Bottom pressure change associated with the 2004–2005 large meander of the Kuroshio south of Japan

A large meander of the Kuroshio was generated in the region off the southern coast of Japan in August 2004 and continued until approximately July 2005. The formation and decay of the large-meander (LM) path was observed by bottom pressure (BP) sensors installed on inverted echo sounders (PIESs) and a seismic observing system off Shikoku. The variation in BP was examined focusing on the development, persistence, and decay of the LM path. The BP was found to be depressed associated with a Kuroshio path disturbance, called a small meander, and this BP depression led the sea surface height (SSH) depression by up to approximately two months. The temporal phase shift between the sea surface and deep disturbances was significantly greater than those of other small meanders that did not develop into large meanders. After the formation of the LM path, the BP beneath the Kuroshio increased with a lag of approximately two months behind the SSH elevation along with the upward displacement of the main thermocline. The increase in BP is associated with that of the positive southward BP gradient anomaly, i.e., the eastward deep Kuroshio current anomaly, which suggests an enhancement of the topographic steering and stability of the LM path. This is consistent with the fact that no small meanders occurred in the early LM period from late July 2004 to late January 2005.     

Seismic electric signals in seismic prone areas

The Varotsos-Alexopoulos-Nomicos(VAN) method of short-term earthquake prediction was introduced in the 1980s. The VAN method enables estimation of the epicenter, magnitude and occurrence time of an impending earthquake by observing transient changes of the electric field of the Earth termed seismic electric signals(SES). Here, we present a few examples of SES observed in various earthquake prone areas worldwide.     

Spatial variation in low-level <Superscript>134</Superscript>Cs in the coastal sediments off central Honshu in the Sea of Japan: implications for delivery,migration, and redistribution patterns

In 2014 and 2015, we examined the spatial distribution of cesium-134 (half-life: 2.06 years) from the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) in marine sediments within coastal–basin areas (water depths of 40–520 m) off central Honshu Island (the main island of Japan) in the Sea of Japan. The ¹³⁴Cs concentrations in both the surface sediment (0–1 cm depth) and whole-core inventory exhibited wide variations, and were highest at the site closest to the Agano River Estuary area (6.7 Bq/kg-dry and 886 Bq/m², respectively). This indicates that ¹³⁴Cs in coastal areas was delivered by riverine suspended solids (SS). Given the spatial variation in ¹³⁴Cs concentrations, we believe that ¹³⁴Cs partially migrated northeastward within ~50 km along Honshu Island (at water depths shallower than ~140 m), and southwestward, including the Sado Basin area. This is predominantly attributable to the transport of SS by bottom currents and unsteady downward delivery onto the steep slopes of the basin. The total amount of ¹³⁴Cs in the study area in 2014 was estimated at approximately 0.6 TBq (decay-corrected to March 11, 2011, date of FDNPP accident).     

Scoria cone formation through a violent Strombolian eruption: Irao Volcano, SW Japan

Scoria cones are common volcanic features and are thought to most commonly develop through the deposition of ballistics produced by gentle Strombolian eruptions and the outward sliding of talus. However, some historic scoria cones have been observed to form with phases of more energetic violent Strombolian eruptions (e.g., the 1943–1952 eruption of Parícutin, central Mexico; the 1975 eruption of Tolbachik, Kamchatka), maintaining volcanic plumes several kilometers in height, sometimes simultaneous with active effusive lava flows. Geologic evidence shows that violent Strombolian eruptions during cone formation may be more common than is generally perceived, and therefore it is important to obtain additional insights about such eruptions to better assess volcanic hazards. We studied Irao Volcano, the largest basaltic monogenetic volcano in the Abu Monogenetic Volcano Group, SW Japan. The geologic features of this volcano are consistent with a violent Strombolian eruption, including voluminous ash and fine lapilli beds (on order of 10^?1 km³ DRE) with simultaneous scoria cone formation and lava effusion from the base of the cone. The characteristics of the volcanic products suggest that the rate of magma ascent decreased gradually throughout the eruption and that less explosive Strombolian eruptions increased in frequency during the later stages of activity. During the eruption sequence, the chemical composition of the magma became more differentiated. A new K–Ar age determination for phlogopite crystallized within basalt dates the formation of Irao Volcano at 0.4?±?0.05 Ma.     

Two extraterrestrial dust horizons found in the Dome Fuji ice core,East Antarctica

Two silicate-rich dust layers were found in the Dome Fuji ice core in East Antarctica, at Marine Isotope Stages 12 and 13. Morphologies, textures, and chemical compositions of constituent particles reveal that they are high-temperature melting products and are of extraterrestrial origin. Because similar layers were found ～ 2000 km east of Dome Fuji, at EPICA (European Project for Ice Coring in Antarctica)-Dome C, particles must have rained down over a wide area 434 and 481 ka. The strewn fields occurred over an area of at least 3 × 10⁶ km². Chemical compositions of constituent phases and oxygen isotopic composition of olivines suggest that the upper dust layer was produced by a high-temperature interaction between silicate-rich melt and water vapor due to an impact explosion or an aerial burst of a chondritic meteoroid on the inland East Antarctic ice sheet. An estimated total mass of the impactor, on the basis of particle flux and distribution area, is at least 3 × 10⁹ kg. A possible parent material of the lower dust layer is a fragment of friable primitive asteroid or comet. A hypervelocity impact of asteroidal/cometary material on the upper atmosphere and an explosion might have produced aggregates of sub-μm to μm-sized spherules. Total mass of the parent material of the lower layer must exceed 1 × 10⁹ kg. The two extraterrestrial horizons, each a few millimeters in thickness, represent regional or global meteoritic events not identified previously in the Southern Hemisphere.     

北吕宋岛菲律宾活动带蛇绿岩及其上覆浊积岩的放射虫研究新进展

The basement of the Philippine Mobile Belt (PMB) is mainly composed of ophiolites that are mostly overlain by Paleogene to Miocene turbidites in central Luzon. To clarify the geological development of the PMB with respect to the initial stage of the arc volcanism (eg. Yumul et al., 2003, 2008; Dimalanta and Yumul, 2003; Suzuki et al., 2011), radiolarian dating was examined in siliceous sediments associated with the ophiolites and turbidites. The samples were collected from sites identified with the Zambales and Montalban ophiolites, basic tuff phyllites in NW Din-galan, and their overlying formations.     

Pressure and temperature dependence of the viscosity of a NaAlSi<Subscript>2</Subscript>O<Subscript>6</Subscript> melt

The viscosity of a silicate melt of composition NaAlSi₂O₆ was measured at pressures from 1.6 to 5.5 GPa and at temperatures from 1,350 to 1,880°C. We employed in situ falling sphere viscometry using X-ray radiography. We found that the viscosity of the NaAlSi₂O₆ melt decreased with increasing pressure up to 2 GPa. The pressure dependence of viscosity is diminished above 2 GPa. By using the relationship between the logarithm of viscosity and the reciprocal temperature, the activation energies for viscous flow were calculated to be 3.7 ± 0.4 × 10² and 3.7 ± 0.5 × 10² kJ/mol at 2.2 and 2.9 GPa, respectively.     

DGPS and RTK Positioning Using the Internet

The Internet as a basis for Real-Time Kinematic (RTK) and differential Global Positioning System (DGPS) service provides many advantages for worldwide GPS users. Among these advantages are service unification, open architecture, bidirectional communication, and scalability. The current development of this service allows users to use RTK and DGPS through the Internet with conventional accuracy over the short and medium baselines. The perspective for this service lies in the field of wide-area augmentation systems (WASS). At this stage of the Internet-based RTK and DGPS service project, the general concept, system components, draft standards, and software are developed. ? 2000 John Wiley & Sons, Inc.     

Noble gases in metal and schreibersite of the Acuña (IIIAB) iron meteorite

Abstract— We measured abundances and isotopic compositions of noble gases in metal and schreibersite of the Acuña (IIIAB) iron meteorite. The concentrations of noble gases in Acuña metal are very low compared to those reported so far for other iron meteorites. The isotopic ratios of He, Ne and Ar indicate that they are mostly of cosmogenic origin. Cosmogenic components are even present in Kr and Xe, which could not have been produced from Fe, Ni and P and are probably due to the spallation of trace elements of higher masses. The high ⁴He/²¹Ne ratio of 420 in Acuña metal indicates that the samples were at a deep position within a very large meteoroid. The exposure ages of Acuña were estimated to be 50–200 Ma from ³He, ²¹Ne and ³⁸Ar abundances and by utilizing the diagrams of production rates vs. the ⁴He/²¹Ne ratio based on the Signer-Nier model. The low exposure age of Acuña may indicate a history different from that of other IIIAB irons whose exposure ages cluster at ～670 Ma. Otherwise, Acuña may be one of the samples with the low production rate, which can not be estimated from the diagrams of the Signer-Nier model.     

Sound velocity and elastic properties of Fe–Ni and Fe–Ni–C liquids at high pressure

The sound velocity (V _P) of liquid Fe–10 wt% Ni and Fe–10 wt% Ni–4 wt% C up to 6.6 GPa was studied using the ultrasonic pulse-echo method combined with synchrotron X-ray techniques. The obtained V _P of liquid Fe–Ni is insensitive to temperature, whereas that of liquid Fe–Ni–C tends to decrease with increasing temperature. The V _P values of both liquid Fe–Ni and Fe–Ni–C increase with pressure. Alloying with 10 wt% of Ni slightly reduces the V _P of liquid Fe, whereas alloying with C is likely to increase the V _P. However, a difference in V _P between liquid Fe–Ni and Fe–Ni–C becomes to be smaller at higher temperature. By fitting the measured V _P data with the Murnaghan equation of state, the adiabatic bulk modulus (K _S0) and its pressure derivative (K _S ^′ ) were obtained to be K _S0 = 103 GPa and K _S ^′  = 5.7 for liquid Fe–Ni and K _S0 = 110 GPa and K _S ^′  = 7.6 for liquid Fe–Ni–C. The calculated density of liquid Fe–Ni–C using the obtained elastic parameters was consistent with the density values measured directly using the X-ray computed tomography technique. In the relation between the density (ρ) and sound velocity (V _P) at 5 GPa (the lunar core condition), it was found that the effect of alloying Fe with Ni was that ρ increased mildly and V _P decreased, whereas the effect of C dissolution was to decrease ρ but increase V _P. In contrast, alloying with S significantly reduces both ρ and V _P. Therefore, the effects of light elements (C and S) and Ni on the ρ and V _P of liquid Fe are quite different under the lunar core conditions, providing a clue to constrain the light element in the lunar core by comparing with lunar seismic data.