The age of the Roter Kamm impact crater,Namibia: Constraints from 40Ar-39Ar,K-Ar,Rb-Sr,fission track,and 10Be-26Al studies

Abstract The well-preserved 2.5 km diameter Roter Kamm impact crater is located in the Namib desert in Namibia. The impact has occurred in Precambrian granitic and granodioritic orthogneisses of the 1200–900 Ma old Namaqualand Metamorphic Complex which were partly covered by Gariep metasediments; the granites are invaded by quartz veins and quartz-feldspar-pegmatites. Previous geological field evidence suggested a crater age of about 5–10 Ma. In order to constrain this age, we selected a set of basement rocks (granites, granodiorites) exposed at the crater rim and studied the Rb-Sr, K-Ar, ⁴⁰Ar-³⁹Ar, and ¹⁰Be-²⁶Al isotopic systems as well as apatite fission track ages of these samples. The Rb-Sr isotopic systematics confirm the derivation of these samples from the Namaqualand basement (age about 1.29 Ga), which underwent Damaran orogenesis at about 650 Ma. No basement rocks with Rb-Sr ages younger than about 410 Ma were identified. The K-Ar ages of pseudotachylite and melt breccia samples show that these samples are dominated by incompletely degassed fragments of basement rocks, with some retaining their original metamorphic ages of about 470 Ma. The apatite fission track ages range from 20–28 Ma, which may be interpreted as an extension of the 25 Ma Burdigalian peneplanation event, or as incomplete resetting of the apatite fission tracks during the impact event. The ¹⁰Be and ²⁶Al exposure age of a quartz sample isolated from a quartz-pegmatite was found to be 150 ka; it is likely that the exposure of the sample began after material covering it had been removed by erosion 150 ka ago. Two glassy fractions extracted from a rim granite were dated by ⁴⁰Ar-³⁹Ar analysis. One sample gives practically a plateau age of 3.7 ± 0.3 Ma, while the other gives a minimum age of 3.6 Ma. The best available age estimate for the Roter Kamm crater is therefore 3.7 ± 0.3 Ma.     

A surface complexation model for sulfate and selenate on iron oxides consistent with spectroscopic and theoretical molecular evidence

Sulfate and selenate adsorption on iron oxides are important reactions in natural systems under a very wide range of pH values, ionic strengths, and electrolyte compositions. Under such conditions, spectroscopic and theoretical calculations have demonstrated the potential importance of a variety of surface species. Understanding the variations in the surface speciation of these oxyanions is fundamental to prediction of their partitioning between minerals and aqueous solutions. In the present study, published experimental spectroscopic and theoretical molecular evidence of the identity of sulfate/selenate surface species are integrated with a surface complexation model consistent with a wide variety of experimental adsorption, surface titration, and proton coadsorption data to define the surface speciation of sulfate and selenate on iron oxides under a wide range of conditions. The analysis was carried out with the extended triple layer model (ETLM) taking into account the electrostatics of water dipole desorption during ligand exchange reactions. On seven out of eight goethites studied, sulfate and selenate surface reactions can be represented by the formation of a monodentate-mononuclear inner-sphere and a bidentate-binuclear outer-sphere (or H-bonded) species according to

     

Short-term earthquake prediction: Current status of seismo-electromagnetics

Loss of human lives as a result of earthquakes is caused overwhelmingly by the collapse of buildings within less than a few minutes of main shocks. The most urgent countermeasure consists of two key elements. One is strengthening of weak structures and the other is short-term earthquake prediction. Short-term prediction needs precursors. Although some promising precursors are reported, the prevailing views in Japan and elsewhere are overly pessimistic. The pessimism largely roots in the fact that short-term precursors are generally non-seismic and tools developed for seismology are not designed to detect them. Nonetheless, nationally funded large-scale earthquake prediction programs always emphasize the need to reinforce seismometer networks. They do not take into account the views of those in the science community who point to the importance of non-seismic precursors. While there are well-founded causes to be skeptical, the situation needs to be improved. One reason for skepticism is that the observations of precursors have not yet been perfect enough and another is that some important fundamental aspects of non-seismic precursors are still unresolved. We review some of these problems.     

Sound velocity and density of liquid Ni68S32 under pressure using ultrasonic and X-ray absorption with tomography methods

A new experimental setup for simultaneous P-wave velocity (V_P) and density (ρ) measurements for liquid alloys is developed using ultrasonic and X-ray absorption methods combined with X-ray tomography at high pressures and high temperatures. The new setup allows us to directly determine adiabatic bulk moduli (K_S) and to discuss the correlation between the V_P and ρ of the liquid sample. We measured V_P and ρ of liquid Ni₆₈S₃₂ up to 5.6 GPa and 1045 K using this technique. The effect of pressure on the V_P and ρ values of liquid Ni₆₈S₃₂ is similar to that of liquid Fe₅₇S₄₃. (Both compositions correspond to near-eutectic ones.) The obtained K_S values are well fitted to the finite strain equation with a $K_{{\text{S}}_0}$ value (K_S at ambient pressure) of 31.1 GPa and a dK_S/dP value of 8.44. The measured V_P was found to increase linearly with increasing ρ, as approximated by the relationship: V_P [m/s] = 1.29 ρ [kg/m³] – 5726, suggesting that liquid Ni–S follows an empirical linear relationship, Birch's law. The dV_P/dρ slope is similar between Ni₆₈S₃₂ and Fe₅₇S₄₃ liquids, while the V_P–ρ plot of liquid Ni–S is markedly different from that of liquid Fe–S, which indicates that the effect of Ni on Birch's law is important for understanding the V_P–ρ relation of planetary and Moon's molten cores.     

Purely physical separation of a small fraction of the Allende meteorite that is highly enriched in noble gases

Abstract— Fine material that floats during freeze-thaw disaggregation of the Allende meteorite is greatly enriched in noble gases compared to the bulk meteorite. Not only the elemental concentrations, but also most isotopic ratios of the noble gases in this fraction, strongly suggest that this material is very similar to the gas-rich carbonaceous residue isolated from the bulk meteorite by chemical treatment. The only significant difference in noble gas signature between our separated fraction and the chemical residues is that the ¹²⁹Xe/¹³²Xe ratio in the former is significantly lower than that in the latter, which suggests readsorption of ¹²⁹Xe released from the dissolved minerals during the chemical treatment. This is the first time that a gas-rich residue of a meteorite has been separated by a purely physical method alone. We also show that noble gases in phase Q and presolar diamond may be separable physically, although both are closely associated.     

Bottom pressure change associated with the 2004–2005 large meander of the Kuroshio south of Japan

A large meander of the Kuroshio was generated in the region off the southern coast of Japan in August 2004 and continued until approximately July 2005. The formation and decay of the large-meander (LM) path was observed by bottom pressure (BP) sensors installed on inverted echo sounders (PIESs) and a seismic observing system off Shikoku. The variation in BP was examined focusing on the development, persistence, and decay of the LM path. The BP was found to be depressed associated with a Kuroshio path disturbance, called a small meander, and this BP depression led the sea surface height (SSH) depression by up to approximately two months. The temporal phase shift between the sea surface and deep disturbances was significantly greater than those of other small meanders that did not develop into large meanders. After the formation of the LM path, the BP beneath the Kuroshio increased with a lag of approximately two months behind the SSH elevation along with the upward displacement of the main thermocline. The increase in BP is associated with that of the positive southward BP gradient anomaly, i.e., the eastward deep Kuroshio current anomaly, which suggests an enhancement of the topographic steering and stability of the LM path. This is consistent with the fact that no small meanders occurred in the early LM period from late July 2004 to late January 2005.     

Seismic electric signals in seismic prone areas

The Varotsos-Alexopoulos-Nomicos(VAN) method of short-term earthquake prediction was introduced in the 1980s. The VAN method enables estimation of the epicenter, magnitude and occurrence time of an impending earthquake by observing transient changes of the electric field of the Earth termed seismic electric signals(SES). Here, we present a few examples of SES observed in various earthquake prone areas worldwide.     

Spatial variation in low-level <Superscript>134</Superscript>Cs in the coastal sediments off central Honshu in the Sea of Japan: implications for delivery,migration, and redistribution patterns

In 2014 and 2015, we examined the spatial distribution of cesium-134 (half-life: 2.06 years) from the Fukushima Dai-ichi Nuclear Power Plant (FDNPP) in marine sediments within coastal–basin areas (water depths of 40–520 m) off central Honshu Island (the main island of Japan) in the Sea of Japan. The ¹³⁴Cs concentrations in both the surface sediment (0–1 cm depth) and whole-core inventory exhibited wide variations, and were highest at the site closest to the Agano River Estuary area (6.7 Bq/kg-dry and 886 Bq/m², respectively). This indicates that ¹³⁴Cs in coastal areas was delivered by riverine suspended solids (SS). Given the spatial variation in ¹³⁴Cs concentrations, we believe that ¹³⁴Cs partially migrated northeastward within ~50 km along Honshu Island (at water depths shallower than ~140 m), and southwestward, including the Sado Basin area. This is predominantly attributable to the transport of SS by bottom currents and unsteady downward delivery onto the steep slopes of the basin. The total amount of ¹³⁴Cs in the study area in 2014 was estimated at approximately 0.6 TBq (decay-corrected to March 11, 2011, date of FDNPP accident).     

Scoria cone formation through a violent Strombolian eruption: Irao Volcano, SW Japan

Scoria cones are common volcanic features and are thought to most commonly develop through the deposition of ballistics produced by gentle Strombolian eruptions and the outward sliding of talus. However, some historic scoria cones have been observed to form with phases of more energetic violent Strombolian eruptions (e.g., the 1943–1952 eruption of Parícutin, central Mexico; the 1975 eruption of Tolbachik, Kamchatka), maintaining volcanic plumes several kilometers in height, sometimes simultaneous with active effusive lava flows. Geologic evidence shows that violent Strombolian eruptions during cone formation may be more common than is generally perceived, and therefore it is important to obtain additional insights about such eruptions to better assess volcanic hazards. We studied Irao Volcano, the largest basaltic monogenetic volcano in the Abu Monogenetic Volcano Group, SW Japan. The geologic features of this volcano are consistent with a violent Strombolian eruption, including voluminous ash and fine lapilli beds (on order of 10^?1 km³ DRE) with simultaneous scoria cone formation and lava effusion from the base of the cone. The characteristics of the volcanic products suggest that the rate of magma ascent decreased gradually throughout the eruption and that less explosive Strombolian eruptions increased in frequency during the later stages of activity. During the eruption sequence, the chemical composition of the magma became more differentiated. A new K–Ar age determination for phlogopite crystallized within basalt dates the formation of Irao Volcano at 0.4?±?0.05 Ma.     

Two extraterrestrial dust horizons found in the Dome Fuji ice core,East Antarctica

Two silicate-rich dust layers were found in the Dome Fuji ice core in East Antarctica, at Marine Isotope Stages 12 and 13. Morphologies, textures, and chemical compositions of constituent particles reveal that they are high-temperature melting products and are of extraterrestrial origin. Because similar layers were found ～ 2000 km east of Dome Fuji, at EPICA (European Project for Ice Coring in Antarctica)-Dome C, particles must have rained down over a wide area 434 and 481 ka. The strewn fields occurred over an area of at least 3 × 10⁶ km². Chemical compositions of constituent phases and oxygen isotopic composition of olivines suggest that the upper dust layer was produced by a high-temperature interaction between silicate-rich melt and water vapor due to an impact explosion or an aerial burst of a chondritic meteoroid on the inland East Antarctic ice sheet. An estimated total mass of the impactor, on the basis of particle flux and distribution area, is at least 3 × 10⁹ kg. A possible parent material of the lower dust layer is a fragment of friable primitive asteroid or comet. A hypervelocity impact of asteroidal/cometary material on the upper atmosphere and an explosion might have produced aggregates of sub-μm to μm-sized spherules. Total mass of the parent material of the lower layer must exceed 1 × 10⁹ kg. The two extraterrestrial horizons, each a few millimeters in thickness, represent regional or global meteoritic events not identified previously in the Southern Hemisphere.