Mg-enriched erythrite from Bou Azzer,Anti-Atlas Mountains,Morocco: geochemical and spectroscopic characteristics

Mineralogy and Petrology - Supergene Mg-enriched erythrite, with an average composition (Co2.25Mg0.58Ni0.14Fe0.04Mn0.02 Zn0.02) (As1.97P<0.01O8)·8H2O, accompanied by skutterudite,...     

The Gaojiacun Mafic-Ultramafic Complex （Sichuan, SW China）：Neoproterozoic Magmatic Activity at the Western Margin of the Yangtze Craton

1 Introduction The Gaojiacun intrusive complex is one of the numerous ultramafic-mafic intrusions in Sichuan Province of China. It was mapped during the 1970s and studied mainly by Chinese scientists (e.g. Geological Team 106, 1975; Shen et al., 1986, 1989; CGGJC, 1986; Yang et al., 1993; Li et al., 1995; Shen et al., 2003; Zhu et al., 2004a). Since the year 2000, China has become one of the largest PGE consumers. While the country can produce only less than 1 ton PGE/year, the Chin…     

The thermal maturity of sedimentary basins as revealed by magnetic mineralogy

The thermal evolution of sedimentary basins is usually constrained by maturity data, which is interpreted from Rock-Eval pyrolysis and vitrinite reflectance analytical results on field or boreholes samples. However, some thermal evolution models may be inaccurate due to the use of elevated maturities measured in samples collected within an undetected metamorphic contact aureole surrounding a magmatic intrusion. In this context, we investigate the maturity and magnetic mineralogy of 16 claystone samples from Disko-Svartenhuk Basin, part of the SE Baffin Bay volcanic margin. Samples were collected within thermal contact metamorphic aureoles near magma intrusions, as well as equivalent reference samples not affected by intrusions. Rock-Eval pyrolysis (T_max), and vitrinite reflectance (Ro) analysis were performed to assess the thermal maturity, which lies in the oil window when 435°C ≤ T_max ≤ 470°C and 0.6%–0.7% ≤ Ro ≤ 1.3%. In addition, we performed low- (<300K) and high-temperature (>300K) investigations of isothermal remanent magnetization to assess the magnetic mineralogy of the selected samples. The maturity results (0.37% ≤ Ro ≤ 2%, 22°C ≤ T_max ≤ 604°C) show a predominance of immature to early mature Type III organic matter, but do not reliably identify the contact aureole when compared to the reference samples. The magnetic assemblage of the immature samples consists of iron sulphide (greigite), goethite and oxidized or non-stoichiometric magnetite. The magnetic assemblage of the early mature to mature samples consists of stoichiometric magnetite and fine-grained pyrrhotite (<1 μm). These results document the disappearance of the iron sulphide (greigite) and increase in content of magnetite during normal burial. On the other hand, magnetite is interpreted to be the dominant magnetic mineral inside the contact aureole surrounding dyke/sill intrusions where palaeotemperatures indicate mature to over-mature state. Interestingly, the iron sulphide (greigite) is still detected in the contact aureole where palaeotemperatures exceeded 130°C. Therefore, the magnetic mineralogy is a sensitive method that can characterize normal burial history, as well as identify hidden metamorphic contact aureoles where the iron sulphide greigite is present at temperatures beyond its stability field.     

Abundance and Taxonomic Diversity of Bacteria Inhabiting the Sediment-Water Interface in a Marine Harbor Channel

Ocean Science Journal - The abundance of bacteria inhabiting the sediment-water interface and their taxonomic composition were determined with the fluorescence in situ hybridization (FISH) method...     

A GIS-based WFD oriented typology of shallow micro-tidal soft bottom using wave exposure and turbidity mapping

Our GIS based project aims at producing a classification scheme to develop a typology of the bottom of the Bay of Gdansk in the southern Baltic. The typology was based on the abiotic factors which are used to define water body types by the European Water Framework Directive (WFD). Significance analysis of particular factors has shown that within the discussed area wave exposure seems to play the most important role. All other factors are to a greater or lesser degree correlated with these two. Taking into consideration the shallows and the varied coastline of the investigated area it was decided to make use of the SWAN numerical wave model to determine the influence of wave impact upon the bottom. The model was used to produce raster maps of orbital velocity near the bottom for each wind scenario. With the help of the GIS analysis the maps were turned into layers: the mean velocity and the maximum velocity at the bottom. To produce the layer of yearly amount of solar radiation a GIS model was built which main parameters were the layer of depth and three layers of turbidity for three seasons. The layers of the maximum orbital velocity and of the solar radiation at the bottom were then used in a classificatory procedure consisted in an iterative sequence of the three following steps: cluster formation, dendrogram analysis and classification using the maximum likelihood method. Ecological importance of the classification has been obtained by means of the aggregation of a part of classes based upon the statistics calculated for them within the GIS system with the help of the zonal function out of the following parameters: salinity, depth, mean and maximum orbital velocity at the bottom, temperature differences between warm and cold seasons, solar radiation, and type of sediments. The method proposed here makes it possible to produce high resolution thematic maps of the bottom even with incomplete data cover of the investigated area.     

Dissolved organic carbon in the southern Baltic Sea: Quantification of factors affecting its distribution

During a cruise of r/v ‘Oceania’ in May 2006, seven vertical dissolved organic carbon (DOC) concentration profiles were produced against a background of CTD, chlorophyll a (chl a) and phaeopigment concentration profiles. The results indicate distinct vertical and spatial DOC fluctuations, ranging from 248 ± 7 μmol C dm⁻³ at 70 m depth at the westernmost station G/06 to 398 ± 5 μmol C dm⁻³ at 5 m depth at station A/06 in the western Gulf of Gdańsk. DOC concentrations were the highest at 10 m depth, where phytoplankton activity was relatively intensive, as reflected by the active chl a concentration distribution. DOC concentrations decreased towards the sea bottom.     

Variation in Coronal Activity from Solar Cycle 24 Minimum to Maximum Using Three-Dimensional Reconstructions of the Coronal Electron Density from STEREO/COR1

Three-dimensional electron density distributions in the solar corona are reconstructed for 100 Carrington rotations (CR 2054?–?2153) during 2007/03?–?2014/08 using the spherically symmetric method from polarized white-light observations with the inner coronagraph (COR1) onboard the twin Solar Terrestrial Relations Observatory (STEREO). These three-dimensional electron density distributions are validated by comparison with similar density models derived using other methods such as tomography and a magnetohydrodynamics (MHD) model as well as using data from the Solar and Heliospheric Observatory (SOHO)/Large Angle and Spectrometric Coronagraph (LASCO)-C2. Uncertainties in the estimated total mass of the global corona are analyzed based on differences between the density distributions for COR1-A and -B. Long-term variations of coronal activity in terms of the global and hemispheric average electron densities (equivalent to the total coronal mass) reveal a hemispheric asymmetry during the rising phase of Solar Cycle 24, with the northern hemisphere leading the southern hemisphere by a phase shift of 7?–?9 months. Using 14 CR (\(\approx13\)-month) running averages, the amplitudes of the variation in average electron density between Cycle 24 maximum and Cycle 23/24 minimum (called the modulation factors) are found to be in the range of 1.6?–?4.3. These modulation factors are latitudinally dependent, being largest in polar regions and smallest in the equatorial region. These modulation factors also show a hemispheric asymmetry: they are somewhat larger in the southern hemisphere. The wavelet analysis shows that the short-term quasi-periodic oscillations during the rising and maximum phases of Cycle 24 have a dominant period of 7?–?8 months. In addition, it is found that the radial distribution of the mean electron density for streamers at Cycle 24 maximum is only slightly larger (by \(\approx30\%\)) than at cycle minimum.     

Numerical prediction of an intense convective system associated with the July 1987 montreal flood. part II: A trailing stratiform rainband

Abstract

In this study, the internal circulation structures of the 14 July 1987 intense mesoscale convective system (MCS) are investigated using an improved high‐resolution version of the Canadian regional finite‐element model. It is found that although the MCS is characterized by a leading convective line followed by a trailing stratiform rainband, the associated circulation structures differ substantially from those in the classical midlatitude squall system. These include the rapid propagation and separation of the leading convection from the trailing rainband, the development of a surface‐based instead of an elevated rear‐to‐front descending flow and a shallow front‐to‐rear ascending flow associated with the stratiform precipitation, the generation of low‐ and mid‐level rather than mid‐ to upper‐level stratiform cloudiness and the development of a strong anticyclonic vorticity band at the back edge of the stratiform region. It is shown that the trailing stratiform rainband is dynamically forced by frontogenetical processes, and aided by the release of conditional symmetric instability and local orographical lifting. The intense leading and trailing circulations result from latent heat released by the convective and explicit cloud schemes, respectively. Sensitivity experiments reveal that the proper coupling of these two cloud schemes is instrumental in obtaining a realistic prediction of the above‐mentioned various mesoscale components. Vorticity budget calculations show that tilting of horizontal vorticity contributes the most to the amplification of the anticyclonic vorticity band, particularly during the squall's incipient stage. The sensitivity of the simulated squall system to other model physical parameters is also examined.     

Numerical analysis of frost effects in porous media. Benefits and limits of the finite element poroelasticity formulation

The aim of this paper is to analyse the performance of a finite element formulation usable for predicting the mechanical consequences of frost effects on porous media. It considers the characteristics of porous media and how the frost action can be assessed. The problem is then separated into two parts: thermal and poromechanical calculations. The constitutive equations developed in the framework of poromechanics are presented and the implementation in a usual finite element poroelasticity formulation based on Zuber's method is adopted. An analysis of the time‐step influence on the convergence rate is given and leads us to propose a simple method in order to obtain objectivity of the finite element response and avoid over‐long calculations. Frost effect simulations are carried out on real porous media (two fired clays) as a case study. Although the experimental behaviour of the porous media subjected to frost action is in accordance with some observations, the calculated strains appear to be overestimated compared with measurements. The problem could be largely attributable to the difficulty of assessing permeability evolution during frost development. Copyright © 2011 John Wiley & Sons, Ltd.