital graphitic material. Two sources for the original carbon isotopic composition of carbonaceous matter in pelites in the Kasuga contact aureole can be distinguished, about-28 and-24 regardless of the presence of detrital graphite, and were mainly controlled by depositional environment of the sediments. Graphitization in limestones and pelitic rocks in regional metamorphism proceeds further than in a contact aureole. In the low-temperature range, the differences in extent of graphitization between the two metamorphic regions is large. However, at temperatures higher than 600° C, the extent of graphitization in both regions is indistinguishable. The degree of graphitization is different in limestones and pelitic rocks from the Ryoke metamorphic terrain. We demonstrate that the graphitization involves a progressive re-construction process of the crystal structure. The sequence of the first appearance of crystal inter planar spacing correlates with the metamorphic grade and indicates the crystal growth of three-dimensional structured graphite.     

Density measurements of liquid Fe–Si alloys at high pressure using the sink–float method

The compositional dependence on the density of liquid Fe alloys under high pressure is important for estimating the amount of light elements in the Earth’s outer core. Here, we report on the density of liquid Fe–Si at 4 GPa and 1,923 K measured using the sink–float method and our investigation on the effect of the Si content on the density of the liquid. Our experiments show that the density of liquid Fe–Si decreases from 7.43 to 2.71 g/cm³ non-linearly with increasing Si content (0–100 at%). The molar volume of liquid Fe–Si calculated from the measured density gradually decreases in the compositional range 0–50 at% Si, and increases in the range 50–100 at% Si. It should be noted that the estimated molar volume of the alloys shows a negative volume of mixing between Fe and Si. This behaviour is similar to Fe–S liquid (Nishida et al. in Phys Chem Miner 35:417–423, 2008). However, the excess molar volume of mixing for the liquid Fe–Si is smaller than that of liquid Fe–S. The light element contents in the outer core estimated previously may be an underestimation if we take into account the possible negative value of the excess mixing volume of iron–light element alloys in the outer core.